• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.173-176
• /
• 2004

In this study, the multidisciplinary aerodynamic-structural optimal design is carried out for the supersonic fighter wing. Through the aeroelastic analyses of the various candidate wings, the aerodynamic and structural performances are calculated such as the lift coefficient, the drag coefficient and the deformation of the wing. In general, the supersonic fighter is maneuvered under the various flight conditions and those conditions must be considered all together during the design process. The multi-point design, therefore, is deemed essential. For this purpose, supersonic dash, long cruise range and high angle of attack maneuver are selected as representative design points. Based on the calculated performances of the candidate wings, the response surfaces for the objectives and constraints are generated and the supersonic fighter wing is designed for better aerodynamic performances and less weights than the baseline. At each design point, the single-point design is performed to obtain better performances. Finally, the multi-point design is performed to improve the aerodynamic and structural performances for all design points. The optimization results of the multi-point design are compared with those of the single-point designs and analyzed in detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.824-828
• /
• 2000

As production cycle has become more and more shorter, the demand of rapid prototyping technology has increased largely. There are many methods for rapid prototyping technology, such as SLA. SLS, FDM. INK JET, LOM and so on. Of all methods, SLA has been most widely used for fabricating precision parts. But products manufactured by this method have limitation of single color and single material. So the principal purpose of this study is to overcome the limit of single color product. If the internal structure of manufactured product is visible with multi-color characteristic, it is possible to check easily the designed model with reality. In order to give multi-color characteristic to the product, photocurable resin mixed with pigment is used in this study. First, transparency of photocurable resin without pigment is evaluated, and then color characteristic and curing characteristic of the mixture is evaluated changing mixing ratio. Through the basic experiments, it becomes possible to fabricate multi-color 3D prototype without assembly.

• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2013

The purpose of the study was to develop a classification of management for the qualitative improvement of the management of multi-family housing. The date were analyzed using the Excel program in terms of frequency and, criticality analysis in order to draw items stage by stage. The process of research was as follows: The first process drew classification of types using the content analysis of the documented studies. The second process examined subcategories according to classification of types via interviews of supervisors. Further, the criticality analysis between the two items was examined. Additionally, when this study surveys and analyzes the satisfactions and importance of management on the basis of the classification, it can have an effect on management by reflecting the result. In conclusion, the classification of the management of multi-family housing will make up the improvement scheme of supplement education, certification related management and management regulations on the characteristics of multi-family housing by types of houses in the future.

• Computers and Concrete
• /
• v.20 no.5
• /
• pp.555-562
• /
• 2017

The accuracy and integrity of stress data acquired by bridge heath monitoring system is of significant importance for bridge safety assessment. However, the missing and abnormal data are inevitably existed in a realistic monitoring system. This paper presents a data reconstruction approach for bridge heath monitoring based on the wavelet multi-resolution analysis and support vector machine (SVM). The proposed method has been applied for data imputation based on the recorded data by the structural health monitoring (SHM) system instrumented on a prestressed concrete cable-stayed bridge. The effectiveness and accuracy of the proposed wavelet-based SVM prediction method is examined by comparing with the traditional autoregression moving average (ARMA) method and SVM prediction method without wavelet multi-resolution analysis in accordance with the prediction errors. The data reconstruction analysis based on 5-day and 1-day continuous stress history data with obvious preternatural signals is performed to examine the effect of sample size on the accuracy of data reconstruction. The results indicate that the proposed data reconstruction approach based on wavelet multi-resolution analysis and SVM is an effective tool for missing data imputation or preternatural signal replacement, which can serve as a solid foundation for the purpose of accurately evaluating the safety of bridge structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.890-896
• /
• 2006

It's very difficult to acquire the accurate GCP(Ground Control Point) in the urban center and forest aerial photo because of occurring of irregular multi-path error. The purpose of this study is to apply the CPS and the EDM system for 3D orthophoto in the small areas. GCPs surveyed by accuracy triangulation from EDM after from triangulation points to a fiducial point at study area used to GPS. And I have a comment on how to use areal orthophoto for future 3D-GIS after 3D-Modelling using areal orthophoto. As the results, EDM surveying could resolve multi-path error according to GPS surveying and It is possible for using aerial orthophoto on the basis of the 3D-GIS database.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.73-78
• /
• 2010

The purpose of this study is to develop the control technology of the welding distortion caused by Auto NG-GTA(Narrow Gap-GTA) welding process at the STS 304 multi-pass butt weldment. Heat input model for Auto NG-GTA welding process was established and verified by measuring temperature change and molten pool shape at the bead-on-plate weldment. With the heat input model developed, the effect of tension load on the welding distortion at the STS 304 multi-pass butt weldment was evaluated using the thermo-elasto-plastic FE analysis. In accordance with FEA results, the angular distortion and transverse shrinkage sharply decreased with an increase in tension load. This result indicated that tensioning method was an effective countermeasure against the welding distortion of the STS 304 multi-pass butt weldment.

• Journal of the Korean housing association
• /
• v.19 no.1
• /
• pp.39-48
• /
• 2008

The purpose of this study was to examine the characteristics of service facilities, and needs for service facilities using for leisure in multi-family housing properties. The multi-family housing complexes in Seoul were selected in this study. Site visits, analysis of drawing of complex and questionnaire survey were conducted. The statistical techniques used for data analysis included frequencies. The research results were as follows; The studied apartment complexes provided the appropriate and adequate service facilities in accordance to the regulations of multi-family housing. Playground for children, senior center, resting place were found in all the complexes, but the presence of exercise facilities, shared spaces, green spaces, and community parks was somewhat different across the studied complexes. Satisfaction with leisure facilities were different with the apartment complexes. The respondents who had lived older apartment complexes were more likely to increase dissatisfaction, and the reason was attributed to no presence of the leisure facilities they wanted to use. The respondents said that such service facilities using for leisure facilities as playground for children, senior center, community parks, walkways, reading room, and fitness center were highly needed.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.1
• /
• pp.90-109
• /
• 2002

The national nuclear R&D projects have been implemented for the purpose of supply of nuclear power which was proved to be safety and stability. Evaluating the national nuclear R&D projects has critical importance in nu-clear energy management aspect. This paper employs multi-attribute utility analysis as a basis for obtaining an evaluation index to assess the national nuclear R&D projects using a specific case study of Korea. To structure and quantify basic values for the evaluation, we elicited important attributes, then refined and structured them into a hierarchy. A multi-attribute index is constructed as a multi-attribute utility function, based on value judgments provided by a group of technical experts, policy makers, and faculties. As a result, the objective of attainment of a proposed object is given the highest priority, followed by appropriateness of project and research strategy, utilization of research output, within attribute ranges defined for the attributes. We found that the work and results of this study can provide valuable insights and decision opportunities for virtually all major decision making in evaluation of the national nuclear R&D projects in Korea.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.150-155
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pump including impeller with 6 blades and guide vane with 11 blades and is performed by changing flow rate from 10 to $26m^3/h$ at the constant 3500rpm. The purpose of this 3-D numerical simulation is not only to confirm how much the effect of three kinds of blade inlet breadth (11mm, 11.5mm, 12mm) of impeller has influence on the performance of vertical multi-stage pump but also to make clear the cause about performance difference at the exit side of impeller and guide vane. The vertical multi-stage pump consisit of the impeller, guide, vane and cylinder. The grid of numerical analysis used to the vertical multi-stage pump is 18,000, 45,000, and 100000 cells in case of the impeller, guide vane, cylinder and total grid is 730,000 cells. The characteristics such as total pressure coefficient, total head, shaft horse power, power efficiency at the exit side of impeller and guide vane, discharge coefficient are represented according to flow rage changing.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.24 no.2
• /
• pp.133-141
• /
• 2017

Purpose: This descriptive study aims to analyze the effects of the satisfaction level in the relationship between mother-in-law and daughter-in-law, conflicts between them, acculturative stress and stress coping strategies on elderly depression in multi-cultural families. Methods: The survey was conducted on 89 mothers-in-law, aged 65 or older, in multi-cultural families with a foreign daughter-in-law. Data were collected through structured questionnaires, and then were used to conduct t-test, ANOVA, correlation and multiple regression analyses using the statistical program SPSS 21.0. Results: This study found several factors contributing to depression of mothers-in-law in multi-cultural families. Those factors include living alone without a spouse, poor health, a high level of perceived discrimination and a passive reaction in terms of stress coping strategies. Conclusion: A sense of discrimination perceived by the mothers-in-law having a foreign daughter-in-law implies that the people around them and the community should make efforts to reject distorted perspectives and remove prejudice against foreign daughters-in-law. In addition, the mothers-in-law should receive education and training to use more active and positive stress coping strategies in a stressful situation with the foreign daughter-in-law.