• Korean Journal of Digital Imaging in Medicine
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2005

Modern hospitals have been greatly facilitated with information technology (IT) such as hospital information system (HIS). One of the most prominent achievements is medical imaging and image data management so-called Picture Archiving and Communication Systems (PACS). Due to inevitable use of diagnostic images (such as X-ray, CT, MRI), PACS made tremendous impact not only on radiology department but also nearly all clinical departments for exchange and sharing image related clinical information. There is no doubt that better use of PACS leads to highly efficient clinical administration and hospital management. However, due to rapid and widespread acceptance of PACS storage and management of digitized image data in hospital introduces overhead and bottleneck when transferring images among clinical departments within and/or across hospitals. Despite numerous technical difficulties, financing for installing PACS is a major hindrance to overcome. In addition, a mirroring or a clustering backup can be used to maximize security and efficiency, which may not be considered as cost-effective approach because of extra hardware expenses. In this study therefore we have developed a new based on grid of distributed PACS in order to balance between the cost and network performance among multiple hospitals.

• Journal of the Korean Society of Radiology
• /
• v.83 no.5
• /
• pp.1182-1188
• /
• 2022

We call hemangiomatosis if hemangioma arises multifocally from single or multiple organs. It develops predominantly on liver, and there are just few cases of hemangiomatosis from greater omentum and mesentery. Herein, we present the imaging and histopathological findings including CT and MRI images of a 62-year-old male patient with a hemangiomatosis on liver, greater omentum and mesentery.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.19-24
• /
• 2010

Purpose: To study the efficacy of marker match with using kilovoltage (KV) X-ray among multiple image guidance that referring tree fiducial marker in radiation therapy for prostate cancer patients. Materials and Methods: KV two-dimantional images (anterior-posterior, right-left) and cone-beam CT volumetric images were acquired after setup for patients with three fiducial markers. Compare the position of the fiducial marker of reference plan computed tomography (CT) and of KV, CBCT images; then decide the shift score of X, Y, and Z. This study executed 5 times on 10 patients and analyzed the shift value. Results: In the radiation therapy using fiducial marker, The function of marker match showed the same direction tendency as the CBCT, and showed X, Y, Z difference of about 0.6, 0.7, and 0.8 (unit: mm). Conclusion: Comparing to this, the result of shift value using 2D marker match showed less than 1.0 mm difference. The function of marker match is considered more useful in time-wise and effective dose rather than CBCT. Therefore, Both methods are used to treat patients for prostate cancer.

• Journal of Trauma and Injury
• /
• v.18 no.2
• /
• pp.119-126
• /
• 2005

Background: Blunt thoracic trauma in children has a high morbidity and mortality. In this study, we assessed the significance of the injury pattern, mechanism and initial status in emergency department on severity and prognosis in pediatric blunt thoracic trauma patients. Method: We retrospectively reviewed medical records and chest X-ray and CT images of 111 pediatric blunt thoracic trauma patients from October 2000 to June 2005. Data recorded age, gender, season, injury mechanism, injury pattern, associated injury, length of hospital stay and cause of death. Result: Of all 111 patients, 68 patients were injured by motor vehicle accidents, 30 were falls, 5 were motorcycle accidents, 3 were sports accidents and 5 were miscellaneous. In thoracic trauma, single injury of lung contusion were 35 patients and 32 patients had multiple thoracic injuries. Hospital stay in school age group were longer than preschool age group. The causes of death were brain injury in 9, respiratory distress in 4, and hypovolemic shock in 2 patients. Emergently transfused and mechanically ventilated patients had higher mortality rates than other patients. Patients required emergency operation and patients with multiple thoracic injuries had higher mortality rates. Conclusion: In this study, patients with combined injury, emergency transfusion, mechanical ventilation, emergency operation, multiple injuries in chest X-ray had higher mortality rates. Therefore in these pediatric blunt thoracic trauma patients, accurate initial diagnosis and proper management is required.

• Journal of Korea Multimedia Society
• /
• v.17 no.7
• /
• pp.818-828
• /
• 2014

After emerging of Microsoft Kinect, the interest in three-dimensional (3D) depth image was significantly increased. Depth image data of an object can be converted to 3D coordinates by simple arithmetic calculation and then can be reconstructed as a 3D model on computer. However, because the surface coordinates can be acquired only from the front area facing Kinect, total solid which has a closed surface cannot be reconstructed. In this paper, 3D registration method for multiple Kinects was suggested, in which surface information from each Kinect was simultaneously collected and registered in real time to build 3D total solid. To unify relative coordinate system used by each Kinect, 3D perspective transform was adopted. Also, to detect control points which are necessary to generate transformation matrix, 3D randomized Hough transform was used. Once transform matrices were generated, real time 3D reconstruction of various objects was possible. To verify the usefulness of suggested method, human arms were 3D reconstructed and the volumes of them were measured by using four Kinects. This volume measuring system was developed to monitor the level of lymphedema of patients after cancer treatment and the measurement difference with medical CT was lower than 5%, expected CT reconstruction error.

• Tuberculosis and Respiratory Diseases
• /
• v.75 no.2
• /
• pp.67-70
• /
• 2013

A 52-year-old man was referred to our clinic for an 11.3 mm nodule in the left lower lobe that was discovered on a chest computed tomography (CT) scan. Eleven small nodules were subsequently found in both lungs. Initially, we performed a transthoracic needle aspiration using CT scan guidance. The pathologic report showed a few clusters of atypical cells that were suspicious for malignancy. The positron emission tomography images revealed multiple lung nodules scattered throughout both lungs. The largest nodule (11.3 mm) in the left lower lobe did not have any discernible fludeoxyglucose uptake. For pathologic confirmation, we consulted a thoracic surgeon to perform the video-assisted thoracoscopic surgery. The final diagnosis was minute pulmonary meningothelial-like nodules (MPMNs). MPMNs are benign in nature, and only a few cases require treatment. However, when clinicians are suspicious of potential malignancy, a pathological correlation is essential, even if the final diagnosis is MPMNs.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.4
• /
• pp.40-50
• /
• 2019

In recent years, it is important to visualize an accurate human body model for the low-end system in the medical imaging field where augmented reality technology and virtual reality technology are used. Decreasing the geometry of a model causes a difference from the original shape and considers the difference as an error. So, the error should be minimized while reducing geometry. In this study, the organ areas of a human body in the tomographic images such as CT or MRI is segmented and 3D geometric model is generated, thereby implementing the reconstruction method of multiple resolution level-of-detail model. In the experiment, a virtual reality platform was constructed to verify the shape of the reconstructed model, targeting the spine area. The 3D human body model and patient information can be verified using the virtual reality platform.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.152-160
• /
• 2011

Purpose: The aim of this study was to evaluate the volumetric change of teeth after preparation for various designs and margin locations through Micro CT analysis (Skyscan 1076: SKYSCAN, Konitch, Belgium). Materials and methods: The 36 artificial teeth were used to determine reduction volume of upper central incisor. According to the restorative design these 36 teeth were divided into 4 groups and according to the marginal location each group was divided into 3 subgroups. The volume of unprepared teeth was obtained by using Micro CT and the volume of prepared teeth was obtained in the same method. The CT scanned images before and after preparation were superimposed. Results: The volume difference was significantly increased as follows: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-way ANOVA and Tukey multiple comparison analyses were used to analyze the data in this study. In each group the volume difference was significantly increased as follows: 1 mm above CEJ < CEJ < 1 mm below CEJ (P<.05). The % volume difference of all ceramic crown and metal ceramic crown was 31 - 48% and that of laminate veneer was 14 - 30%. The volume difference of the traditional laminate veneer was 1/3 of that of metal ceramic crown. The full laminate (1 mm below CEJ) and all ceramic crown (1 mm above CEJ) showed a similar volume difference. Metal ceramic crown showed 13.7% more volume difference than all ceramic crown. Conclusion: There exists the difference in volumetric change according to designs of restoration and margin locations of preparation.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.141-144
• /
• 1997

Femoral neck anteversion is the angle between the neck and the knee axis projected on a plane perpendicular to the longitudinal axis. Conventional methods that use cross-sectional Computed Tomography(CT) images to estimate femoral anteversion have several problems because of the complex 3D structure of the femur. These are the ambiguity of defining the longitudinal axis, the femoral neck axis and condylar line, and the dependence on patient positioning. Especially the femoral neck axis that is known as a major source of error is hard to determine from a single or multiple 2D transverse images. So we developed a new method for measuring femoral anteversion by 3D modeling method. In this method, femoral head is modeled as a sphere. The center of femoral neck is the mid-point of the 2D reconstructed oblique image in the femoral neck part. Then neck axis is a line connecting foregoing two centers. We model the longitude of femur as a cylinder, and the long axis is defined from the fitted cylinder. The knee axis which is tangent to the back of the femoral condyles is easily determined by table-top method. By the definition of femoral anteversion, the femoral anteversion is easily calculated from this model.

• Journal of KIISE:Software and Applications
• /
• v.32 no.5
• /
• pp.357-365
• /
• 2005

We present a B-spline fitting method based on genetic algorithm for the extraction of object contours from the complex image sequence, where objects with similar shape and intensity are adjacent each other. The proposed algorithm solves common malfitting problem of the existing B-spline fitting methods including snakes. Classical snake algorithms have not been successful in such an image sequence due to the difficulty in initialization and existence of multiple extrema. We propose a B-spline fitting method using a genetic algorithm with a new initial population generation and fitting function, that are designed to take advantage of the contour of the previous slice. The test results show that the proposed method extracts contour of individual object successfully from the complex image sequence. We validate the algorithm by false-positive/negative errors and relative amounts of agreements.