• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1238-1243
• /
• 2007

The computational complexity for the zero-forcing (ZF)-based multiuser (MU) multiple-input multiple-output(MIMO) preprocessing matrices can be immoderately large as the number of transmit antennas or users increases. In this paper, we show that the span of singular vector space of a matrix can be obtained from the singular vectors of the parted rows of that matrix with computational saving and propose a computationally efficient recursive-algorithm for achieving the ZF-based preprocessing matrices. Analysis about the complexities shows that a new recursive-algorithm can lighten the computational load.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.680-683
• /
• 2006

One objective in developing the next generation of wireless communication systems is to increase data rates and reliability. A promising way to achieve this is to combine multiple-input and multiple-output signal processing with a space-time coding scheme, which offers higher coding and diversity gains and improves the spectrum efficiency and reliability of a wireless communication system. It is noted, however, that time delay differences and phase differences among different channels increase symbol interference and degrade system performance. In this letter, we investigate phase differences and their effects on multiple-input and multiple-output systems, and propose a compensation algorithm for the Rayleigh fading model to minimize their effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.494-499
• /
• 2009

In this paper, we provide an efficient method of user selection for achieving the maximum system throughput in downlink multiuser Multiple-Input Multiple-Output (MIMO) systems. A proposed method is for selecting a fine user set only with powers of each user channel and angles between them. This algorithm is simpler than SUS because there is no considering about the optimal value of correlation. The proposed method finds the user set toward maximizing system throughput, so it has high performance.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.203-212
• /
• 2023

In this study, we developed a co-located and space-shared multiple-input multiple-output (MIMO) antenna module with a modular design and high integration level. The proposed antenna pair includes a half-wavelength loop antenna and a dipole-type antenna printed on the front and back sides of a compact modular board. Owing to their modal orthogonality, these two independent antenna elements are highly self-isolated and free of additional decoupling components, even though they are assembled at the same location and within the same space. Thus, the proposed antenna is attractive in 5G MIMO systems. Furthermore, the proposed co-located and space-shared MIMO antenna module was employed in a 5G smartphone to verify their radiation and diversity performances. A 12 × 12 MIMO antenna system was simulated and fabricated using the proposed module. Based on the results, the proposed module can be employed in large-scale MIMO antenna systems for current and future terminal devices owing to its high integration, compactness, simple implementation, and inherent isolation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• Journal of electromagnetic engineering and science
• /
• v.18 no.3
• /
• pp.145-153
• /
• 2018

In this paper, the efficiency of single-input multiple-output (SIMO) wireless power transfer systems is examined. Closed-form solutions for the receiver loads that maximize either the total efficiency or the efficiency for a specific receiver are derived. They are validated with the solutions obtained using genetic algorithm (GA) optimization. The optimum load values required to maximize the total efficiency are found to be identical for all the receivers. Alternatively, the loads of receivers can be adjusted to deliver power selectively to a receiver of interest. The total efficiency is not significantly affected by this selective power distribution. A SIMO system is fabricated and tested; the measured efficiency matches closely with the efficiency obtained from the theory.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.194-204
• /
• 2006

This contribution focuses on the maximum likelihood (ML) noncoherent synchronization of multi-antenna transceivers working in faded environments and employing ultra-wideband impulse radio (UWB-IR) transmit technology. In particular, the Cramer-Rao bound (CRB) is derived for the general case of multiple input multiple output (MIMO) UWB-IR systems and used to compare the ultimate performance of three basic transmit schemes, thereinafter referred to as single input multiple output (SIMO), MIMO equal signaling (MIMO-ES), and MIMO orthogonal signaling (MIMO-OS) ones. Thus, the noncoherent ML synchronizer is developed for the better performing transmit scheme (i.e., the SIMO one) and its performance is evaluated under both signal acquisition and tracking operating conditions. The performance gain in the synchronization of UWB- IR signals arising by the utilization of the multi-antenna technology is also evaluated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.447-450
• /
• 2009

In this paper, binary pulse-antipodal modulation (2PAM) direct-sequence (DS) ultra-wideband (UWB) system is applied to multiple input multiple output (MIMO) system using vertical bell lab layered space-time (V-BLAST) structure to achieve high-data-rate communications over indoor wireless channels. The relationship between antenna dimension and BER performance of 2PAM DS UWB MIMO system is discussed. In the receiver of UWB-MIMO system, various MIMO detection algorithms such as zero-forcing (ZF), ZF-ordered successive interference cancellation (OSIC), minimum-mean-square-error (MMSE), MMSE-OSIC and maximum likelihood (ML) are comparatively studied.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1889-1910
• /
• 2017

This paper investigates a protocol so-called Adaptive Harvest Then Transmit (AHTT) for wireless powered communication networks (WPCNs) in multiple-input single-output (MISO) downlink systems, which assists in transmitting signals from a multi-antenna transmitter to a single-antenna receiver. Particularly, the power constrained relay is supplied with power by utilizing radio frequency (RF) signals from the source. In order to take advantage of multiple antennas, two different linear processing schemes, including Maximum Ratio Combining (MRC) and Selection Combination (SC) are studied. The system outage capacity and ergodic capacity are evaluated for performance analysis. Furthermore, the optimal power allocation is also considered. Our numerical and simulation results prove that the implementation of multiple antennas helps boost the energy harvesting capability. Therefore, this paper puts forward a new way to the energy efficiency (EE) enhancement, which contributes to better system performance.