• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.20-26
• /
• 2001

본 논문에서는 터널의 내공변위를 측정하고 측정된 데이터를 효율적으로 관리하는 계측 시스템을 설계하였다. 계측 시스템은 마이크로콘트롤러로와 포텐시오메터형 변위센서로 구성되는 Intelligent Sensing Head와 계측 시스템을 운용하고 측정된 데이터를 관리하는 호스트 컴퓨터로 구성된다. Intelligent Sensing Mead와 호스트 컴퓨터는 다중노드 통신방식에 의하여 연결되며 다중노드 네트워크의 안정된 동작을 위하여 Daisy-Chain 형태로 네트워크를 구성하였고 Fail-Safe 회로를 설계하였으며 Modbus 프로토콜을 사용하여 시스템의 범용성을 높였다. 호스트 컴퓨터는 종합관리 소프트웨어에 의하여 다양한 측정조건을 선택할 수 있으며 데이터베이스를 이용하여 측정된 데이터를 관리한다. 설계된 시스템은 터널에 설치되어 효용성을 확인하였다.

• Journal of Information Processing Systems
• /
• 제15권3호
• /
• pp.632-644
• /
• 2019

The remote monitoring and warning system for dangerous chemicals is designed with the concept of the Cyber-Physical System (CPS) in this paper. The real-time perception, dynamic control, and information service of major hazards chemicals are realized in this CPS system. The CPS system architecture, the physical layer and the applacation layer, are designed in this paper. The terminal node is mainly composed of the field collectors which complete the data acquisition of sensors and video in the physical layers, and the use of application layer makes CPS system safer and more reliable to monitor the hazardous chemicals. The cloud application layer completes the risk identification and the prediction of the major hazard sources. The early intelligent warning of the major dangerous chemicals is realized and the security risk images are given in the cloud application layer. With the CPS technology, the remote network of hazardous chemicals has been completed, and a major hazard monitoring and accident warning online system is formed. Through the experiment of the terminal node, it can be proved that the terminal node can complete the mass data collection and classify. With this experiment it can be obtained the CPS system is safe and effective. In order to verify feasible, the multi-risk warning based on CPS is simulated, and results show that the system solves the problem of hazardous chemicals enterprises safety management.

• 한국음향학회지
• /
• 제25권7호
• /
• pp.333-338
• /
• 2006

수중 방사소음 측정시 낮은 신호대 잡음비를 가지는 신호에 대해 유용한 신호를 얻기 위해서는 잡음제거가 이루어져야 한다. 본 논문은 잡음제거를 수행하기 위하여 Donoho 등에 의해 제안된 Translation-Invariant (TI) 웨이브렛 기반으로 다중 임계치 함수를 적용한 잡음제거 기법을 제안한다. 기존의 웨이브렛 잡음제거 기법은 특이점 부근에서 Pseudo-Gibbs 현상이 발생하는 문제점이 있다 TI 웨이브렛은 신호의 특성 위치를 변화시켜 Pseudo-Gibbs 현상을 제거한다. 그리고 배경잡음 및 외부잡음을 제거하기 위해 각 노드별 변형된 소프트 임계치를 적용한 다중 임계치 함수를 제안한다. 제안 기법의 타당성을 검토하기 위해 모의 시뮬레이션과 해상실험을 수행한 결과 신호대 잡음비가 23dB 및 18dB 이상 개선됨을 확인하였다.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1229-1242
• /
• 2017

In this paper, an interference aware distributed multi-channel MAC (IDMMAC) protocol is proposed for wireless sensor and actor networks (WSANs). The WSAN consists of a huge number of sensors and ample amount of actors. Hence, in the IDMMAC protocol a lightweight channel selection mechanism is proposed to enhance the sensor's lifetime. The IDMMAC protocol divides the beacon interval into two phases (i.e., the ad-hoc traffic indication message (ATIM) window phase and data transmission phase). When a sensor wants to transmit event information to the actor, it negotiates the maximum packet reception ratio (PRR) and the capacity channel in the ATIM window with its 1-hop sensors. The channel negotiation takes place via a control channel. To improve the packet delivery ratio of the IDMMAC protocol, each actor selects a backup cluster head (BCH) from its cluster members. The BCH is elected based on its residual energy and node degree. The BCH selection phase takes place whenever an actor wants to perform actions in the event area or it leaves the cluster to help a neighbor actor. Furthermore, an interference and throughput aware multi-channel MAC protocol is also proposed for actor-actor coordination. An actor selects a minimum interference and maximum throughput channel among the available channels to communicate with the destination actor. The performance of the proposed IDMMAC protocol is analyzed using standard network parameters, such as packet delivery ratio, end-to-end delay, and energy dissipation, in the network. The obtained simulation results indicate that the IDMMAC protocol performs well compared to the existing MAC protocols.

• 융합신호처리학회논문지
• /
• 제14권1호
• /
• pp.45-50
• /
• 2013

센서 네트워크에서 센서는 제한된 에너지 자원을 가지므로, 에너지를 효율적으로 사용하는 것은 중요하다. 대표적인 클러스터링 기법인 LEACH, LEACHC, TEEN 등은 클러스터 헤더가 수집한 정보를 싱크로 전달할 때, 직접 전송을 기본 방법으로 가정한다. 싱크 노드로부터 먼 거리에 클러스터가 위치하는 경우에, 클러스터 헤더는 데이터를 전송하기 위해서 많은 에너지를 소진하고, 이로 인해서 수명이 단축되고, 이 경우에 재클러스터링을 필요로 한다. 클러스터링 과정에서도 센서 노드는 상당한 에너지를 소모한다. 싱크 노드로부터 먼 곳에 위치한 클러스터 헤더의 빠른 에너지 고갈을 억제하기 위해 이웃 클러스터를 통해 싱크로 데이터를 전송하는 방안이 필요하다. 본 연구는 클러스터 센서 네트워크에서 멀티홉 전송 방안으로 토폴로지 행렬을 기반으로 하는 라우팅 기법을 제안한다. 토폴로지 행렬은 클러스터가 구성된 형태를 나타내고, 에너지 효율성을 기준으로 라우팅은 1홉기반 라우팅과 2홉기반 라우팅 기법을 제안한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5744-5764
• /
• 2018

In Wireless Sensor Networks (WSNs) for Internet of Things (IoT) environment, fault tolerance is a most fundamental issue due to strict energy constraint of sensor node. In this paper, a robust energy saving data dissemination protocol for IoT-WSNs is proposed. Minimized energy consumption and dissemination delay time based on signal strength play an important role in our scheme. The representative dissemination protocol SPIN (Sensor Protocols for Information via Negotiation) overcomes overlapped data problem of the classical Flooding scheme. However, SPIN never considers distance between nodes, thus the issue of dissemination energy consumption is becoming more important problem. In order to minimize the energy consumption, the shortest path between sensors should be considered to disseminate the data through the entire IoT-WSNs. SPMS (Shortest Path Mined SPIN) scheme creates routing tables using Bellman Ford method and forwards data through a multi-hop manner to optimize power consumption and delay time. Due to these properties, it is very hard to avoid heavy traffic when routing information is updated. Additionally, a node failure of SPMS would be caused by frequently using some sensors on the shortest path, thus network lifetime might be shortened quickly. In contrast, our scheme is resilient to these failures because it employs energy aware concept. The dissemination delay time of the proposed protocol without a routing table is similar to that of shortest path-based SPMS. In addition, our protocol does not require routing table, which needs a lot of control packets, thus it prevents excessive control message generation. Finally, the proposed scheme outperforms previous schemes in terms of data transmission success ratio, therefore our protocol could be appropriate for IoT-WSNs environment.

• 센서학회지
• /
• 제20권2호
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.504-527
• /
• 2015

Underwater wireless sensor networks (UWSNs) are similar to the terrestrial sensor networks. Nevertheless, there are different characteristics among them such as low battery power, limited bandwidth and high variable propagation delay. One of the common major problems in UWSNs is determining an efficient and reliable routing between the source node and the destination node. Therefore, researchers tend to design efficient protocols with consideration of the different characteristics of underwater communication. Furthermore, many routing protocols have been proposed and these protocols may be classified as location-based and location-free routing protocols. Pressure-based routing protocols are a subcategory of the location-free routing protocols. This paper focuses on reviewing the pressure-based routing protocols that may further be classified into non-void avoidance protocols and void avoidance protocols. Moreover, non-void avoidance protocols have been classified into single factor based and multi factor based routing protocols. Finally, this paper provides a comparison between these protocols based on their features, performance and simulation parameters and the paper concludes with some future works on which further study can be conducted.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1133-1145
• /
• 1996

A method is proposed to predict the deformed shape of the structure subjected to the unknown external loads using the signal from the piezoceramic sensors. Such a shape estimation is based on the linear relationship between the deformation of structure and the signal from sensor, which is calculated using finite element method. The deformed shape is, then calculated using the linear matrix and the signals from the piezoceramic sensors attached to the structures. For the purpose, a structural analysis program is developed using a multi-layerd finite element of 8 nodes with 3 displacement and one voltage degrees of freedom at each node. The multiple layers with the different material properties can be layered within the element. The incompatible mode with the element is found to be crucial to catch the bending behavior accurately. The accuracy of the program is, then, verified by being compared with the experimental results performed by Crawley. The proposed shape estimation method is also verified for the different loads and sensor size. It is shown that the results of shape estimation method using the linear matrix well predicts the deflections compared with those of finite element method.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제1권1호
• /
• pp.7-18
• /
• 2012

데이터베이스 분야에서 다수의 속성을 갖는 데이터의 효율적인 의사 결정을 지원하는 스카이라인 질의에 관한 연구가 활발히 진행되고 있다. 스카이라인 질의란 대량의 데이터에서 필요한 관심 정보를 검색할 때 모든 속성의 데이터를 탐색하지 않고 속성 내에 의미 있는 데이터만 탐색하는 것이다. 이와 같은 스카이라인 질의는 센서 네트워크에서 다양한 환경 및 상황정보를 수집하여 사용자에게 제공하기 위해 유용하게 활용할 수 있다. 그러나 기존의 스카이라인 선출 방식은 다차원 데이터에서 스카이라인 선출시 센서의 수와 차원이 증가함에 따라 비교 계산 횟수가 급격히 증가하며 또한 지배력이 큰 값에 의해 단일 속성으로도 의미 있는 값이 제외될 수 있다. 따라서 본 논문에서는 싱크 노드로 부터 관심(interest) 질의를 하위 노드로 전송할 때 전체 데이터 중 일부 데이터들의 선호도(preference)를 판별할 수 있는 카테고리 기반 소속 함수(CMF : Category Based Member Function)를 함께 전송하여 스카이라인 선출 시 차원의 증가로 발생할 수 있는 비교 계산의 복잡성을 감소시키고 선호도 높은 우선순위 데이터를 처리하는 기법을 제안한다. 제안된 기법의 우수성을 보이기 위해 시뮬레이션을 통한 성능평가를 수행하였으며 그 결과 다차원의 센서 데이터 집합에서 데이터 검출 시 카테고리 기반 소속 함수를 기반으로 한 처리기법에서 시간 복잡도가 감소함을 보였으며 지배력이 큰 스카이라인으로부터 제외된 의미 있는 속성 값을 검출할 수 있었다.