• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.305-313
• /
• 2013

As an FMT (Filtered Multi-Tone) transmission method of Wideband VHF communication system specified by the ETS (European Telecommunications Standards) EN 300 392-2, this paper introduces three existing realization methods, i.e., the direct filtering method using different band SRRC (Square-Root Raised Cosine) filters for each subcarrier, the PPN-DFT method using the IDFT-PPN (Poly-Phase Network) and PPN-DFT at the transmitter and receiver, respectively, and the Extended DFT method. Then, it proposes the extended IDFT-SDFT (Sliding Discrete Fourier Transform) that computes the DFT values only for interested subcarriers every sample time, and shows that it has an advantage of blind symbol timing (using no training symbol) individually for each user signal (independently of other users' signals) in the multi-user environment where the subcarriers are assigned in contiguous or interleaved blocks to each user and each user signal possibly experiences different channels.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.8
• /
• pp.14-25
• /
• 2002

In this paper, we propose a modified AFC algorithm which is suitable for the implementation of WCDMA reverse link receiver modem. To reduce the complexity, the modified CP-FDD algorithm named 'Normalized CP-FDD' is applied to the AFC loop. The proposed FDD algorithm overcomes the conventional CP-FDD's sensitivity to the variance of input signal amplitude and increases the linear range of S -curve. Therefore, offset frequency estimation using the proposed scheme can be more stable than the conventional method. Unlike IS-95, since pilot symbol in WCDMA is not transmitted continuously, we introduce a moving average filter at the FDD input to increase the number of cross-product. So, tracking speed and stability are improved. For more rapid frequency acquisition and tracking, we adopt a multi-stage tracking mode. Using NCO having ROM table structure, the frequency offset is compensated. We applied the proposed algorithm in the implementation of WCDMA base station modem successfully.

• Archives of design research
• /
• no.16
• /
• pp.237-252
• /
• 1996

Study of new materials, which has been going on in many fields of modem art since the beginning of this century, has cintributed much to the development of modem art. In this regard, it is noteworthy that many in the field of fiber art have experimented with non-traditional, indusrial materials with some notable success. Industrial materials represent the world of thechnology we live in and help us form the kind of view on art that is reflective of the present age and its social milieu. Industrial materials, when used as media for art, also present us with new concepts and possibilities for artistic expression. In fiber art, the use of industrial materials has greatly expanded the very idea of 'fiber', effectively ferring the imagination of fiber aetists to experiment with diverse materials and new mathodology. Overcoming the traditional constraints of technique-orienthd their discipline, fiber artists began to pay more attention to matiere or the material jtself and the infinite variety of surface, color and texture that it promises. And informed by this newly discovered aesthetice of the material. fiber artists began in eamest to expand the area of their artistic expression, producing multi-dimensional works, conquering space and experimentiong with hugc environmantal works.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.285-285
• /
• 2009

Due to a development of a modem technology as Power Line Communication(PLC) over 200 Mbps, the high-speed multi-media data trasmission could be currently possible. In This paper we develop a high quality media transmitter-receiver based on merging the HomePlug AV, which is 200 Mbps class PLC technology and HDMI Interface technology. Smart Live 6 software were used for the assessment of audio property. As the result of measurement of the HD class images by capturing from the receiver of the PLC, the quality of images couldn't be confirm any deterioration, which has compared with original reflections. In case of audio part as the result of confirmation of the Phase, Magnitude, it has been confirmed that over 90% of nomal transmition and receiving of acoustic signal.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.69-72
• /
• 2000

This paper shows the more improved design of MRI receiver compared to conventional one based on Elscint Spectrometer. At first, the low-cost ADC is 16 bits, 3MHz sampling A/D converter Comparing to conventional one with signal bits of 14 bits, this device with those of 16 bits helps getting Improved the image resolution improved. If frequency is designed centering around 7.6 MHz to be satisfied in 10 MHz of maximum input bandwidth of ADC. For 1st demodulation, fixed IF is used for the purpose of the implementing multi nuclei system. Control parts & partial digital parts are integrated on one chip(FPGA). In DDC(Digital Down Converter), we got required bandwidth of LPF by controlling its decimation rate. With above considerations, we designed optimal receiver for high resolution imaging to be implemented through PC interface & experimental test of receiver of MRI after receiver's fabrication.

• International Journal of Costume and Fashion
• /
• v.11 no.1
• /
• pp.53-61
• /
• 2011

This study examines the prati fashion style. prati fashion refers to a practical fashion, the most sought-after trend and newest fashion concept. This trend emerged as a response to the trio of minimalism, the recent economic downturn and the modern life style, and has led to powerful fashion lines and items. Therefore, this study is to understand and analyze the prati fashion style, with its focus on the 2010 modern fashion collection that embodied functional, economic, and minimal styles. First, the functional style realized by new materials provides comfort and allows multi-style changes. Second, the minimal style adds detailed changes to minimal silhouettes. Finally the economic style means easy to wear and easy to match items at affordable prices. The analyses stated above found that the prati fashion brought about a new paradigm to society, and influenced social, cultural and economic aspects of our daily life. It also helped find solutions to economic problems of this era. Drawing global attention, the prati fashion has functional, design and economic values, and thereby influences the shift of market paradigm.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.159-162
• /
• 2002

본 논문에서는 대역확산 방식으로 제안되고 있는 CDMA 시스템의 송수신 모뎀을 FPGA를 이용하여 설계 및 검증을 수행하였다. 송신기에서는 Walsh code(N=16), PN(7 stage=127chip)code를 데이터에 곱하여서 송신하고, 수신기에서는 송신기에서 사용했던 Walsh code(N=16)와 PN code를 사용하여 역확산 후 source data를 확인하였다. 송수신기의 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx foundation3.1을 사용하여 VHDL simulation을 수행하였고, FPGA 회로설계 검증 장비인 EDA-Lab 3000 장비를 사용하여 Xilinx사의 SPARTAN2 2S100PQ208칩에 다운로드 한 후 에뮬레이션 툴 인 Design-Pro shop을 사용하여 설계된 회로의 동작을 확인하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.895-898
• /
• 2003

The higher precision is demanded in modem manufacturing and it requires the more accurate servo controller. Cross-coupling control (CCC) has been developed to improve contouring motion. In this paper we introduce a new nonlinear CCC that is based on contour-error-vector using a parametric curve interpolator. A vector from the actual tool position to the nearest point on the desire path is directly adopted. The contour-error-vector is determined by constructing a tangential vector of nearest point on desired curve and determining the vector perpendicular to this tangential vector from the actual tool position. Moreover, the vector CCC can apply directly and easily to free-form curves include convex and concave form. The experimental results on a three-axis CNC machine center show that the present approach significantly improves motion accuracy in multi-axis motion