• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.568-574
• /
• 2000

This paper presents the vibration characteristics of a continuous circular cylindrical shell multi-simply supported at arbitrary axial positions for searching design parameters. In this modal test the impulse test method is applied to the excitation of experimental model. Natural frequencies are obtained from the peak points of frequency response function(FRF) through frequency analyzer and vibration behaviors are investigated. FE analysis is performed with ANSYS 5.5 to improve the reliability of experimental results. Their results are compared with experimental results. The effect of dynamic characteristics is analyzed for the number of support point on the shell.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1938-1948
• /
• 2003

This paper represents that an enhanced genetic algorithm (EGA) is applied to optimal design of a squeeze film damper (SFD) to minimize the maximum transmitted load between the bearing and foundation in the operational speed range. A general genetic algorithm (GA) is well known as a useful global optimization technique for complex and nonlinear optimization problems. The EGA consists of the GA to optimize multi-modal functions and the simplex method to search intensively the candidate solutions by the GA for optimal solutions. The performance of the EGA with a benchmark function is compared to them by the IGA (Immune-Genetic Algorithm) and SQP (Sequential Quadratic Programming). The radius, length and radial clearance of the SFD are defined as the design parameters. The objective function is the minimization of a maximum transmitted load of a flexible rotor system with the nonlinear SFDs in the operating speed range. The effectiveness of the EGA for the optimal design of the SFD is discussed from a numerical example.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.626-632
• /
• 2009

An Edutainment Contents help the learners to recognize the problems effectively, grasp and classify important information needed to solve the problems and convey the contents of what they have learned. Owing not only to this game-like fun but also to the educational effect, The Edutainment contents can be usefully applied to education and training in the areas of scientific technology and industrial technology. This study proposes the Edutainment that users can apply to biotechnology by using intuitive multi-modal interfaces. In this study, a stereoscopic monitor is used to make three dimensional molecular structures, and multi-modal interface is used to efficiently control. Based on the system, this study easily solved the docking simulation function, which is one of the important experiments, by applying these game factors. For this, we suggested the level-up concept as a game factor that depends on numbers of objects and users.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.59-65
• /
• 2009

An Edutainment Contents help the learners to recognize the problems effectively, grasp and classify important information needed to solve the problems and convey the contents of what they have learned. Owing not only to this game-like fun but also to the educational effect, The Edutainment contents can be usefully applied to education and training in the areas of scientific technology and industrial technology. This study proposes the Edutainment that users can apply to biotechnology by using intuitive multi-modal interfaces. In this study, a stereoscopic monitor is used to make three dimensional molecular structures, and multi-modal interface is used to efficiently control. Based on the system, this study easily solved the docking simulation function, which is one of the important experiments, by applying these game factors. For this, we suggested the level-up concept as a game factor that depends on numbers of objects and users.

• Journal of Korea Game Society
• /
• v.9 no.1
• /
• pp.93-103
• /
• 2009

A Serious Game helps the learners to recognize the problems effectively, grasp and classify important information needed to solve the problems and convey the contents of what they have learned. Owing not only to this game-like fun but also to the educational effect, The Serious Game can be usefully applied to education and training in the areas of scientific technology and industrial technology. This study proposes the Serious Game that users can apply to biotechnology by using intuitive multi-modal interfaces. In this study, a stereoscopic monitor is used to make three dimensional molecular structures, and multi-modal interface is used to efficiently control. Based on a such system, this study easily solved the docking simulation function, which is one of the important experiments, by applying these game factors. For this, we suggested the level-up concept as a game factor that depends on numbers of objects and users. The proposed system was evaluated in performance comparison in result time of a new drug design process on AIDS virus with previous approach.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.645-657
• /
• 2015

In this study floor impact noise and structure acceleration response of bare concrete slabs were predicted by using Finite Element Analysis(FEA). Prediction results were compared with experimental results to prove the accuracy of numerical model. Acoustic absorption were addressed by using panel impedance coefficients with frequency characteristics and structural modal damping of numerical model were applied by modal testing results and analysis of prediction and test results. By using frequency response function, the floor acceleration and acoustic pressure responses for various impact sources were calculated at the same time. In the FEA, the natural frequencies and the shapes of vibration and acoustic modes can be estimated through the eigen-value analysis, and it can be visually seen the vibration and sound pressure field and the contribution of major modes.

• Journal of information and communication convergence engineering
• /
• v.18 no.2
• /
• pp.132-146
• /
• 2020

Biometric technologies have become widely available in many different fields. However, biometric technologies using existing physical features such as fingerprints, facial features, irises, and veins must consider forgery and alterations targeting them through fraudulent physical characteristics such as fake fingerprints. Thus, a trend toward next-generation biometric technologies using behavioral biometrics of a living person, such as bio-signals and walking characteristics, has emerged. Accordingly, in this study, we developed a bio-signal authentication algorithm using electrocardiogram (ECG) signals, which are the most uniquely identifiable form of bio-signal available. When using ECG signals with our system, the personal identification and authentication accuracy are approximately 90% during a state of rest. When using fingerprints alone, the equal error rate (EER) is 0.243%; however, when fusing the scores of both the ECG signal and fingerprints, the EER decreases to 0.113% on average. In addition, as a function of detecting a presentation attack on a mobile phone, a method for rejecting a transaction when a fake fingerprint is applied was successfully implemented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.266-270
• /
• 2006

Noise reduction the noise of a high precision multi-stage gearbox applied at the industrial robot is investigated by experiment such as the modal test and the signal analysis. The signal analysis performed with the waterfall plot representing the power spectrum as a function of the rotating speed. An eccentric load is installed at the gearbox in order to organize similar condition used in the industrial robot. Exciting sources are found out by the waterfall plot, and then the main factor to make the noise is distinguish. For the low-noise gearbox, the gear design parameter is modified and this gearbox is experimented in the same procedure. The results of the test show the noise level of gearbox reduced.

• Smart Structures and Systems
• /
• v.15 no.5
• /
• pp.1253-1270
• /
• 2015

In this paper Magnetic Charged System Search (MCSS) and Particle Swarm Optimization (PSO) are applied to the problem of damage detection using frequencies and mode shapes of the structures. The objective is to identify the location and extent of multi-damage in structures. Both natural frequencies and mode shapes are used to form the required objective function. To moderate the effect of noise on measured data, a penalty approach is applied. A variety of numerical examples including two beams and two trusses are considered. A comparison between the PSO and MCSS is conducted to show the efficiency of the MCSS in finding the global optimum. The results show that the present methodology can reliably identify damage scenarios using noisy measurements and incomplete data.