• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2013

This paper deals with the resonant type of a WEC (wave energy converter) and the determination method of its geometric parameters which were obtained to construct the robust and optimal structure, respectively. In detail, the optimization problem is formulated with the constraints composed of the response surfaces which stand for the resonance period(heave, pitch) and the meta center height of the buoy. Use of a signal-to-noise ratio calculated from normalized multi-objective results with the weight factor can help to select the robust design level. In order to get the sample data set, the motion responses of the power buoy were analyzed using the BEM (boundary element method)-based commercial code. Also, the optimization result is compared with a robust design for a feasibility study. Finally, the power efficiency of the WEC with the optimum design variables is estimated as the captured wave ratio resulting from absorbed power which mainly related to PTO (power take off) damping. It could be said that the resultant of the WEC design is the economical optimal design which satisfy the given constraints.

• Interdisciplinary Bio Central
• /
• v.3 no.2
• /
• pp.7.1-7.6
• /
• 2011

Background: Published manuscripts are the main source of biological knowledge. Since the manual examination is almost impossible due to the huge volume of literature data (approximately 19 million abstracts in PubMed), intelligent text mining systems are of great utility for knowledge discovery. However, most of current text mining tools have limited applicability because of i) providing abstract-based search rather than sentence-based search, ii) improper use or lack of ontology terms, iii) the design to be used for specific subjects, or iv) slow response time that hampers web services and real time applications. Results: We introduce an advanced text mining system called PubMine that supports intelligent knowledge discovery based on diverse bio-ontologies. PubMine improves query accuracy and flexibility with advanced search capabilities of fuzzy search, wildcard search, proximity search, range search, and the Boolean combinations. Furthermore, PubMine allows users to extract multi-dimensional relationships between genes, diseases, and chemical compounds by using OLAP (On-Line Analytical Processing) techniques. The HUGO gene symbols and the MeSH ontology for diseases, chemical compounds, and anatomy have been included in the current version of PubMine, which is freely available at http://pubmine.kobic.re.kr. Conclusions: PubMine is a unique bio-text mining system that provides flexible searches and analysis of biological entity relationships. We believe that PubMine would serve as a key bioinformatics utility due to its rapid response to enable web services for community and to the flexibility to accommodate general ontology.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.501-506
• /
• 2001

Computer modeling is essential to evaluate possible design of suspension for a railway vehicles. By creating a simulation, the engineers are able to assess the feasibility of a given design and change the design factors to get a better design. But if one wishes to perform complex analysis on the simulation, such as railway vehicle dynamic, the computational time can become overwhelming. Therefore, many researchers have turned to surrogate modeling. A surrogate model is essentially a regression performed on a data sampling of the simulation. In the most general sense, metamodels(surrogate model) take the form $y(x)=f(x)+{\varepsilon}$, where y(x) is the true simulation output, f(x) is the metamodel output, and $\varepsilon$ is the error between the two. In this paper, a second order polynomial equation is partially used as a metamodel to represent the forty-six dynamic performances for high speed train. The number of factors as design variables of the metamodel is twenty-nine, which are composed the dynamic characteristics of suspension. This metamodel is used to search the optimum values of suspension characteristics which minimize the dynamic responses for high speed train. This optimization is a multi-objective problem which have many design variables. This paper shows that the response surface model which is made through the design of analysis of computer experiments method is very efficient to solve this complex optimization problem.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.148-157
• /
• 2009

When an emergency situation happens in buildings, the top priority is to ensure the occupant from danger as soon as possible. Achieving that goal is a multifaceted and difficult task. However, current evacuation systems have many deficiencies in dealing with the emergency in multi-level structures. The shortage of abilities to continuously update database, predict the future situation and provide the information to users with contextual information is the limit in current systems. Thus, it is very crucial to introduce Evacuation Information System (EIS), which is able to respond quickly to the emergency, and transfer the information to both the administrator and the occupant. The main purpose of this paper is to build EIS on the basis of the indoor Geographical Information System (GIS). When the emergency happens, EIS gives the instruction to Emergency Response Model (ERM) at once. ERM carries out the order and calculates the optimal evacuation routes, then sends the result to EIS. At last, EIS transmits evacuation messages to the occupant who implements evacuation plan. This paper highlights the benefits of EIS in two aspects. One is that EIS can update the data continuously to support evacuation strategy-making. The other is that it can transmit evacuation messages to both the administrator and the occupant.

• Journal of Information Technology Applications and Management
• /
• v.26 no.2
• /
• pp.41-60
• /
• 2019

O2O(Online-to-Offline) commerce, a kind of multi-channel, is used in various industries such as accommodation, food and beverage, transportation, and real estate. The O2O commerce, a channel of integrating online and offline, overcomes the limitations of traditional online commerce, where a customer made a purchase decision without direct experience. Despite this advantage of O2O, if the online-offline channel is not effectively linked, customer's complaints would occur due to service failure. This study, with regard to O2O service failure circumstances, intends to investigate the effect of customer's perceived justice on their emotional response, recovery satisfaction, followed by intention to repurchase. Perceived justice in this study is composed of distributive justice, interactional justice, and procedural justice. Furthermore, this study explores the moderation effect of O2O industry types in the relationship between perceived justice and emotion. An O2O industry type is classified into accommodation, food and beverage, and transportation. A hypothesized research model was empirically tested using a structural equation model. The current study collected 433 questionnaires and the target respondents are customers who have experienced service failure in O2O commerce. The empirical results showed that O2O commerce more effectively conducts service recovery strategy and causes positive customer response by integrating online and offline channel. One of the ultimate purposes of O2O service providers is to reduce the likelihood of service failures and to recover more quickly and efficiently by linking two channels rather than using a single channel. This study suggested that the O2O channel is effective in influencing customer satisfaction and loyalty by inducing customer's positive emotions in recovering service failure.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.541-554
• /
• 1986

This paper presents the results of driving performance analysis of permanent magnet synchronous motor using a microprocessor based control system. The system consists of three phase power transistor inverters, three phase controlled rectifier, three central processing units, and sensors. The three CPUs are, respectively, used to generate PWM control signals for the inverter generating three phase sine wave, to generate the gate control signals for firing the converter, and to supervise other two CPUs. The supervisor is used to compute PI control algtorithm to three phase reference sine wave for the inverter. It is also used to maintain a constant voltage frequency ratio for the converter operating as a constant torque controller. The inverter CPU retrieves precomputed PWM patterns from look up tables because of computation speed limitations found in almost available microprocessors. The converter CPU also retrieves precomputed gate control patterns from another look-up tables. For protecting the control ststem from any damage by extraordinary over currents, the supervisor receives the data from current sensor, CT, and break down the CB to isolate the circuits from source. A resolver has a good performance characteristics of overall speed range, especially on low speed range. Therefor the speed control accuracy is impoved. The microprocessor based PM synchronous motor control system, thus, has many advantages such as constant torque characteristics, improvement of wave, limitation on extraordinary over currents, improvement of speed control accuracy, and fast response speed control using multi-CPU and look-up tables.

• Journal of Information Technology Applications and Management
• /
• v.27 no.3
• /
• pp.37-54
• /
• 2020

In response to the recent decline in the school-age population, universities have made attracting foreign students a major policy task for universities. As a result, the number of foreign students increased rapidly in terms of quantity, but in terms of quality, the risk is inevitable. Accordingly, the government presented education and internationalization competency certification system indicators on the basis of which quality control of students was systematized. Based on the above certification system, this study focused on analyzing the multiple factors that are actually given to the academic adaptation (performance) of the 2200 students who entered a certain university. In addition, factors other than the certification system index were discovered to comprehensively track how they affect the academic performance of students studying abroad. The researcher found the multi-reciprocal model analysis showed that the difference between the learner and the moderator was significant, and whether or not they had the Korean proficiency test (TOPIK) was significant. It also said that it could have a direct impact on Chinese University Entrance Exams (高考) are significant. If a model that is very effective in selecting students is established by each university and used as an indicator through this study, it will serve as a basis for efficient selection of students.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.3
• /
• pp.231-240
• /
• 2009

We explored collective behaviors of indicator species to elucidate the effect of the chemical stress. After the treatments of an insecticide, diazinon, at low concentrations (1.0 and 10.0 ${\mu}g/L$), spatial dispersion patterns of Daphnia magna were checked in a test chamber. The I-index was used to characterize the movement data before (0~1 h) and after (1~2 h) the treatments in laboratory conditions. The slopes of the frequency distribution of I-index in semi-log scale decreased significantly, and the test populations appeared to be more dispersed with a lower degree of aggregation after the treatments. The index was feasible in indicating decrease in the ability of the specimens to keep desirable distances with neighbor individuals under chemical stress and showed a possibility of monitoring presence of toxic chemicals in environment through group behavior measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.18-30
• /
• 2004

In this paper, the calibration problem of an asynchronous CDMA-based antenna array is studied. A new iterative calibration algorithm for antenna array in the presence of frequency offset error is presented. The algorithm is applicable to a non-linear array and does not require a prior knowledge of the (direction of arrivals) DOAs of the signals of any user, and it only requires the code sequence of a reference user. The algorithm is based on the two step procedures, one for estimating both channel and frequency offset and the other for estimating the unknown array gain and phase. Consequently, estimates of the DOAs, the multi-path impulse response of the reference signal sources, and the carrier frequency offset as well as the calibration of antenna array are provided. The performance of the proposed algorithm is investigated by means of computer simulations and is verified by using field data measured through a custom-built W-CDMA test-bed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.48-54
• /
• 2010

S plastic injection molding factory located at Namdong Industrial Complex in Incheon produces plastic parts for semiconductor, vacuum cleaners, office furniture, etc. It produces the parts to customers' order and delivers them directly to customers at due dates using the trucks of freight company. In recent years, it has been suffered from the excessive production cost, high lost sales rate, rigid response to customers' order, and high delivery cost, which affect negatively on its profit. This paper introduces a case study on the profit increase through a newly proposed production and distribution method which applies a make-to-stock and multi-visit delivery strategy at S plastic injection molding factory. The proposed method is evaluated by comparing with the current method with respect to sales profit using the historical data of customer demand. It is confirmed through the computational experiments that the proposed production and distribution method yields almost double increase in profit resulted from the increased production, reduced lost sales, reduced production cost, and reduced delivery cost.