• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.173-176
• /
• 2004

In this study, the multidisciplinary aerodynamic-structural optimal design is carried out for the supersonic fighter wing. Through the aeroelastic analyses of the various candidate wings, the aerodynamic and structural performances are calculated such as the lift coefficient, the drag coefficient and the deformation of the wing. In general, the supersonic fighter is maneuvered under the various flight conditions and those conditions must be considered all together during the design process. The multi-point design, therefore, is deemed essential. For this purpose, supersonic dash, long cruise range and high angle of attack maneuver are selected as representative design points. Based on the calculated performances of the candidate wings, the response surfaces for the objectives and constraints are generated and the supersonic fighter wing is designed for better aerodynamic performances and less weights than the baseline. At each design point, the single-point design is performed to obtain better performances. Finally, the multi-point design is performed to improve the aerodynamic and structural performances for all design points. The optimization results of the multi-point design are compared with those of the single-point designs and analyzed in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.824-828
• /
• 2000

As production cycle has become more and more shorter, the demand of rapid prototyping technology has increased largely. There are many methods for rapid prototyping technology, such as SLA. SLS, FDM. INK JET, LOM and so on. Of all methods, SLA has been most widely used for fabricating precision parts. But products manufactured by this method have limitation of single color and single material. So the principal purpose of this study is to overcome the limit of single color product. If the internal structure of manufactured product is visible with multi-color characteristic, it is possible to check easily the designed model with reality. In order to give multi-color characteristic to the product, photocurable resin mixed with pigment is used in this study. First, transparency of photocurable resin without pigment is evaluated, and then color characteristic and curing characteristic of the mixture is evaluated changing mixing ratio. Through the basic experiments, it becomes possible to fabricate multi-color 3D prototype without assembly.

• 한국주거학회논문집
• /
• 제24권1호
• /
• pp.11-20
• /
• 2013

The purpose of the study was to develop a classification of management for the qualitative improvement of the management of multi-family housing. The date were analyzed using the Excel program in terms of frequency and, criticality analysis in order to draw items stage by stage. The process of research was as follows: The first process drew classification of types using the content analysis of the documented studies. The second process examined subcategories according to classification of types via interviews of supervisors. Further, the criticality analysis between the two items was examined. Additionally, when this study surveys and analyzes the satisfactions and importance of management on the basis of the classification, it can have an effect on management by reflecting the result. In conclusion, the classification of the management of multi-family housing will make up the improvement scheme of supplement education, certification related management and management regulations on the characteristics of multi-family housing by types of houses in the future.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.555-562
• /
• 2017

The accuracy and integrity of stress data acquired by bridge heath monitoring system is of significant importance for bridge safety assessment. However, the missing and abnormal data are inevitably existed in a realistic monitoring system. This paper presents a data reconstruction approach for bridge heath monitoring based on the wavelet multi-resolution analysis and support vector machine (SVM). The proposed method has been applied for data imputation based on the recorded data by the structural health monitoring (SHM) system instrumented on a prestressed concrete cable-stayed bridge. The effectiveness and accuracy of the proposed wavelet-based SVM prediction method is examined by comparing with the traditional autoregression moving average (ARMA) method and SVM prediction method without wavelet multi-resolution analysis in accordance with the prediction errors. The data reconstruction analysis based on 5-day and 1-day continuous stress history data with obvious preternatural signals is performed to examine the effect of sample size on the accuracy of data reconstruction. The results indicate that the proposed data reconstruction approach based on wavelet multi-resolution analysis and SVM is an effective tool for missing data imputation or preternatural signal replacement, which can serve as a solid foundation for the purpose of accurately evaluating the safety of bridge structures.

• 한국정보통신학회논문지
• /
• 제10권5호
• /
• pp.890-896
• /
• 2006

GPS 측량은 Multi-path 오차가 발생하기 때문에 도심지역이나 숲이 있는 항공사진에서는 지상기준점을 잡기 위해 GPS측량이 어렵다. 본 논문은 소규모 지역에서 3차원 정사사진 구현을 위한 GPS와 EDM의 적용에 관한 연구이다. 삼각점에서 연구대상지역에 대한 기준점을 내린 다음 EDM으로 정밀삼각측량으로 지상기준점을 선정하였다. 그리고 항공사진을 정사투영사진으로 변환하기 위해 획득된 지상기준점을 적용하였다. 그리고 연구대상지역에 대하여 항공정사사진을 이용한 3차원 모델링을 구현하여 향 후 추진될 3차원 GIS 구축을 위한 항공사진의 활용방안에 대해서 연구하였다. Multi-path 오차로 기인하는 GPS수신이 어려운 지점을 EDM을 이용하여 영상에서 균등히 분포된 지상기준점의 획득이 가능하였고 3차원 공간정보 자료구축에서 가장 기본이 되는 소규모 지역에서 항공사진의 활용이 가능할 것으로 판단되었다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.73-78
• /
• 2010

The purpose of this study is to develop the control technology of the welding distortion caused by Auto NG-GTA(Narrow Gap-GTA) welding process at the STS 304 multi-pass butt weldment. Heat input model for Auto NG-GTA welding process was established and verified by measuring temperature change and molten pool shape at the bead-on-plate weldment. With the heat input model developed, the effect of tension load on the welding distortion at the STS 304 multi-pass butt weldment was evaluated using the thermo-elasto-plastic FE analysis. In accordance with FEA results, the angular distortion and transverse shrinkage sharply decreased with an increase in tension load. This result indicated that tensioning method was an effective countermeasure against the welding distortion of the STS 304 multi-pass butt weldment.

• 한국주거학회논문집
• /
• 제19권1호
• /
• pp.39-48
• /
• 2008

The purpose of this study was to examine the characteristics of service facilities, and needs for service facilities using for leisure in multi-family housing properties. The multi-family housing complexes in Seoul were selected in this study. Site visits, analysis of drawing of complex and questionnaire survey were conducted. The statistical techniques used for data analysis included frequencies. The research results were as follows; The studied apartment complexes provided the appropriate and adequate service facilities in accordance to the regulations of multi-family housing. Playground for children, senior center, resting place were found in all the complexes, but the presence of exercise facilities, shared spaces, green spaces, and community parks was somewhat different across the studied complexes. Satisfaction with leisure facilities were different with the apartment complexes. The respondents who had lived older apartment complexes were more likely to increase dissatisfaction, and the reason was attributed to no presence of the leisure facilities they wanted to use. The respondents said that such service facilities using for leisure facilities as playground for children, senior center, community parks, walkways, reading room, and fitness center were highly needed.

• 기술혁신학회지
• /
• 제5권1호
• /
• pp.90-109
• /
• 2002

The national nuclear R&D projects have been implemented for the purpose of supply of nuclear power which was proved to be safety and stability. Evaluating the national nuclear R&D projects has critical importance in nu-clear energy management aspect. This paper employs multi-attribute utility analysis as a basis for obtaining an evaluation index to assess the national nuclear R&D projects using a specific case study of Korea. To structure and quantify basic values for the evaluation, we elicited important attributes, then refined and structured them into a hierarchy. A multi-attribute index is constructed as a multi-attribute utility function, based on value judgments provided by a group of technical experts, policy makers, and faculties. As a result, the objective of attainment of a proposed object is given the highest priority, followed by appropriateness of project and research strategy, utilization of research output, within attribute ranges defined for the attributes. We found that the work and results of this study can provide valuable insights and decision opportunities for virtually all major decision making in evaluation of the national nuclear R&D projects in Korea.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.150-155
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller with 6 blades and guide vane with 11 blades and is performed by changing flow rate from 10 to $26m^3/h$ at the constant 3500rpm. The purpose of this 3-D numerical simulation is not only to confirm how much the effect of three kinds of blade inlet breadth (11mm, 11.5mm, 12mm) of impeller has influence on the performance of vertical multi-stage pump but also to make clear the cause about performance difference at the exit side of impeller and guide vane. The vertical multi-stage pump consisit of the impeller, guide, vane and cylinder. The grid of numerical analysis used to the vertical multi-stage pump is 18,000, 45,000, and 100000 cells in case of the impeller, guide vane, cylinder and total grid is 730,000 cells. The characteristics such as total pressure coefficient, total head, shaft horse power, power efficiency at the exit side of impeller and guide vane, discharge coefficient are represented according to flow rage changing.

• 가정간호학회지
• /
• 제24권2호
• /
• pp.133-141
• /
• 2017

Purpose: This descriptive study aims to analyze the effects of the satisfaction level in the relationship between mother-in-law and daughter-in-law, conflicts between them, acculturative stress and stress coping strategies on elderly depression in multi-cultural families. Methods: The survey was conducted on 89 mothers-in-law, aged 65 or older, in multi-cultural families with a foreign daughter-in-law. Data were collected through structured questionnaires, and then were used to conduct t-test, ANOVA, correlation and multiple regression analyses using the statistical program SPSS 21.0. Results: This study found several factors contributing to depression of mothers-in-law in multi-cultural families. Those factors include living alone without a spouse, poor health, a high level of perceived discrimination and a passive reaction in terms of stress coping strategies. Conclusion: A sense of discrimination perceived by the mothers-in-law having a foreign daughter-in-law implies that the people around them and the community should make efforts to reject distorted perspectives and remove prejudice against foreign daughters-in-law. In addition, the mothers-in-law should receive education and training to use more active and positive stress coping strategies in a stressful situation with the foreign daughter-in-law.