• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.255-263
• /
• 2000

The purpose of this study was to compare the microleakage of the composite resin cores according to surface treatment, dentin bonding agents, and thermocycling. For this study, 120 extracted premolar teeth were used. Flat occlusal surfaces were prepared with diamond disk, and treated with air-abrasion, acid-etching, combination. The composite resin core was built with Z-100 after application of Scotchbond Multi-Purpose and All-Bond 2. Prepared specimens were thermocycled for 2,000 cycles. Specimens were immersed in 1% methylene blue solution for 24hours at $37^{\circ}C$. The microleakage was measured with a inverted metallurgical microscope(BHS313, Olympus, Japan). The following conclusions were drawn from this study: 1. The microleakages in the groups treated with air-abrasion and with acid etching were greater than that of the groups treated with combination method before thermocycling(p<0.05), the microleakages of the groups treated with air-abrasion were greater than that of the groups treated with acid-etching and combination method after thermocycling(p<0.05) 2. There were no significant difference between groups using Scotchbond Multi-Purpose and the groups using All-Bond 2. 3. Thermocycling didn't affect the change of microleakage in all cases.

• 품질경영학회지
• /
• 제45권2호
• /
• pp.191-207
• /
• 2017

Purpose: To develop an interactive version of the conventional process capability-based approach, called 'Interactive Process Capability-Based Approach (IPCA)' in multi-response surface optimization to obtain a satisfactory compromise which incorporates a decision maker(DM)'s preference information precisely. Methods: The proposed IPCA consists of 4 steps. Step 1 is to obtain the estimated process capability indices and initialize the parameters. Step 2 is to maximize the overall process capability index. Step 3 is to evaluate the optimization results. If all the responses are satisfactory, the procedure stops with the most preferred compromise solution. Otherwise, it moves to Step 4. Step 4 is to adjust the preference parameters. The adjustment can be made in two modes: relaxation and tightening. The relaxation is to make the importance of one of the satisfactory responses lower, which is implemented by decreasing its weight. The tightening is to make the importance of one of the unsatisfactory responses higher, which is implemented by increasing its weight. Then, the procedure goes back to Step 2. If there is no response to be adjusted, it stops with the unsatisfactory compromise solution. Results: The proposed IPCA was illustrated through a multi-response surface problem, colloidal gas aphrons problem. The illustration shows that it can generate a satisfactory compromise through an interactive procedure which enables the DM to provide his or her preference information conveniently. Conclusion: The proposed IPCA has two major advantages. One is to obtain a satisfactory compromise which is faithful to the DM preference structure. The other is to make the DM's participation in the interactive procedure easier by using the process capability index in judging satisfaction/unsatisfaction. The process capability index is very familiar with quality practitioners as well as indicates the process performance levels numerically.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권5호
• /
• pp.500-509
• /
• 2013

SCR 머플러 입구와 촉매사이에 설치되는 다공튜브 형상변화에 따른 촉매 삽입형 urea-SCR 머플러 내부유동특성이 해석적으로 조사되었다. 다공튜브는 요소수 분무와 배기가스 혼합물의 공간분포 향상을 통한 $NO_x$ 저감율 증대 및 암모니아 슬립을 방지하기 위해 사용되는 장치이다. 다공튜브 오리피스 면적비 변화가 챔버 내부 유동 및 촉매 전후단의 속도분포에 끼치는 영향이 조사되었으며, 속도분포에 대한 균일도 지수가 최적설계 관점에서 평가되었다. 해석은 상용 유동해석 프로그램을 이용하여 정상상태에서 수행되었으며 요소수 분무와 배기가스 혼합물 대신 상온의 공기가 작동유체로 사용되었다. 해석결과로부터 다공튜브 형상은 머플러 입구와 촉매 전단 사이에 형성된 챔버 내 벌크 선회유동과 촉매 전후단 속도분포의 균일도지수에 큰 영향을 끼침을 알 수 있었다.

• 한국주거학회논문집
• /
• 제26권6호
• /
• pp.1-8
• /
• 2015

This study aims to develop a solution to inter-floor noise complaints by exploring cases of noise complaints between floors and by identifying the demands and needs of the residents. For this purpose, a survey was conducted targeting residents who were sorted into groups depending on their experiences with inter-floor noise. This survey was carried out from June 11, 2014 to June 16, 2014. A total of 100 copies of the questionnaire was distributed to the residents, of which 98 were completed and collected. Data were statistically processed in accordance with SPSS WIN 18.0. The results showed that the leading causes of inter-floor noise complaints were residents' differences in schedules and their inconsideration in behavior. Thus, the solution to this issue is three-fold: first, to take social measures in order to improve communication and understanding between residents so they can be mindful of their noise levels; second, to reinforce noise control regulation; and third, to improve noise reduction design within the building architecture.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.72-82
• /
• 2002

This paper presents the design technology of a Graphic Generator which drives the embedded aircraft display equipments such as HUD(Head-Up Display) and MFD (Multi-Function Display) those provide pilot with the most important mission information. The main issue of this design is how we can implement the real-time embedded graphic generator using a general purpose processor as a substitute for the obsolete the production of specific graphic processor in the military market. So we proposed two kinds of method that one is a software solution so called graphic kernel system, interpreting the display file, controlling the graphic system and pre-processing graphic primitives, the other is a hardware solution so called graphic engine, interpreting passed commands through the graphic kernel system, post-processing the looping calculation taking much of time as implemented by software. We have tested and verified the functionalities and the required performance of Graphic Generator.

• Computers and Concrete
• /
• 제28권5호
• /
• pp.465-478
• /
• 2021

On the premise of ensuring that the static performance of the concrete spreader is met, the first-order natural frequency of the concrete spreader is increased, and the weight of the main beam is reduced. ANSYS is used as an analysis tool to perform modal analysis on the concrete spreader. The natural frequency, mode shape and modal test verification will be obtained to ensure the accuracy of finite element model analysis. Using the ANSYS designxplorer module, the size of the main beam is set, and the response surface model between the parameter variables and the optimization objective is established according to the experimental design points. Screening algorithm and MOGA algorithm are used to multi-optimize the stress, first-order natural frequency and girder weight, and the optimal solution is obtained by comparison. The results of modal analysis are consistent with those of the experiment, and a set of optimal solutions is obtained through the optimization algorithm. The optimal solution obtained can meet the purpose of increasing the first-order natural frequency of the concrete spreader and reducing the weight of the main beam under the premise of ensuring the overall dynamic and static performance of the concrete spreader.

• 대한교통학회지
• /
• 제25권6호
• /
• pp.161-170
• /
• 2007

본 연구에서는 통행배정 모형이 갖는 여러 가지 가정 중 대칭적 통행비용 함수를 갖는 가정을 극복할 수 있는 방법에 대해 살펴보았다. 통행배정 문제에 있어서 대칭적 비용함수 가정이라는 것은 링크의 통행비용은 다른 링크의 교통량에 전혀 영향을 받지 않는 않으면서, 동시에 해당 링크를 통과하는 단하나의 수단에 의해서만 결정된다는 의미이다. 본 연구에서는 이러한 가정을 극복할 수 있는 비대칭 통행배정모형의 특성을 살펴보고, 그 해석 모형에 대해 고찰하였다. 이 때 대표적 비대칭 통행배정 문제인 다수단 통행배정 모형을 중심으로 문제를 정의하여 검토하였다. 대각화(Diagonalized) 알고리즘과 Column Generation에 기반한 heuristic 모형을 다수단 통행배정 모형에 적용하여 그 결과를 분석하였다. 그 과정을 통해 대각화 알고리즘은 초기해의 수단과 수렴기준 수단에 따라 서로다른 해를 갖는 복수의 평형해(Equilibria)특성을 가지고 있음을 확인하였다. 그에 비해 Column Generation에 기반한 heuristic 모형은 Euclidean Norm을 이용한 부분최적화를 통해 복수의 평형해(Equilibria)에 관한 문제점을 개선할 수 있었다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.135-139
• /
• 2008

Through the industrialization since 1960, Korean housing has been developed in a uniform way which is to demolish first and then construct from the scratch. In this process, detached houses and multi-family living detached houses have disappeared without being paid much attention. The detached houses with blood or non-blood related multi-family living situations are typically popular, and worthy enough to explore for professionals right and creative solutions to enhance their values. But many of the people suffered for the expenses and the absence of the idea to enhance their housing themselves. The purpose of this research is to clarify user's demands of developing an adaptable lifespan house and to try to find the solution about the expenses of self improvement. This study used a Small group workshop Panel Method. The workshop consisted of three stage, such as the awareness of their existing residence and lease status, the needs of the housing improvements and the demands of the adaptable house. This study is expected to serve as a fundamental data to promote discussion on reuse of existing residence building and to promote rental detached houses.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.324-333
• /
• 2013

The purpose of this paper is to improve the efficiency of multi-objective topology optimization using a genetic algorithm (GA) with bar-system representation. We proposed a new GA using an elite initial population obtained from a Solid Isotropic Material with Penalization (SIMP) using a weighted sum method. SIMP with a weighted sum method is one of the most established methods using sensitivity analysis. Although the implementation of the SIMP method is straightforward and computationally effective, it may be difficult to find a complete Pareto-optimal set in a multi-objective optimization problem. In this study, to build a more convergent and diverse global Pareto-optimal set and reduce the GA computational cost, some individuals, with similar topology to the local optimum solution obtained from the SIMP using the weighted sum method, were introduced for the initial population of the GA. The proposed method was applied to a structural topology optimization example and the results of the proposed method were compared with those of the traditional method using standard random initialization for the initial population of the GA.

• Architectural research
• /
• 제20권4호
• /
• pp.103-108
• /
• 2018

Wandering behavior is a serious problem among the elderly in nursing homes, yet it has received relatively little study As multi-family houses built before the '80s in South Korea were designed, it did not take account into issues related to parking so that at present parking became a big issue. The Seoul Metropolitan Government tried various ways to sort out the parking problem in multi-family house areas, but inadequate parking and illegal parking are still an ongoing problem. Thus, the purpose of this study was to examine current situation on resident parking only and illegal parking centered on a congested area of multi-family houses in Seoul and present the improvement plan of parking problems through case investigation home and abroad. As the result of the survey, it has been identified that the subject area consists of 506 households in total and 186 parking spaces and also, 100 cars in parking space or parking lot in housing space and 143 in illegal parking. Green parking business and open access parking system were suggested as solution plan for parking problem. Thus, it is expected that through green parking business for 6 houses and the parking lot of elementary schools around, the illegal parking problem would be sorted out.