• 한국수자원학회논문집
• /
• 제46권4호
• /
• pp.335-343
• /
• 2013

우리 정부는 법률로써 댐 주변지역 지원을 규정 1990년부터 지원사업을 추진하고 있다. 하지만 댐 주변지역 지역주민의 상대적 박탈감은 여전하며, 때로는 댐을 둘러싼 지역적 갈등이 법정 투쟁으로까지 확대되는 경우도 발생한다. 이와 같이 댐과 관련된 지역적 갈등이 끊이지 않는 것에는 다양한 이유가 존재하나, 댐주변지역지원사업이 만족할 만한 역할을 수행하지 못하고 있는 것 또한 주요한 이유 중 하나로 간주되고 있다. 이에 본 연구는 댐주변지역지원사업과 관련한 고객만족 영향요인 및 요인별 영향 정도를 규명하였다. 그 결과 '댐의 사회적 필요성', '지원절차의 합리성', '지원사업의 합목적성'등의 요인이 댐주변지역 고객만족에 유의적인 영향을 미치는 것으로 분석되었다. 그리고 고객만족에 미치는 요인별 영향의 정도에 있어서는 '지원절차의 합리성' 요인이 가장 큰 것으로 나타났으며, 그 다음으로는 '지원사업의 합목적성', '댐의 사회적 필요성' 순으로 분석되었다. 그러나 댐주변지역지원사업을 지역주민이 직접적으로 수혜를 받았는가의 경험 유무는 고객만족과 통계적으로 유의미한 관련이 있다고는 말할 수 없는 것으로 나타났다. 또한 고객만족에 미치는 영향요인의 구성 항목과 고객만족과의 관계분석에 있어서는 '지역간 형평성'이 가장 큰 영향관계를 보였으며, 다음은 '프로젝트 선정', '주민의견 반영', '지역발전', '투명성' 순으로 나타났다. 하지만 '프로젝트 추진 단계의 적절성'의 통계적 유의성은 없는 것으로 분석되었다.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.103-115
• /
• 1998

Adhesion of composite resin to tooth structure has been of tremendous signgicance in clinical dentistry. Due to the lack of adhesion between composite restorative resins and enamel and dentin, microleakage occurs at the tooth/restoration interface. This may lead to discoloration, secondary caries, marginal breakdown, postoperative sensitivity, and even pulpal pathology. According to extensive use of composite resin, every effort on improving bonding strength and reducing microleakage between a tooth and composite resin has been continued. This study was conducted to determine the difference in microleakage in enamel and dentin treated with air-abrasion, acid etching and combination when restored with composite resin. Class V cavities were prepared on 30 premolars. The specimens were divided into following groups. group 1:air-abrasion+Scotchbond Multi-purpose group 4 :air-abrasion+All-Bond 2 group 2:acid etching+Scotchbond Multi-purpose group 5 :acid etching+All-Bond 2 group 3:combination+Scotchbond Multi-purpose group 6 :combination+All-Bond 2 #combination:air-abrasion + acid etching The specimens were filled with Z-100 after application of Scotchbond Multi-purpose and All-Bond 2. Thermocycling was conducted by alternately dipping the specimens in $5^{\circ}C$ and $55^{\circ}C$ water for 30 seconds 500 times. 1% methylene blue was applied and the specimens were left for 24 hours at $37^{\circ}C$. After washing out the dye, the tooth was sectioned buccolingually along the axis. The sectioned surface was observed with stereoscope for dye penetration. The author has measured the microleakage in teeth prepared with air-abrasion, acid ethching and combination to study the difference in microleakage following different methods of tooth surface treatment and has come to following results. 1. In comparing microleakage between groups, group 1 and 4 showed statistically significant difference from group 2, 3, 5 and 6(p<0.05). There was no significant difference among group 2, 3, 5, 6(p>0.05) nor between group 1 and 4(p>0.05). 2. In comparing microleakage among tooth surface treatment methods, Air-abrasion group showed significantly more microleakage than acid etching group and combination(airabrasion + acid etching) group(p<0.05). Combination(acid etching+air-abrasion)group tended to show lesser microleakage than acid etching group, but this was not statistically significant(p>0.05). 3. In comparing microleakage between bonding agents, there was no statistically significant difference between Scotch bond Multi-purpose and All-Bond 2(p>0.05).

• 전자공학회논문지CI
• /
• 제45권6호
• /
• pp.114-121
• /
• 2008

다중 경로 라우팅 방식은 유선 네트워크에서 주로 연구되었으며 유선 네트워크에서의 엔드 시스템들 사이의 전송률을 증가시키고 load balancing을 유지하는데 효율적이다. 하지만 이런 장점들은 무선 다중 흡 네트워크에서는 그대로 적용되지는 않는다. 그 이유는 무선 네트워크에서 여러 개의 다중 트래픽 경로가 서로 간섭을 줄 수 있기 때문이다. 본 논문에서는 무선 다중 홉 네트워크에서 동작하는 "클러스터 기반의 다중 경로 라우팅"이라고 하는 새로운 다중 경로 라우팅 방식을 제안하였다. 이 라우팅 방식에서는 홉 기반의 라우팅 방식을 확장하여 클러스터에서 클러스터로의 라우팅 방식을 사용한다. 클러스터 기반의 네트워크에서 각 클러스터들은 서로 독립적으로 통신을 진행할 수 있고 또 서로 다른 클러스터들과의 신호간섭을 피할 수 있게 된다. 본 논문에서는 이러한 클러스터의 특징을 이용하여 소스 노드와 목적지 노드 사이에 서로 간섭이 없는 다중경로 방식을 연구하였으며 또한 제안된 방식을 적용할 경우에 엔드 시스템들 사이에 전송률이 증가하는 것을 시뮬레이션을 통하여 알아보았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.215-219
• /
• 2000

In multi-purpose lathe, the design of tilting turret slide system has on important and critical role enhance accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, 3-axis sliding system with tilting turret is modeled by considering the element dividing, material proprties, and boundary conditions using MSC/PATRAN. Mode and frequency analysis of each structures such as saddle, careg, and turret are simulated by MSC/MASTRAN, for the purpose of developing the effective design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.92.5-92
• /
• 2001

The KOMPSAT-1(Korea Multi-Purpose Satellite-1) is the first multi-purpose satellite funded by Korean government for the purpose of remote sensing and scientific data gathering in KOREA. It has successfully achieved its own mission since Dec. 21, 1999. This paper provides an overview of the KOMPSAT-1 missions and addresses the nominal mission planning and operation flow. This paper also describes the routine operational orbit determination and orbit prediction process using GPS navigation solution data. Meanwhile, some problems due to inexperience of the multiple mission operations during LEOP(Launch & Early Orbit Phase) and early normal mission were investigated. Then, resolutions that include the development of new mission planning tool are addressed. The KOMPSAT-1´s missions become more complicated rather than its Initially designed ones. In order to accomplish ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.217-219
• /
• 1998

Korea Water Resources Corporation (KOWACO) annually supplies about 2 billion Kwh and 7.3 billion $m^3$ with its 10 multi purpose dams and 20 water supply offices. For the proper control and management of the above utilities, sequential control equipment and SCADA/DCS have been operated and maintained. In this paper, 8 control system evaluations for hydropower dam, water supply, electric power and subway projects during 1984-1997 were reviewed and analyzed. The systematic evaluation method has been established in the points of the purpose, method, procedure, evaluation team, evaluation criteria, total evaluation table and the contents of final recommendation report. With keeping in mind the essential points, it is expected for the more effective and fair evaluation of bids.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.60-70
• /
• 2001

In multi-purpose lathe, the design of tilting turret slide system has an important and critical role to enhance accuracy of the machining process. Tilting turret unit is traveled by 3-axis slide systems. There is a need to design this part very carefully. In this research, 3-axis sliding system with tilting turret unit is modeled by considering the element dividing, material proprties, and boundary conditions with PATRAN. Normal mode and frequency analysis of each structures such as saddle, cared, and turret are simulated by NASTRAN, for the purpose of developing the effective design. The results of mode analysis and frequency analysis are visualized with PATRAN, and the design method which can solve the resornance problem by eigenvalues and eigenvectors of each axis is developed as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.474-481
• /
• 2000

recently out-door stadium have been built not only for athletic sports but also various events and huge concerts and 50% of the roof of multi-purpose stadium have been covered by dome and the tendency of this kind of building type gradually increase, in spite of this kind of building tendency, the appearance of acoustic obstacle is serious and have little solution of this problem in acoustic-prevent building field. The purpose of this study is for analysis of acoustic Properties(SPL, RT60, RASTI) and answering of characteristics of echo through acoustic computer simulation in Seoul world cup stadium in the first instance.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.609-609
• /
• 2003

I. Objectives The purpose of this study was to evaluate the effect of adhesive property on microtensile bond strength and to determine the failure mode. II. Materials and Methods Flat occlusal dentin surfaces were prepared using low-speed diamond saw. The dentin was etched with 37% phosphoric acid. The following adhesives were applied to the etched dentin according to manufacturer's directions；Scotchbond Multi-Purpose in group 1, Primer＆Bond NT in group 2, Scotchbond Multi-Purpose followed by Tetric-flow in group 3. After adhesive application, a cylinder of resin-based composite was built up the occlusal surface.(omitted)

• 센서학회지
• /
• 제32권3호
• /
• pp.180-186
• /
• 2023

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.