• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.112-120
• /
• 2011

The out-of-phase thermo-mechanical fatigue (OP TMF) in a <001> oriented single crystal nickel-based superalloy CMSX-4 has been studied. OP TMF life was less than a half of low cycle fatigue(LCF) life in spite of a small hysteresis loop area of OP TMF compared to that of LCF. The failure was caused by the initiation of a crack at the oxide-layered surface followed by its planar growth along the <100> ${\gamma}$ channel in both LCF and OP TMF. However, deformation twins appeared near the major crack of OP TMF. The multiple groups of parallel twin plates on {111} planes provided a preferential path for crack propagation, which caused a significant decrease in OP TMF life. Additionally, the analysis on the surface crack morphology revealed that the tensile strain at the minimum temperature of OP TMF was found to accelerate the crack propagation.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.201-202
• /
• 2004

고성능 복합 차음패널 개발을 위해 다양한 복합패널의 차음 성능을 측정하고 이를 토대로 최적의 설계변수를 도출하여 , 설계제한조건 내에서 최대의 차음성능을 갖는 복합차음패널을 개발하였다. 특히, 본 연구에서는 Mini-chamber를 이용함으로서, 차음측정을 위해 사용되는 $10m^{2}$ 이상의 시편 대신 $0.6m^{2}$ 의 시편을 사용함으로써, 시편 제작비 및 개발기간을 대폭 줄일 수 있었다. 주요 설계안으로서 stud를 최적화 한 결과, Mini-Chamber에서는 약 5dB의 차음 성능을 향상 시킬 수 있었으며, 잔향실 측정의 경우 약 $2^{-3}dB$의 차음 성능이 향상되었다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.48-69
• /
• 1997

The use of advanced composite materials in many engineering structures has steadily increased during the last decade. Advanced composite materials allow the design engineer to tailor the directional stiffness and the strength of materials as required for the structures. Design variables to the design engineer include multiple material systems. ply orientation, ply thickness, stacking sequence and boundary conditions, in addition to overall structural design parameters. Since the vibration and impact strength of composite cylindrical shell is an important consideration for composite structures design, the reliable prediction method and design methodology should be required. In this study, the optimum design of composite cylindrical shell for maximum natural frequency, buckling strength and impact strength are developed by analytic and numerical method. The effect of parameters such as the various composite material orthotropic properties (CFRP, GFRP, KFRP, Al-CFRP hybrid), the stacking sequences, the shell thickness, and the boundary conditions on structural characteristics are studied extensively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.159-167
• /
• 2009

In this paper, we consider a single-vendor single-buyer supply chain problem where a single vendor orders raw materials from its supplier, then using its manufacturing processes converts the raw materials to finished goods in order to deliver finished goods to a single buyer for effective implementation of Just-In-Time Purchasing. An integrated lot-splitting model of facilitating multiple shipments in small lots between buyer and supplier is developed in a JIT Purchasing environment. Also, an iterative heuristic solution procedure is developed to find the order quantity for finished goods and raw materials, and number of shipments between buyer and supplier. We show by numerical example that when the integrated policy is adopted by both vendor and buyer in a cooperative manner, both parties can benefit.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.1-1
• /
• 1992

Shape Memory Alloys have attracted the interest of a great number of researchers in the world, and Mexico is not the exception. Research in this field started ten years ago, and is actually an active line covering the classical Cu-based and Ti-Ni alloys, but also the new Fe-based alloys. Although more basic studies have been performed at the present time, interest for applied research and technological goals is increasing. In this work we present a series of studies carried on these Shape Memory Alloys by the groups in Mexico, and explain what the interest of our groups are in the next future in this are of the Materials Science. Interdisciplinary work has been necessary in the characterization of the different alloys, and multiple techniques have been used, like Mossbauer spectroscopy, thermoelectric power, electron microscopy, ultrasound techniques, neutron and x-ray diffraction, calorimetry, among others. Collaboration With other groups in Europe and in the United States have become highly useful and productive, and some examples of such activities are also reported.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.1
• /
• pp.69-79
• /
• 2003

The Purpose of this study is to investigate the cognition and experience of sexual violence and to Present the influential factors of the cognition of sexual violence. The subjects were 835 high school students living in Kwangiu and Chonnam. The data analysis used Mean. Standard Deviation, T-test. F-test. and Multiple Regression Analysis The major findings is as follows : 1 There are meaningful differences in the experience of sexual violence between male and female adolescents. 2. There are meaningful differences in the cognition of sexual violence in sex. sex-role attitude. experience of obscene materials and sex education. 3. The variables which affect cognition of sexual violence is sex-role attitude, sex and experience of obscene materials that were explained about 10%.

• English Language & Literature Teaching
• /
• v.13 no.4
• /
• pp.233-252
• /
• 2007

The aim of this study is to propose a systematic way of evaluating competing ELT textbook series. Three stages of evaluation procedures were employed: A sample of two sets of English textbook series for young learners were first analysed by five trained textbook evaluators using a checklist. Second, based on the results of analysis, evaluative discussion was carried out. Third, two independent evaluators conducted impressionistic evaluation on the series. The procedure employed in this materials evaluation process can be adapted in choosing series of textbooks. Since not many studies have dealt the evaluation of textbook series by multiple evaluators, the method presented in this study can be referred to and applied by materials evaluators in other contexts.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.247-252
• /
• 2001

In this study, an aluminum electric motor car with a modular front end made of composite materials is numerically evaluated applying the standard specifications for the urban EMU(Electric Multiple Unit) train. Structural analyses under compressive load, torsional load and free vibration satisfy the standard specifications, but analysis under normal load doesn't. By the way, the aluminum bodyshell of the car except the modular front end is almost same to that of the Korean standard EMU, which satisfy the standard specifications. It is presumed that the stiffness of the modular front end made of composite materials haves some influence on the strength of the aluminum bodyshell.

• Journal of Environmental Health Sciences
• /
• v.8 no.1
• /
• pp.25-30
• /
• 1982

The incidence of hospital infection has been seriously increased in the general hospital in recent years. This study was performed on hospital air and materials in a General Hospital in Seoul from June to December in 1980. The results were as follows: 1. Air sampling was done in multiple strategic areas by exposing standard petridishes for 5 minutes. There was a significant difference of airborne microbe between places. ($F._{99}$ = 3.2, p < 0.01). 2. The mean colony count was 8.6$\pm$6.2 colonies / plate / 5 minutes. 3. Gram stains of colony in air sampling were Gram (+) cocci 66.5%. Gram (+) rod 18.4%, Gram (-) cocci 1.3%, Gram (-) rod 8.7% Fungus 4.5%. 4. For the evaluation of sterilization of steam sterilizer and ethylene oxide gas sterilizer, biological monitoring were done by commercial spore strip. Positive culture was obtained in 2 out of 41 tests on 3 steam sterilizers, and in 3 out of 13 tests on ethylene oxide gas sterilizer. 5. Product sampling and culture were done for 2 kinds of disinfectants and 30 sets of various operation package or dressing materials. Positive culture was obtained in one disinfectants.