• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.141-145
• /
• 1998

This paper CMOS full adder design method based on carry-propagation-free addition trees and a circuit technique, so called multiple-valued current-mode (MVCM) circuits. The carry-paopagation-free addition method uses a redundant digit sets called redundant positive-digit number representations. The carry-propagation-free addition is by three steps, and the adder can be designed directly and efficiently from the algorithm using MVCM circuit. We demonstrate the effectiveness of the proposed method through simulation(SPICE).

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.104-109
• /
• 2016

In this paper, a localization method for multiple robots based on Bayesian inference is proposed when multiple robots adopting multi-RAT (Radio Access Technology) communications exist in cognitive radio networks. Multiple robots are separately defined by primary and secondary users as in conventional mobile communications system. In addition, the heterogeneous spectrum environment is considered in this paper. To improve the performance of localization for multiple robots, a realistic multiple primary user distribution is explained by using the probabilistic graphical model, and then we introduce the Gibbs sampler strategy based on Bayesian inference. In addition, the secondary user selection minimizing the value of GDOP (Geometric Dilution of Precision) is also proposed in order to overcome the limitations of localization accuracy with Gibbs sampling. Via the simulation results, we can show that the proposed localization method based on GDOP enhances the accuracy of localization for multiple robots. Furthermore, it can also be verified from the simulation results that localization performance is significantly improved with increasing number of observation samples when the GDOP is considered.

• Journal of the Korean Statistical Society
• /
• v.31 no.2
• /
• pp.163-175
• /
• 2002

An extended version of the minimax eccentricity factor estimation for multiple set case is proposed. In addition, two more simple methods for multiple set factor analysis exploiting the concept of generalized canonical correlation analysis is suggested. Finally, a certain connection between the generalized canonical correlation analysis and the multiple set factor analysis is derived which helps us clarify the relationship.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.96-104
• /
• 1998

It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5％ of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5％ of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0％ in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85％ of glucose was added selectively within inner aqueous phase.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1738-1741
• /
• 1997

This paper addresses the issue fo target classification and localization with a SONAR for mobiler robot indoor navigation. In particular, multiple refetions of SONAR sound are used actively and interntionally. As for the SONAR sensor, the multiple reflection has been generally considered as one of the noisy phenomena, which is inevitable in the indoor environments. However, these multiple reflections can be a clue for classifying and localizing targets in the indoor environment if those can be controlled and used well. This paper develops a new SONAR sensor module with a reflection plane which can actively create the multiple refection. This paper also intends to suggest a new target classification emthod which uses the multiple refectiions. We approximate the world as being two dimensional and assume that the targets consisting of the indoor environment are pland, corner, and edge. Multiple reflection paths of an acoustic bean by a SONAR are analyzed, by simulations and the patterns of the TOPs (Time Of Flight) and angles of multiple reflections from each target are also analyzed. In addition, a new algorithm for target classification and localization is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.73.5-73
• /
• 2001

In this paper, we present a procedure to design the robust optimal supervisor which has the minimal cost in the sense of average for a given multiple-modelled discrete event system DES. In order to design the robust optimal supervisor, we extend the optimal supervisor design algorithm for a deterministic DES to the case of multiple-modelled DESs. In addition, using the proposed algorithm with modified costs of events and penalities of states, we can show whether a robust supervisor for a given multiple-modelled DES exists and design the minimally restricted robust supervisor.

• Information and Communications Magazine
• /
• v.24 no.5
• /
• pp.107-123
• /
• 2007

Multiple antenna technologies have received high attention in the last few decades for their capabilities to improve the overall system performance. Multiple-input multiple-output systems include a variety of techniques capable of not only increase the reliability of the communication but also impressively boost the channel capacity. In addition, smart antenna systems can increase the link quality and lead to appreciable interference reduction.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.107-116
• /
• 2007

In this paper, we present a method on the construction of multiple-valued circuits using Reed-Muller Expansions(RME). First, we discussed the input output interconnection of multiple valued function using Perfect Shuffle techniques and Kronecker product and designed the basic cells of performing the transform matrix and the reverse transform matrix of multiple valued RME using addition circuit and multiplication circuit of GF(4). Using these basic cells and the input-output interconnection technique based on Perfect Shuffle and Kronecker product, we implemented the multiple valued logic circuit based on RME. The proposed design method of multiple valued RME is simple and very efficient to reduce addition circuits and multiplication circuits as compared with other methods for same function because of using matrix transform based on modular structures. The proposed design method of multiple valued logic circuits is simple and regular for wire routing and possess the properties of concurrency and modularity of array.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.543-548
• /
• 2020

The purpose of this study is to implement various movements of multiple objects using a small number of power devices in producing a kinetic design, achieving an effect similar to a work comprised of multiple objects controlled using multiple power devices. While it is more typical to control various objects using multiple power devices, the use of multiple devices leads to higher costs and heavier overall weight. In addition, more power is required to operate the multiple power devices. This study applied a mechanism that allows multiple objects to perform various movements using a small number of power devices. The mechanism significantly reduces overall weight and power consumption. In addition, various movements could be expressed by increasing the rows and columns of objects through the use of the camshaft structure that changed the position and shape of the cam and the use of bevel gears. The significance of this study lies in presenting a new method of controlling multiple objects for designers involved in kinetic design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3258-3275
• /
• 2015

The rise in recent technology has changed the ways, in which people communicate with one another. Social networking services (SNSs) have become one of the most representative means. General SNSs allow users to create their own unique profiles, search for fellow members, share information, etc., while other SNSs have functions that cater to different needs of users. As a result, users of SNSs have begun to pick and choose different SNSs and concurrently use multiple SNSs in order to fulfill all their needs. This exploratory study examined which SNSs are used together and the characteristics that predict the use of multiple SNSs. In addition, it observed the differences between consumers' usage of multiple SNSs in different cultures. An online survey was administered to SNS users in the United States and Korea. The results of the study showed that the use of multiple SNSs is not yet prevalent in Korea, the country that represented a collectivistic culture. In addition, in the U.S., the highest number of users reported that they were active on at least three SNSs.