• 제목/요약/키워드: multiple corresponding analysis

검색결과 214건 처리시간 0.027초

SPECAN 알고리즘을 이용한 Radatsat-1 ScanSAR Quick-look 신호 처리 및 검증 알고리즘 구현 (Radarsat-1 ScanSAR Quick-look Signal Processing and Demonstration Using SPECAN Algorithm)

  • 송정환;이우경;김동현
    • 대한원격탐사학회지
    • /
    • 제26권2호
    • /
    • pp.75-86
    • /
    • 2010
  • 최근 세계적으로 고성능의 위성 지구관측 시스템의 운용이 증가되고 Chandrayaan이나 LRO처럼 달탐사 위성에서도 SAR 영상신호 자료의 활용도가 높아지면서 국내에서도 SAR 관련 연구에 대한 관심이 고조되고 있다. 하지만 대부분의 국내 SAR 관련 연구는 주로 영상의 후처리 및 활용에 관한 것이 주를 이루며, SAR 원시 데이터를 직접 처리하는 영상 형성에 관한 연구는 대부분 스트립맵(stripmap) 모드에 한정되어 있다. 2010년 발사를 앞두고 있는 국내 최초의 SAR 위성인 다목적위성 5호는 고해상도 모드와 ScanSAR 모드를 동시에 운용할 예정이며 이에 따라 해당 영상을 처리하고 분석하는데 많은 수요가 발생할 것으로 예상되고 있으나 현재까지 ScanSAR와 관련된 국내 연구는 매우 취약한 상태라고 볼 수 있다. 본 논문에서는 향후 발생하게 될 위성 SAR의 원시자료 처리 요구에 대응할 수 있는 ScanSAR 영상처리 기법을 소개하고 실제 위성 ScanSAR 원시자료에 적용하여 신호처리를 수행한 결과를 제시한다. 이를 위해 SPECAN 알고리즘을 사용한 SAR 원시데이터 처리 시스템을 개발하고 RADARSAT-1 위성의 ScanSAR 원시자료에 대한 Quick-look 신호처리를 수행하였다. 최종적으로 한반도 ScanSAR 영상처리 결과를 제시하고 기존 full aperture 데이터를 처리하는 방식과 비교하여 본 논문에서 제시된 방법의 장단점과 효율성에 대해 설명한다.

소나무 원목의 천연건조 중 함수율 변화: I. 국내 주요지역의 유효천연건조일수 조사 (Moisture Content Change of Korean Red Pine Logs During Air Drying: I. Effective Air Drying Days in Major Regions in Korea)

  • HAN, Yeonjung;EOM, Chang-Deuk;LEE, Sang-Min;PARK, Yonggun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권6호
    • /
    • pp.721-731
    • /
    • 2019
  • 천연건조는 건조되는 목재의 수종, 밀도와 크기, 천연건조장의 위치조건과 함께 건조지역의 기상인자를 고려해야 한다. 우리나라와 같이 4계절의 구분이 있는 지역은 여름과 겨울의 온도 및 상대습도의 차이가 크기 때문에 기상인자에 대한 연구가 필요하다. 본 연구에서는 소나무 원목의 천연건조 중 함수율 변화를 분석하기 위한 기초자료로 국내 24지역의 1988년부터 2017년까지 30년간 월별 평균 기온, 상대습도, 풍속의 기상인자를 이용하여 유효천연건조일수를 산출하였다. 24지역의 유효천연건조일수는 239 - 291일 범위로 평균값은 265일이었다. 이 결과는 1955년부터 1984년까지의 기상인자로 산출된 유효천연건조일수의 평균인 260일 비하여 약 5일 증가한 값이다. 유효천연건조일수와 기상인자들의 다중회귀분석 결과, 유효천연건조일수에 영향을 미치는 기상인자는 온도, 상대습도, 풍속의 순서였다. 지역별로 산출된 유효천연건조일수를 이용하여 우리나라를 4개의 유효천연건조일수대로 구분한 결과, 유효천연건조일수대가 지구온난화의 영향으로 선행연구에서 제시된 것에 비하여 위도상 북쪽으로 상승하였다. 서울지역에서 수행된 소나무 원목의 천연건조 중 함수율 분포를 예측하기 위한 기초자료로 2016년부터 2018년까지 3년간의 월별 평균온도, 상대습도, 풍속의 기상인자를 제시하고, 그에 따른 평형함수율 변화를 조사하였다.

Effect of visual marbling levels in pork loins on meat quality and Thai consumer acceptance and purchase intent

  • Noidad, Sawankamol;Limsupavanich, Rutcharin;Suwonsichon, Suntaree;Chaosap, Chanporn
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권12호
    • /
    • pp.1923-1932
    • /
    • 2019
  • Objective: We investigated visual marbling level (VML) influence on pork loin physicochemical traits, consumer palatability responses, VML liking, purchase intent, and their relationships. Methods: For each of five slaughtering dates, at 24-h postmortem, nine paired Duroc castrated male boneless Longissimus dorsi (LD) muscles were categorized into low (LM, score 1 to 2, n = 3), medium (MM, score 3 to 4, n = 3), and high (HM, score 5 to 6, n = 3) VML. Meat physicochemical quality traits and consumer responses (n = 389) on palatability and VML liking, and purchase intent were evaluated. The experiment was in randomized complete block design. Analysis of variance, Duncan's multiple mean comparisons, and correlation coefficients were determined. Results: VML correspond to crude fat (r = 0.91, p<0.01), but both were reversely related to moisture content (r = -0.75 and -0.91, p<0.01, respectively). As VML increased, ash (p<0.05) and protein (p = 0.072) decreased, pH and $b^{\star}$ increased (p<0.05), but drip, cooking (p<0.05) and thawing (p = 0.088) losses decreased. Among treatments, muscle fiber diameter, sarcomere length, total and insoluble collagen contents, $L^{\star}$, and $a^{\star}$ did not differ (p>0.05). Compared to the others, HM had lower collagen solubility percentage (p<0.05), but similar (p>0.05) Warner-Bratzler shear force (WBSF). No differences (p>0.05) were found in juiciness, overall flavor, oiliness, and overall acceptability, but HM was more tender (p<0.05) than the others. Based on VML, consumers preferred MM to HM (p<0.05), while LM was similar to MM and HM (p>0.05). Corresponding to VML preference (r = 0.45, p<0.01), consumers (83%) would (p<0.01) definitely and probably buy MM, over LM (74%), and HM (68%), respectively. Conclusion: Increasing VML in pork LD altered its chemical composition, slightly increased pH, and improved water holding capacity, thereby improving its tenderness acceptability. Marbling might reduce chewing resistance, as lower collagen solubility in HM did not impact tenderness acceptability and WBSF. While HM was rated as most tender, consumers visually preferred and would purchase MM.

대도시 폭염의 기후-보건학적 특성에 기반한 고온건강경보시스템 개발 (Development of Heat-Health Warning System Based on Regional Properties between Climate and Human Health)

  • 이대근;최영진;김규랑;변재영
    • 한국기후변화학회지
    • /
    • 제1권2호
    • /
    • pp.109-120
    • /
    • 2010
  • 극단적 폭염은 온대지역의 여름철 사망률과 유병률을 증가시키는 기상재해이다. 기후모델의 예측결과에 따르면 미래 폭염의 강도와 빈도는 더욱 증가할 것으로 보고되고 있다. 이 연구는 국내 7개 대도시의 폭염유발기단과 일 사망률의 증가와의 연관성을 제시하며, 이를 기반으로 운영 중인 고온건강경보시스템을 소개한다. 1982년에서 2007년까지 관측된 기후자료로부터 종관기단분류기법이 적용되어 각 도시의 여름철의 각 날에 대한 기단분류가 수행되었다. 폭염유발기단과 일 사망률 증가와의 연관성 연구 결과, 고온건조(DT) 기단과 고온다습+(MT+) 기단의 두 기단에서 가장 높은 사망률 증가 연관성이 관찰되었다. 따라서 DT와 MT+ 기단 내의 기상요소들을 이용하여 초과사망자수를 종속변수로 하는 중회귀 분석을 통한 초과사망자수 예측알고리즘이 제작되었다. 또한, 각 대도시들마다 다르게 나타나는 지역적인 기후순응 특성에 입각하여 각 도시별 예측알고리즘에서 사용되는 독립변수가 선정되고, 고온건강경보시스템의 고온건강주의보 및 경보 기준인 초과사망자수 기준이 설정되었다. 지구온난화 추세 하의 고온건강경보시스템은 대규모 건강이상을 야기할 수 있는 폭염에 대한 효과적인 정보를 대도시 시민들에게 제공할 것으로 기대된다.

베타-갈락토시데이즈를 이용하여 합성된 Benzyl Alcohol Galactoside의 NMR Spectroscopy 및 Mass spectrometry (NMR Spectroscopy and Mass Spectrometry of Benzyl Alcohol Galactoside synthesized using β-Galactosidase)

  • 이향렬;정경환
    • 한국응용과학기술학회지
    • /
    • 제36권1호
    • /
    • pp.84-89
    • /
    • 2019
  • 대장균 효소 ${\beta}$-gal를 이용하여 합성된 BzO-gal의 분자구조를 NMR ($^1H$-와 $^{13}C$-)과 고성능 mass spectrometry를 이용하여 분석하였다. BzO-gal은 $^1H$ NMR에서 14개의 proton으로부터 12개의 피크를 나타내었다. 방향족 고리에서 오는 5개의 proton 피크와 벤질기의 $CH_2$에서 오는 2개의 proton 피크는 벤질알코올이 존재함을 나타낸다. 지방족 사슬 영역인 ${\delta}_H$ 4.32 ~ 3.46 ppm에서 나타나는 7개의 proton 피크로부터 단당류가 도입되었음을 확인할 수 있었다. $^{13}C$ NMR 스팩트럼에서 나타난 11개의 carbon 피크도 또한 벤질알코올에 단당이 도입되었음을 나타낸다. BzO-gal의 분자량을 확인하기 위하여 mass spectrometry 로 분석한 결과 m/z가 293.0994인 BzO-gal의 sodium adduct ion($[M+Na]^+$)을 확인할 수 있었다. 이러한 결과를 바탕으로 세포독성이 감소된 첨가물 개발을 기대하고 있으며, 추가적인 후속연구를 진행할 예정이다.

Hysteretic characteristics of steel plate shear walls: Effects of openings

  • Ali, Mustafa M.;Osman, S.A.;Yatim, M.Y.M.;A.W., Al Zand
    • Structural Engineering and Mechanics
    • /
    • 제76권6호
    • /
    • pp.687-708
    • /
    • 2020
  • Openings in steel plate shear walls (SPSWs) are usually used for decorative designs, crossing locations of multiple utilities and/or structural objectives. However, earlier studies showed that generating an opening in an SPSW has a negative effect on the cyclic performance of the SPSW. Therefore, this study proposes tripling or doubling the steel-sheet-plate (SSP) layer and stiffening the opening of the SPSW to provide a solution to undesirable opening effects, improve the SPSW performance and provide the infill option of potential strengthening measures after the construction stage. The study aims to investigate the impact of SSP doubling with a stiffened opening on the cyclic behaviour, expand the essential data required by structural designers and quantify the SPSW performance factors. Validated numerical models were adopted to identify the influence of the chosen parameters on the cyclic capacity, energy dissipation, ductility, seismic performance factors (SPF) and stiffness of the suggested method. A finite Element (FE) analysis was performed via Abaqus/CAE software on half-scale single-story models of SPSWs exposed to cyclic loading. The key parameters included the number of SSP layers, the opening size ratios corresponding to the net width of the SSP, and the opening shape. The findings showed that the proposed assembly method found a negligible influence in the shear capacity with opening sizes of 10, 15, 20%. However, a deterioration in the wall strength was observed for openings with sizes of 25% and 30%. The circular opening is preferable compared with the square opening. Moreover, for all the models, the average value of the obtained ductility did not show substantial changes and the ultimate shear resistance was achieved after reaching a drift ratio of 4.36%. Additionally, the equivalent sectional area of the SSP in the twin and triple configuration of the SPSWs demonstrated approximately similar results. Compared with the single SSP layer, the proposed configuration of the twin SSP layer with a stiffened opening suggest to more sufficiency create SSP openings in the SPSW compared to that of other configurations. Finally, a tabular SPF quantification is exhibited for SPSWs with openings.

통영 세병관 초석의 암석학적 특성 및 비파괴 손상평가 (Petrological Characteristics and Nondestructive Deterioration Assessments for Foundation Stones of the Sebyeonggwan Hall in Tongyeong, Korea)

  • 한두루;김성한;박석태;이찬희
    • 자원환경지질
    • /
    • 제54권2호
    • /
    • pp.199-212
    • /
    • 2021
  • 세병관(국보 제305호)은 통영 삼도수군통제영에 위치하며, 1605년에 창건한 이래 최근까지 수차례의 중건, 중수, 보수 및 복원을 거쳤다. 연구대상인 세병관 초석은 모두 50개로 다양한 표면손상이 나타난다. 이 초석은 총 6개의 암종으로 구성되어 있으며, 대부분은 석영안산암질 래피리 응회암이다. 보수용 대체석 수급을 위한 산지해석 결과, 대부분의 암석은 초석과 산출상태, 기재적, 광물학적 및 전암대자율 등 암석학적으로 높은 동질성을 갖는 것으로 나타났다. 초석의 손상유형 중에는 표면의 박리와 박락이 가장 심한 것으로 나타났으며, 무기오염물 분석을 통한 손상메커니즘으로 볼 때 해풍 및 복합적인 환경에 의한 염풍화가 주된 원인으로 판단된다. 초석의 기계적 내구성으로 보아 현재 물성 저하로 부재의 교체가 필요한 것은 없으나 표면적인 손상을 늦추기 위한 보존처리가 필요할 것으로 보인다. 이 초석은 표면에 발생한 물리적 손상과 내부 결함을 유발하는 암석학적 요인이 복합적으로 작용하였다. 따라서 세병관의 장기적 보존을 위해서는 주기적인 상태 진단과 모니터링이 요구된다.

Prediction accuracy of incisal points in determining occlusal plane of digital complete dentures

  • Kenta Kashiwazaki;Yuriko Komagamine;Sahaprom Namano;Ji-Man Park;Maiko Iwaki;Shunsuke Minakuchi;Manabu, Kanazawa
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권6호
    • /
    • pp.281-289
    • /
    • 2023
  • PURPOSE. This study aimed to predict the positional coordinates of incisor points from the scan data of conventional complete dentures and verify their accuracy. MATERIALS AND METHODS. The standard triangulated language (STL) data of the scanned 100 pairs of complete upper and lower dentures were imported into the computer-aided design software from which the position coordinates of the points corresponding to each landmark of the jaw were obtained. The x, y, and z coordinates of the incisor point (XP, YP, and ZP) were obtained from the maxillary and mandibular landmark coordinates using regression or calculation formulas, and the accuracy was verified to determine the deviation between the measured and predicted coordinate values. YP was obtained in two ways using the hamularincisive-papilla plane (HIP) and facial measurements. Multiple regression analysis was used to predict ZP. The root mean squared error (RMSE) values were used to verify the accuracy of the XP and YP. The RMSE value was obtained after crossvalidation using the remaining 30 cases of denture STL data to verify the accuracy of ZP. RESULTS. The RMSE was 2.22 for predicting XP. When predicting YP, the RMSE of the method using the HIP plane and facial measurements was 3.18 and 0.73, respectively. Cross-validation revealed the RMSE to be 1.53. CONCLUSION. YP and ZP could be predicted from anatomical landmarks of the maxillary and mandibular edentulous jaw, suggesting that YP could be predicted with better accuracy with the addition of the position of the lower border of the upper lip.

Mass spectrometry와 NMR Spectroscopy를 이용한 1, 2-Octanediol Galactoside의 효소합성 확인 (Confirmation of Enzymatic Synthesis of 1, 2-Octanediol Galactoside using Mass Spectrometry and NMR Spectroscopy)

  • 이향렬;진홍종;안승혜;이혜원;정경환
    • 한국응용과학기술학회지
    • /
    • 제38권3호
    • /
    • pp.824-831
    • /
    • 2021
  • 안전한 화장품용 방부제에 대한 연구를 위하여 1, 2-octanediol (OD)에 galactose 한 분자가 결합된 1, 2-octanediol galactoside (OD-gal)의 합성을 시도하였다. 이를 위하여, 재조합 대장균의 β-galactosidase (β-gal)를 이용하여 transgalactosylation 반응을 수행하였으며, OD-gal 합성을 확인하기 위하여 mass spectrometry 분석과 NMR (1H- and 13C-) spectroscopy 분석을 실시하였다. 합성반응물에서 m/z=331.1732의 sodium adduct ion 형태로 OD-gal 분자의 합성을 확인하였고, 정제된 OD-gal의 NMR 분석을 통하여 OD-gal의 1H NMR 스펙트럼에서 OD에 갈락토실화가 되었음을 보여주는 다양한 피크를 확인하였다. 1H NMR 스펙트럼의 다운필드인 δH 4.39 ppm과 δH 3.98~3.55 ppm에서 나타나는 다양한 피크들은 이들이 OD에 갈락토실화가 되었다는 것을 잘 암시하고 있으며, 또한 1H NMR 스펙트럼의 업필드에서 나타나는 δH 1.52~1.26 ppm과 0.89 ppm의 피크는 OD의 CH2 와 CH3 작용기로 부터 나타나는 피크로써 OD가 본 물질에 존재함을 알 수 있었다. 13C NMR 스펙트럼에서는 OD-gal의 알파-아노머와 베타-아노머의 구조에서 기인하는 총 24개의 탄소피크가 나타났고, 각 아노머 마다 14개의 탄소가 존재하는데 이중 δc 31.4, 29.0, 22.3 그리고 13.7 ppm에 보이는 OD 4개의 탄소는 지방족 사슬의 끝부분에 해당하며 화학적 구조의 유사성으로 인하여 탄소 피크가 겹쳐서 나타난 것으로 보인다. 따라서 총 28개의 탄소 피크 중 24개가 나타났다. 마지막으로, 합성된 OD-gal의 β-gal을 이용한 가수분해 반응을 통하여 OD-gal에 gal이 결합되어 있다는 것을 확인하였다. 이러한 결과를 바탕으로 세포독성이 감소된 첨가물 개발을 기대하고 있으며, 추가적인 후속연구를 진행할 예정이다.

대장균 베타-갈락토시데이즈를 이용하여 합성된 1, 2-Hexanediol Galactoside의 NMR Spectroscopy 및 Mass spectrometry (NMR Spectroscopy and Mass Spectrometry of 1, 2-Hexanediol Galactoside synthesized using Escherichia coli β-Galactosidase)

  • 김이옥;이향렬;정경환
    • 한국응용과학기술학회지
    • /
    • 제33권2호
    • /
    • pp.286-292
    • /
    • 2016
  • 화장품용 방부제로 사용하고 있는 1, 2-hexanediol (HD)에 높은 농도의 lactose (300 g/l)를 넣고, 재조합 대장균 ${\beta}$-galactosidase (${\beta}$-gal)를 이용하여 galactose 한 분자를 결합시키는 transgalactosylation 반응을 시켜서, 1, 2-hexanediol galactoside (HD-gal)을 합성하였다. 그리고, 합성된 HD-gal 분자를 확인하기 위하여, HD-gal에 대한 NMR ($^1H$- and $^{13}C$-) 스펙트럼 분석과 mass 스펙트럼 분석을 실시하였다. HD-gal의 $^1H$ NMR 스펙트럼에서 HD에 갈락토실화가 되었음을 보여주는 다양한 피크를 확인하였다. $^1H$ NMR 스펙트럼의 다운필드인 ${\delta}_H$ 4.44 ppm과 ${\delta}_H$ 3.96~3.58 ppm에서 나타나는 다양한 피크들은 HD에 갈락토실화가 되었다는 것을 잘 암시하고 있으며, 또한 $^1H$ NMR 스펙트럼의 업필드에서 나타나는 ${\delta}_H$ 1.60~1.35 ppm과 0.92 ppm의 피크는 HD의 $CH_2$$CH_3$ 작용기로부터 나타나는 피크로써 HD가 본 물질에 존재한다는 것을 나타내고 있다. $^{13}C$ NMR 스펙트럼에서는 HD-gal의 알파-아노머와 베타-아노머의 구조에서 기인하는 총 21의 카본피크가 나타났고, 각 아노머마다 12개의 카본이 존재하는데 이중 ${\delta}_C$ 68.6, 60.9 and 13.2 ppm에 보이는 3개의 카본은 겹쳐서 나타나 총 24개의 피크 중 21개가 나타났다. 또한, 질량스펙트럼 분석에서는 protonated HD-gal인 281.1601 (m/z)의 peak를 확인할 수 있었다. 이를 종합하면, NMR ($^1H$- and $^{13}C$-) 스펙트럼 분석 결과와 질량분석 결과들은 우리가 기대했던 HD-gal의 구조와 매우 잘 일치하고 있다는 것을 알 수 있었다. 앞으로 추가적으로, 세균에 대한 minimum inhibitory concentrations (MICs) 조사와 human skin cell에 대한 독성연구를 추가적으로 진행할 예정이며, 이러한 결과를 근거로 항균력을 유지하면서 피부세포에 대한 독성이 감소된 화장품용 방부제의 연구/개발이 계속되기를 기대하고 있다.