• 설비공학논문집
• /
• 제28권7호
• /
• pp.299-304
• /
• 2016

In recent years, heat source systems which have a principal effect on the performance of buildings are difficult to design optimally as a great number of design factors and constraints in large and complicated buildings need to be considered. On the other hand, it is necessary to design an optimum system combination and operation planning for energy efficiency considering Life Cycle Cost (LCC). This study suggests a multi-level and multi-objective optimization method to minimize both LCC and investment cost using a genetic algorithm targeting an office building which requires a large cooling load. The optimum method uses a two stage process to derive the system combination and the operation schedule by utilizing the input data of cooling and heating load profile and system performance characteristics calculated by dynamic energy simulation. The results were assessed by Pareto analysis and a number of Pareto optimal solutions were determined. Moreover, it was confirmed that the derived operation schedule was useful for operating the heat source systems efficiently against the building energy requirements. Consequently, the proposed optimization method is determined by a valid way if the design process is difficult to optimize.

• 정보처리학회논문지D
• /
• 제17D권4호
• /
• pp.297-310
• /
• 2010

최근에 콘콜릭 테스트이라 불리는 새로운 테스팅 방법이 많은 관심을 받고 있다. 콘콜릭 테스팅은 높은 테스트 커버리지를 달성하기 위해 실제 프로그램 수행과 심볼릭 수행을 결합하여 테스트 데이터를 생성한다. CREST는 콘콜릭 테스팅을 구현한 대표적인 open-source 테스트 도구이다. 그러나 현재 CREST는 입력으로 정수형만 다룬다. 이 논문은 포인터형인 입력이 존재하는 경우에 자동 테스트 데이터 생성을 위한 새로운 규칙을 제안한다. 이 규칙들은 C 프로그램에서 주로 사용되는 다단계 스택 지향 포인터를 효과적으로 처리한다. 또한, 이 논문에서는 제안 된 규칙을 구현한 vCREST라 불리는 도구에 대해 기술하고 C 프로그램에 적용한 결과도 함께 기술한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.169-172
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which feeds foster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.49-52
• /
• 2002

A vision sensor measure range data using laser light source, This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs faster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.584-587
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs laster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8908-8914
• /
• 2015

인터넷이 지속적으로 성장과 발전을 거듭해가고 있는 이면에는 이를 악용하기 위한 다양한 인터넷 공격들이 발생하고 있다. 초기 인터넷 환경에서는 공격자가 역량과시 및 취미 등으로 인터넷 환경을 악용한 공격이 존재하였지만, 금전적인 이득을 목적으로 각종범죄와 연관된 체계적으로 복잡한 공격들이 발생하고 있다. 최근 들어서 바이러스나 윔과 같은 구조가 단순한 소스 멀티타깃(one source multi-target)의 형태가 존재하였지만, 멀티소스 싱글타깃(multi-source single target)의 형태를 갖는 APT(Advanced Persistent Threat, 지속적인 지능형 공격)으로 사용자들로 하여금 막대한 피해를 입히고 있다. 그러므로 본 논문에서는 Agent 및 관리 시스템은 악성코드 감염을 사전에 예방하는 기능을 고도화하여 사용자의 부정행위를 통한 자료유출을 감시할 수 방지 시스템을 설계 및 구현하였다. 성능평가에서는 감사데이터 생성 여부, 무결성 침해 발생 시 탐지 여부, 정상트래픽 오탐 여부, 프로세스 탐지 및 차단 기능 설정, Agent 정책 적용 가능여부에 대해서 기능을 분석하였다.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.868-877
• /
• 2001

This study is to present the typical energy consumption criteria and $CO_2$ exhaust rate in multi-family housing complex by analyzing the energy consumption characteristics. The contents and methodology of this study are as follows; -Examining the documents of maintenance accounts, investigate the cost and its items expended by the annual maintenance in multi-family housing complex. -Survey each consumption of energy sources, maintenance area, location of multi-family housing complex, heating type, and so forth. -After classifying with heating type of multi-family housing complex investigated, Scrutinize the energy consumption by each source. -Analyze the characteristics of energy consumption and $CO_2$ exhaust through multiple regression analyses of maintenance property. -Suggest the typical energy consumption criteria (Mcal/$m^2$.year, Mcal/house.year) and $CO_2$ exhaust rate (kg-c/$m^2$.year, Kg-c/house.year) in multi-family housing complex. the results will come into basic data for estimating energy consumption in multi-family housing complex according to maintenance characteristics.

• 한국음향학회지
• /
• 제24권6호
• /
• pp.325-333
• /
• 2005

본 논문에서는 2004년 동해에서 수행된 MAPLE 실험의 음향계측 자료를 이용한 지음향학적 인자 역산기법을 제시하고 제안된 기법의 검증을 위해 음원의 위치추적 테스트를 수행하였다. 역산을 위한 목적함수는 예인 음원과 고정된 수직선배열로부터 획득된 음향신호를 이용하여 구한 전달손실과 모의된 전달손실과의 상관관계를 평가하도록 정의하였다. 목적함수의 최적화는 광역 최적화 알고리즘인 VFSA (Very Fast Simulated Annealing)를 사용하여 수행하였다. 본 역산기법을 5개의 주파수 토널 성분 데이터에 적용한 후 이를 바탕으로 실험해역의 지음향 모델을 구성하였다. 끝으로 정합장처리를 통해 예인 음원의 위치를 추적하여 역산된 지음향학적 인자들의 타당성을 검토하였다.

• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.215-221
• /
• 2005

We describe the development of a prototype multi-channel electrical impedance tomography (EIT) system. The EIT system can be equipped with either a single-ended current source or a balanced current source. Each current source can inject current between any chosen pair of electrodes. In order to reduce the data acquisition time, we implemented multiple digital voltmeters simultaneously acquiring and demodulating voltage signals. Each voltmeter measures a differential voltage between a fixed pair of adjacent electrodes. All voltmeters are configured in a radially symmetric architecture to optimize the routing of wires and minimize cross-talks. To maximize the signal-to-noise ratio, we implemented techniques such as digital waveform generation, Howland current pump circuit with a generalized impedance converter, digital phase-sensitive demodulation, tri-axial cables with both grounded and driven shields, and others. The performance of the EIT system was evaluated in terms of common-mode rejection ratio, signal-to-noise ratio, and reciprocity error. Future design of a more innovative EIT system including battery operation, miniaturization, and wireless techniques is suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1254-1258
• /
• 2003

One of the major factors that effect sensor performance is analog noise that added in a sensor signal such as voltage. In multi-axis force sensors, error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body. The other error source is noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then proposes a method that can reduce the effect of noise signal to sensor performance. The method is to convert analog voltage signal to digital numbers near sensor body and then to read these digital signals and conduct signal processing in the computer. By this way, we can eliminate a bad effect of electromagnetic wave emitted from computer and of 60 Hz noise emitted from AC source. The proposed method is investigated through experimental demonstration. The experimental results show that it improves S/N ratio of the sensor about 40 times in our experimental setup.