• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.203-208
• /
• 2003

The purpose of this study was to evaluate the effect of salivary contamination of teeth on bonding efficacy of self-priming and self-etching DBSs. The materials used were Single Bond(SB, self-priming system, 3M), Unifil Bond(UB, self-etching system, GC), and Scotchbond Multi-Purpose Plus(SM, 3M) as control. Forty five human molars randomly allocated to three groups as dentin bonding systems tested and embedded in epoxy resin. Then the specimens were wet-ground to expose flat buccal enamel surface or flat occlusal dentin surface and cut bucco-lingually to form two halves with slow speed diamond saw. One of them was used under non-contamination, other under contamination with saliva. The bonding procedure was according to the manufacturer's directions and resin composite(Z-100, 3M Dental Products, St. Paul, MN) was built-up on the bonded surface 5mm high. The specimens were ground carefully at the enamel-composite interface with fine finishing round diamond bur to create an hour-glass shape yielding bonded surface areas of $1.5{\pm}0.1\textrm{mm}^2$. The specimens were bonded to the modified microtensile testing apparatus with cyanoacrylate, attached to the universal testing machine and stressed in tension at a CHS of 1mm/min. The tensile force at failure was recorded and converted to a tensile stress(MPa). Mean values and standard deviations of the bond strength are listed in table. One-way ANOVA was used to determine significant difference at the 95% level. The bond strength of SBMP and SB were not affected by salivary contamination, but that of UB was significantly affected by salivary contamination. These results indicate that DBSs with total etch technique seems less likely affected by salivary contamination in bonding procedure.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.307-344
• /
• 2020

Purpose - The purpose of this study is to examine effects of productization and organizational competences on export performance of electromagnetic shielding companies and to analyze moderating effects of overseas market adaptation competences. For this, hypotheses were established by reviewing previous studies and an empirical analysis was conducted for testing. Design/methodology/approach - For this study, a survey was conducted for workers at electromagnetic shielding companies and 250 valid responses out of 300 questionnaires were aquired. A frequency analysis of related variables was conducted. Through an exploratory factor analysis, validity and reliability tests of measuring tools were conducted and a descriptive statistics was analyzed for collected data result and hypotheses testing. Findings - A correlation analysis was conducted to examine relationships among variables. Construct, convergent and discriminant validities were analyzed after a confirmatory factor analysis and a multi-group confirmatory factor analysis. Finally, with a verified model, the hypotheses and the moderating effects were tested. The results are as follows: First, the productization competence has a positive effect on export performance; Second, the organizational competence has a positive effect on export performance. Especially, the organizational competence has more effect on export performance than the productization competence. Although a development of new technology and product is important in terms of performance, along with these competences, a way of acquiring new skills and knowledge, and internalization and adaptation in organizations have more effect on export performance. Third, overseas market adaptation competence moderates effects of organizational and productization competences. Research implications or Originality - It is necessary to seek out opportunities for workers to participate in actively, such as conferences and seminars, to strengthen organizational competence. It is strongly believed that a constant development of high quality product will contribute to export performance. Lastly, in a policy level, supports on SMEs by governments are to be strengthened by providing with finance and human resource.

• 한국인쇄학회지
• /
• 제30권1호
• /
• pp.21-33
• /
• 2012

This research attempts to analyze the effect of printed-saving coupons distributed by major discount store on consumer purchasing intention. Those consumers having used printed-saving coupon in major discount store in Daejeon were selected as respondents. 121 copies were retreated from 150 questionnaires. For data analysis, frequency analysis for respondents' characteristics, Cronbach's alpha for reliability of analysis, and $X^2$ test of multi-regression analysis for testing hypothesis were utilized. The result of analysis shows 1) the way of using coupon is respectively different according to sex, age group, marital status, term of coupon, and the number of using coupon; 2) Attributes of coupon partially influence on purchasing intention of consumers. Only shopping cost cutting is insignificant, while keeping convenience, impulse buying, scheduled purchasing are significant. The most effective variable is scheduled purchasing, keeping convenience, and impulse buying influence on purchasing intension of consumers. Therefore, offering printed-coupon by major discount store is useful tool to induce consumers to planned purchasing.

• 한국운동역학회지
• /
• 제30권3호
• /
• pp.265-273
• /
• 2020

Objective: The aim of this study was to investigate the effect of participation in contact sports on neurocognitive scores, dual-task walking velocity, and cognitive costs in retired athletes. Method: Forty-four retired athletes (mean age = 26.4±5.5 yrs) and thirty-eight controls (mean age = 26.1±4.9 yrs) participated in this study. Neurocognitive score was collected using computerized neurocognitive testing using RehaCom. Gait velocity was collected one single task, four dual-tasks, and two multi-tasks using Optogait. Mann-Whitney U test was performed to compared differences in cognitive scores among groups. A mixed-design two-way ANOVA and Bonferroni posthoc test were used to assess the effect of group and walking tasks for each condition. Results: The auditory divided attention of neurocognitive score of retired athletes was higher than the control group (p < 0.05). No statistical differences were observed in the other neurocognitive scores between groups. The changes in walking velocity and cognitive costs according to the dual-task walking tests differed between the two groups (p < 0.05). Conclusion: Although participation in contact sports did not affect the neurocognitive results of retired athletes, it could be confirmed that the reduction in walking velocity and an increase in cognitive costs during dual-task walking. Rather than observing only neurocognitive scores as a single evaluation item for cognitive evaluation of retired athletes in relation to daily life, the application of the dual-task gait test may provide useful information.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.398-402
• /
• 2022

Vacuum Insulation Panel (VIP) is an high energy efficient insulation system that facilitate slim but high insulation performance, based on based on a porous core material evacuated and encapsulated in a multi-barrier envelope. Although VIP has been on the market for decades now, it wasn't until recently that efforts have been initiated to propose a standard on aging testing. One of the issues regarding VIP is its durability and aging due to pressure and moisture dependent increase of the initial low thermal conductivity with time. It is hard to visually determine at an early stage. Recently, a method of analyzing the damage on the a material surface by applying image processing technology has been widely used. These techniques provide fast and accurate data with a non-destructive way. In this study, the surface VIP images were analyzed using the Harris corner detection algorithm. As a result, 171,333 corner points in the normal packaging were detected, whereas 32,895 of the defective packaging, which were less than the normal packaging. were detected. These results are considered to provide meaningful information for the determination of VIP condition.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제19권4호
• /
• pp.7-18
• /
• 2013

Purpose: The aim of this paper is to reduce the stress and the disturbance occur in selective action of patient. This article will also help us to control spreading and reduce the order and bacteria produced by leprosy disease among the lepers. This will be achieved with the help of several variables and these variables help us on health benefits is 5S (Sort, Straighten, Shine, Standardize, Sustain) i.e. ratio of sectional morphology, lessor 90 degree angles, day light, universal design building and maximum ventilation. The replies from the questionnaire were collected based on varying levels of satisfaction and gloominess on the scale of 1-10. Methods: The multi-layer methodological framework for maximising the healing environment obtained from the observation of schemes and parameters of ANOVA: (Analysis Of Variance between five deciding factors) are. Firstly applied for the calculation of the patient's satisfaction for U.V light from sun on ECOTECT simulation, secondly the number of $90^{\circ}$ angle, along the corridors. Thirdly understanding the ways to represent people's perceptual structures and way finding with Space Syntax software. Fourthly the ratio of depth to height of the building typology and finally interviewing the subjects describing their special experiences based on scale value. The focus of this testing of human subjects was to receive data for the existence of image scheme in way-finding and to identify the mechanisms by which sun light impacts human (lepers) health. Results: AMPVA studies concluded that there is similarity between I and O plan as well as L and H plan whereas U plan was difference among the five selected architectural shapes. Implications: The purpose of this research is to show the effects of the I-type, L-type, C-type, U-type and O-type plan design, and to analyse the morphology for EBD (Evidence-Based Design) healing environment which is a universal design for Munghopir Karachi, in Pakistan.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.185-195
• /
• 2018

최근 산업현장에서 기계의 자동화가 크게 가속화됨에 따라 자동화 기계의 관리 및 유지보수에 대한 중요성이 갈수록 커지고 있다. 자동화 기계에 부착된 센서의 고장이 발생할 경우 기계가 오동작함으로써 공정라인 운용에 막대한 피해가 발생할 수 있다. 이를 막기 위해 센서의 상태를 모니터링하고 고장의 진단 및 분류를 하는 것이 필요하다. 본 논문에서는 센서에서 발생하는 대표적인 고장 유형인 erratic fault, drift fault, hard-over fault, spike fault, stuck fault를 기계학습 알고리즘인 SVM과 CNN을 적용하여 검출하고 분류하였다. SVM의 학습 및 테스트를 위해 데이터 샘플들로부터 시간영역 통계 특징들을 추출하고 최적의 특징을 찾기 위해 유전 알고리즘(genetic algorithm)을 적용하였다. Multi-class를 분류하기 위해 multi-layer SVM을 구성하여 센서 고장을 분류하였다. CNN에 대해서는 데이터 샘플들을 사용하여 학습시키고 성능을 높이기 위해 앙상블 기법을 적용하였다. 시뮬레이션 결과를 통해 유전 알고리즘에 의해 선별된 특징들을 사용한 SVM의 분류 결과는 모든 특징이 사용된 SVM 분류기 보다는 성능이 향상되었으나 전반적으로 CNN의 성능이 SVM보다 우수한 것을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제34권2호
• /
• pp.103-112
• /
• 2009

본 연구에서는 2종의 이원중합 레진시멘트 (RelyX ARC와 Variolink II)를 이용하여 접착제와 레진시멘트의 중합방법 (자가중합과 광중합)이 섬유포스트와 근관 상아질의 결합강도와 접착계면에 미치는 영향을 상호 비교하기 위하여 시행하였다. 단근관을 갖는 발거된 32개의 하악 소구치에 근관을 충전한 후, FRC Postec system의 Reamer로 9 mm 깊이의 포스트 공간을 형성하였다. 레진시멘트의 종류와 중합방법에 따라 4개의 군 (R-SC군, R-LC군, V-SC군, V-LC군)으로 분류하였다. 포스트 공간에 각 군의 접착제를 도포한 후 레진시멘트를 주입하고, No. 3 FRC Postec 포스트를 위치시켜 자가중합 또는 광중합시켰다. 각 군의 치근을 실온의 증류수에 24시간동안 보관한 다음, 저속의 diamond wheel saw를 이용하여 치관부에서 치근단부를 향해 1.5 mm두께로 연속적으로 횡절단하여 1개의 치근에서 3개의 절편을 얻었다. 각 군의 절편 (31개)은 만능시험기에서 push-out 검사를 시행하였고, 각 군의 강도 값은 반복측정 two-way ANOVA와 one-way ANOVA를 이용하여 비교 분석하였다. 각 군의 절편 (3개)은 주사전자현미경하에서 섬유포스트, 레진시멘트 및 치근 상아질 간의 계면을 관찰, 비교하였다. 본 연구의 결과 전 부식 레진시멘트를 이용하여 섬유포스트를 포스트 공간에 합착할 경우, 접착제와 레진시멘트의 중합방법은 근관 상아질의 결합강도에 영향을 주었으며, 광중합보다 자가중합 방법 이 우수한 결합강도와 계면을 나타내었다.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.787-792
• /
• 2022

겨울철 제설염의 사용은 콘크리트의 미세조직을 손상시기게 되고 이는 내구성을 감소시켜 콘크리트의 수명 단축으로 이어진다. 이러한 단점을 개선하기 위해 상변화물질(Phase Change Material, PCM)의 잠열을 콘크리트에 적용함으로써 손상을 완화하고 제설염의 수요를 감소시킬 수 있는 융설 PCM 함침 경량골재(Phase Change Material Impregnated Light Weight Aggregate, PCM-LWA) 콘크리트를 개발하고자 한다. 콘크리트를 제작할 때, PCM을 함침하고 캡슐화한 팽창점토(Expanded Clay)는 일반골재의 50 %를 대체하여 사용되었으며, 열적 성능을 향상시키기 위해 사용된 다중벽 탄소나노튜브(Multi-walled Carbon Nano Tube, MWCNT)는 바인더 중량 대비 0.10 %, 0.15 % 및 0.20 %의 비율로 첨가되었다. PCM-LWA를 적용한 시편들의 압축강도 시험 결과 약 54 %의 강도 감소를 보였지만 MWCNT의 첨가를 통하여 PCM-LWA 콘크리트의 열적 성능을 크게 향상시켰다. 열 사이클링 시험에서 모든 시편은 15℃ ~ -5℃의 온도에서 시험하였다. 주변 온도가 0℃ 미만으로 내려갈 때, 다른 시편들의 내부 온도는 0℃ 미만으로 내려가거나 조금 웃도는 경향을 보였지만, CNT를 0.10 % 첨가한 시편의 내부 온도는 2℃로 유의미한 차이를 보였다. 0.15CNT와 0.20CNT의 경우 CNT의 함유로 인하여 과냉각이 발생하였고 열효율이 떨어지게 되어 시편 내부의 온도가 0℃ 이하로 떨어지는 것을 확인할 수 있었다. 융설 시험에서 열 사이클링 시험의 결과와 유사하게 50PCM-LWA와 0.10CNT는 얼음을 녹이는 데에 가장 뛰어난 성능을 보였지만 시간이 흐름에 따라 열전도율이 높은 0.10CNT 시편이 가장 우수한 성능을 보였다.

• 한국항만경제학회지
• /
• 제28권2호
• /
• pp.195-211
• /
• 2012

세계화의 급속한 진전으로 인해 촉발된 물류활동의 글로벌화에 따라 새롭게 부각되고 있는 분야 중 하나인 해공복합운송은 해상운송의 경제성과 항공운송의 신속성을 통해 수송비용의 절감과 운송시간의 단축이란 목적을 달성하기 위하여 해상운송수단과 항공운송수단을 결합한 국제운송방식이다. 본 연구는 해공복합운송에서 포워더의 만족에 영향을 미치는 실제운송인의 서비스품질구성 요인을 규명하기 위하여 실제운송인을 이용해 본 경험이 있는 현직 포워더를 대상으로SERVPERF 모형을 이용하여 실증분석을 실시하였다. 통계적 검정결과 SERVPERF 모형에서 제시한 유형성, 신뢰성, 대응성, 확신성, 공감성 가운데 신뢰성, 대응성, 확신성, 유형성의 순서로 중요하다는 것이 검증되었으나 공감성은 통계적으로 유의하지 않게 나타났다. 이는 복합운송 산업의 특성에 따라 약속된 서비스를 신뢰할 수 있고, 정확하게 수행 가능한 능력으로 구성되는 요인인 신뢰성의 중요성이 나타난 결과라 할 수 있다. 그리고 기업이 고객에게 제공하고자 하는 개별적인 배려와 관심으로 구성되는 요인인 공감성의 경우 통계적으로 유의하지 않게 나타났는데, 이 또한 산업의 특성을 반영한 결과라고 할 수 있다.