• 한국해양공학회지
• /
• 제27권5호
• /
• pp.28-35
• /
• 2013

In this paper, a research on the composition of the nesting algorithm fitness function is carried out by performing various numerical experiments to inspect how it affects the scrap efficiency, allocation characteristics, and time consumption, targeting the nesting results of ship parts. This paper specifically concentrates on a method to minimize the scrap ratio and efficiently use the well-defined remnants of a raw plate after the nesting process for the remnant nesting. Therefore, experiments for various ship parts are carried out with the weighting factor method, one of the multi-objective optimum design methods. Using various weighting factor sets, the nesting results are evaluated in accordance with the above purposes and compared with each set for each ship part groups. Consequently, it is suggested that the nesting algorithm fitness function should be constructed differently depending on the characteristics of the parts and the needs of the users.

• Journal of Welding and Joining
• /
• 제34권4호
• /
• pp.23-27
• /
• 2016

A 3D printed metal part and thermal plastic polymer part were joined by direct laser irradiation. The 3D metal part was fabricated by using DED(Direct Energy Deposition) with STS316 material. The experiment was carried out through no patterned metal surface, 3D metal printed surface and micro laser patterned surface. The most secure joining quality was obtained at the laser micro patterned surface specimen and the counterparts of polymers were PLA and PE based thermo plastics. The applied laser power was 350Watt and the distance of patterns was maintained at $150{\mu}m$. The laser line width was optimized at $450{\mu}m$ and the laser micro pattern depth was $180{\mu}m$ for the best joining quality. Based on the result analysis, the possibility of laser material joining for metal to polymer was proposed and multi-material joining will be possible in 3D laser direct material fabrication.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.367-383
• /
• 2023

The present paper examines the natural frequency responses of the bi-directional (n_x-n_y, n_y-n_z and n_z-n_x) and multidirectional (n_x-n_y-n_z) functionally graded (FG) plate and curved structures with and without porosity. The even and uneven kind of porosity pattern are considered to observe the influence of porosity type and porosity index. The numerical findings have been obtained using a higher order shear deformation theory (HSDT) based isometric finite element (FE) approach generated in a MATLAB platform. According to the convergence and validation investigation, the proposed HSDT based FE model is adequate to predict free vibrational responses of multidirectional porous FG plates and curved structures. Further a parametric analysis is carried out by taking various design parameters into account. The free vibrational behavior of bidirectional (2D) and multidirectional (3D) perfect-imperfect FGM structure is examined against various power law index, support conditions, aspect, and thickness ratio, and for the curvature of curved structures. The results indicate that the maximum non-dimensional fundamental frequency (NFF) value is observed in perfect FGM plates and curved structures compared to porous FGM plates and curved structures and it is maximum for FGM plates and curved structures with uneven kind of porosity than even porosity.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.23-31
• /
• 2019

현대의 위성들의 설계요구조건은 운용되는 목적에 따라 다양해진다. 기존 중/대형 위성과는 달리 저궤도에서 운용되는 소형위성의 경우 군사적인 목적을 나타내기도 한다. 그렇기 때문에 고해상도의 사진 및 영상 수요가 증가하며 다표적 관측이 중요하게 된다. 이에 다표적 관측을 하기 위해서 위성의 기동성은 중요한 설계변수이다. 기동성이 증가하기 위해서 소형화가 되면 전체 질량관성모멘트가 감소하기 때문에 위성의 강성을 높여야한다. 본체에 비해서 강성이 낮은 태양전지판의 경우 진동이 발생하기 때문에 영상획득에 큰 영향을 미친다. 이러한 진동특성을 확인하기 위하여 본 연구에서는 위성을 축소모델로 제작하여 자세기동을 모사하기 위한 실험 치구를 도입하였고, 위성의 강성을 모사하기 위한 모사장치를 제시하였다. 또한 실험방식은 스텝모터를 이용하여 와이어의 감는 길이에 따라 위성의 기동각을 모사하였으며, 기동실험 시 발생되는 위성의 본체 및 태양전지판에 대하여 진동특성을 실험적으로 검증하고자 한다.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.369-375
• /
• 2019

This paper presents a new method on how to calculate the thrust forces acting on an auto-leveling device in headlamps for passenger vehicles. The leveling device is used to lower the angle of lights when a load in the trunk of the vehicle lifts it. In the process of the headlamp design, it is imperative to predict the external forces so that the designers can decide whether to proceed or not. The device is composed of three pivot joints with no reaction moment, a plate that holds the lamp, and a leveling motor that changes rotation to linear motion. In this study, force balance, moment balance, and geometric compatibility are applied to the leveling device system so that a nonlinear system of equations can be derived; the multi-dimensional Newton-Raphson algorithm is then used to solve these. A sensitivity analysis is carried out to verify which design variables affect the system the most: the mass of the lamp and the height between the pivot and leveling device affect the thrust forces the most. Then, considering the friction forces between the moving parts, the hysteresis of the forces are derived. An experimental apparatus, designed and developed in this study, is used to verify the exactness of the derived equations. The results from experiments coincide well with the calculated results. The friction hysteresis, in particular, proves this upon analysis.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.87-94
• /
• 2006

교량의 설계 및 시공에 있어 적절한 설계하중을 산정하기 위해 차량의 하중을 측정하는 것은 매우 중요하다. 본 논문에서는 이동하중에 대해 다축의 모멘트 영향선을 이용하여 시간에 따라 하중을 식별하는 알고리듬을 제안하였다. 또한 2개 이상의 하중을 식별하는 경우, 시간에 따른 하중 식별 결과가 심한 진동을 하기 때문에 밀도추정함수를 통해 최종 식별하중을 구하는 방법을 제안하였다. 단경간 판형교에 대한 수치예제를 수행하여 제안한 알고리듬 및 방법들을 검증하였다. 수치예제에서는 계측오차와 속도오차에 대한 오차분석을 수행하였다. 또한 제안된 알고리듬을 6m 길이의 강재 모형교량을 이용한 실내실험을 통해 재검증하였다. 속도와 하중의 종류에 따라 하중식별 능력이 달랐으나 개발한 알고리듬이 최대 10% 수준의 오차 내에서 하중을 식별할 수 있음을 확인하였다.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.338-347
• /
• 2005

Horizontal-Flow Roughing Filtration (HRF) is one of altemative pretreatment methods e.g. prior to Slow Sand Filtration (SSF). However, some of its limitations are that the effluent quality drops drastically at higher turbidity (>200 NTU) and at higher filtration rate (>1 m/h). To overcome these drawbacks, we suggested Direct Horizontal-Flow Roughing Filtration (DHRF), which is a modified system of Horizontal-Flow Roughing (HRF) by addition of low dose of coagulant prior to filtration. In this study to optimize the DHRF configuration, a conceptual and mathematical model for the coarse compartment has been developed in analogy with multi-plate settlers. Data from simple column settling test can be used in the model to predict the filter performance. Furthermore, the model developed herein has been validated by successive experiments carried out. The conventional column settling test has been found to be an handy and useful to predict the performance of DHRF for different raw water characteristics (e.g. coagulated or uncoagulated water, different presence of organic matter, etc.) and different inital process conditions (e.g. coagulant dose, mixing time and intensity, etc.). An optimum filter design for the coarse compartment (grain size 20mm) has been found to be of 3 m/h filtration rate with filter length of 4-4.5 m.

• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.10-15
• /
• 2023

덕티드팬의 동력절환장치인 클러치의 마찰판 사양을 최적설계하고 그 결과를 분석하였다. 클러치는 기계적 잠금장치의 적용 여부에 따라 2가지 방식으로 구분하고 각자의 설계 조건 하에 최적화 되었다. 클러치를 최적 설계하기 위한 인자로 전달토크 용량, 마찰재 면압, 마찰면의 온도 및 드래그 토크 등을 계산하였고, 클러치 분리판의 부피와 드래그 토크의 최소화를 최적설계의 목적함수로 활용하였다. 기계적 잠금장치가 포함되지 않은 Type 1의 경우 덕티드팬의 피치각에 상관없이 클러치의 작동이 가능하지만, 기계적 잠금장치가 포함된 Type 2에 비해 마찰면의 외경이 약 2배정도 증가하였고, 부피는 약 5~7배, 드래그 토크는 약 7~12배 정도 증가하였다.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.441-456
• /
• 2024

This paper aims to develop Machine Learning (ML) algorithms to predict the buckling resistance of cold-formed steel (CFS) channels with restrained flanges, widely used in typical CFS sheathed wall panels, and provide practical design tools for engineers. The effects of cross-sectional restraints were first evaluated on the elastic buckling behaviour of CFS channels subjected to pure axial compressive load or bending moment. Feedforward multi-layer Artificial Neural Networks (ANNs) were then trained on different datasets comprising CFS channels with various dimensions and properties, plate thicknesses, and restraining conditions on one or two flanges, while the elastic distortional buckling resistance of the elements were determined according to the Finite Strip Method (FSM). To develop less biased networks and ensure that every observation from the original dataset has the chance of appearing in the training and test set, a K-fold cross-validation technique was implemented. In addition, the hyperparameters of the ANNs were tuned using a grid search technique to provide ANNs with optimum performances. The results demonstrated that the trained ANNs were able to predict the elastic distortional buckling resistance of CFS flange-restrained elements with an average accuracy of 99% in terms of coefficient of determination. The developed models were then used to propose a simple ANN-based design formula for the prediction of the elastic distortional buckling stress of CFS flange-restrained elements. Finally, the proposed formula was further evaluated on a separate set of unseen data to ensure its accuracy for practical applications.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.131-140
• /
• 2022

레일장대화는 무도상교량의 소음, 진동, 충격 등의 문제점을 해결할 수 있는 경제적인 방안 중 하나이며, 최근 연동식 침목고정장치를 이용한 SSF 공법이 개발된 바 있다. 이 연구에서는 연동식 침목고정장치 적용 시 레일 높이 조정 및 열차 통과 시의 충격 흡수를 목적으로 교량침목 하부에 삽입되는 침목패드의 최적 연직강성을 결정하는 과정을 제시하였다. 침목패드의 최적 연직강성 결정을 위하여 관련 기존 기준을 검토하였으며, 유연다물체동적해석을 통하여 침목패드의 연직강성 변화에 따른 주행안전성, 승차감 및 궤도의 안전성에 대한 지표들과 교량 응답 변화를 검토하였다. 유연다물체동적해석은 상용프로그램인 ABAQUS와 VI-Rail을 이용하여 수행하였다. 수치해석은 30m 상로판형교에 대한 교량모델을 이용하여 수행하였으며, 침목패드의 연직강성이 7.5kN/mm ~ 240kN/mm로 변화할 때 ITX 새마을, KTX 및 화차 통과 시의 응답을 산정하였다. 수치해석에 적용된 궤도구성품 조건에서 침목패드의 최적 강성은 100kN/mm로 산정되었다.