• Title/Summary/Keyword: multi-log

Search Result 190, Processing Time 0.029 seconds

A Multi-Antenna Mobile Measurement System for DTV Coverage Measurement (DTV 커버리지 측정을 위한 다중 안테나 이동측정시스템)

  • Jeong, Young-Seok;Yang, Hae-Sool
    • Journal of Digital Convergence
    • /
    • v.11 no.11
    • /
    • pp.85-94
    • /
    • 2013
  • This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

Estimating speech parameters for ultrasonic Doppler signal using LSTM recurrent neural networks (LSTM 순환 신경망을 이용한 초음파 도플러 신호의 음성 패러미터 추정)

  • Joo, Hyeong-Kil;Lee, Ki-Seung
    • The Journal of the Acoustical Society of Korea
    • /
    • v.38 no.4
    • /
    • pp.433-441
    • /
    • 2019
  • In this paper, a method of estimating speech parameters for ultrasonic Doppler signals reflected from the articulatory muscles using LSTM (Long Short Term Memory) RNN (Recurrent Neural Networks) was introduced and compared with the method using MLP (Multi-Layer Perceptrons). LSTM RNN were used to estimate the Fourier transform coefficients of speech signals from the ultrasonic Doppler signals. The log energy value of the Mel frequency band and the Fourier transform coefficients, which were extracted respectively from the ultrasonic Doppler signal and the speech signal, were used as the input and reference for training LSTM RNN. The performance of LSTM RNN and MLP was evaluated and compared by experiments using test data, and the RMSE (Root Mean Squared Error) was used as a measure. The RMSE of each experiment was 0.5810 and 0.7380, respectively. The difference was about 0.1570, so that it confirmed that the performance of the method using the LSTM RNN was better.

Design and Implementation of Multi-functional Java Card for AMR (원격검침을 위한 다기능 자바카드 설계 및 구현)

  • Kang, Hwan-Soo;Cho, Jin-Hyung;Kwon, Kwi-Seok;Lee, Jong-Man;Kang, Hwan-Il
    • The Journal of the Korea Contents Association
    • /
    • v.9 no.8
    • /
    • pp.64-72
    • /
    • 2009
  • AMR(Automatic Meter Reading), which means that it reads the meter of electricity, gas, or water, etc at a remote place automatically through wired or wireless communication, has been studied in terms of Power Line Communication method and Local Area Wireless Communication method, etc. In this paper, we designed and implemented JCA(Java Card for AMR) capable of AMR, which is based on java Card technology indispensable to the ubiquitous world. In this paper, JCA follows standard transactional procedures offered by power supply company and manages power usage log and billing data, and is designed in order to satisfy EMV multi-functional specifications. Because JCA is a multi-functional smart card capable of post-issuance applets as an open platform, it is installed into other applications of affiliated concerns as well as credit card and traffic card applications. Not only the proposed JCA is a low cost system, compared to other AMR systems, but is capable of paying rates in advance or later by applying authentication and security function of java Card. In addition the proposed JCA system can create value added services such as affiliated services with corporate alliance.

Analysis and Response of SSH Brute Force Attacks in Multi-User Computing Environment (다중 사용자 컴퓨팅 환경에서 SSH 무작위 공격 분석 및 대응)

  • Lee, Jae-Kook;Kim, Sung-Jun;Woo, Joon;Park, Chan Yeol
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.4 no.6
    • /
    • pp.205-212
    • /
    • 2015
  • SSH provides a secure, encrypted communication channel between two end point systems using public key encryption. But SSH brute force attack is one of the most significant attacks. This kind of attack aims to login to the SSH server by continually guessing a large number of user account and password combinations. In this paper, we analyze logs of SSH brute force attacks in 2014 and propose a failed-log based detection mechanism in high performance computing service environment.

Sequential Pattern Mining for Intrusion Detection System with Feature Selection on Big Data

  • Fidalcastro, A;Baburaj, E
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.10
    • /
    • pp.5023-5038
    • /
    • 2017
  • Big data is an emerging technology which deals with wide range of data sets with sizes beyond the ability to work with software tools which is commonly used for processing of data. When we consider a huge network, we have to process a large amount of network information generated, which consists of both normal and abnormal activity logs in large volume of multi-dimensional data. Intrusion Detection System (IDS) is required to monitor the network and to detect the malicious nodes and activities in the network. Massive amount of data makes it difficult to detect threats and attacks. Sequential Pattern mining may be used to identify the patterns of malicious activities which have been an emerging popular trend due to the consideration of quantities, profits and time orders of item. Here we propose a sequential pattern mining algorithm with fuzzy logic feature selection and fuzzy weighted support for huge volumes of network logs to be implemented in Apache Hadoop YARN, which solves the problem of speed and time constraints. Fuzzy logic feature selection selects important features from the feature set. Fuzzy weighted supports provide weights to the inputs and avoid multiple scans. In our simulation we use the attack log from NS-2 MANET environment and compare the proposed algorithm with the state-of-the-art sequential Pattern Mining algorithm, SPADE and Support Vector Machine with Hadoop environment.

A Mobile Flash File System - MJFFS (모바일 플래시 파일 시스템 - MJFFS)

  • 김영관;박현주
    • Journal of Information Technology Applications and Management
    • /
    • v.11 no.2
    • /
    • pp.29-43
    • /
    • 2004
  • As the development of an information technique, gradually, mobile device is going to be miniaturized and operates at high speed. By such the requirements, the devices using a flash memory as a storage media are increasing. The flash memory consumes low power, is a small size, and has a fast access time like the main memory. But the flash memory must erase for recording and the erase cycle is limited. JFFS is a representative filesystem which reflects the characteristics of the flash memory. JFFS to be consisted of LSF structure, writes new data to the flash memory in sequential, which is not related to a file size. Mounting a filesystem or an error recovery is achieved through the sequential approach. Therefore, the mounting delay time is happened according to the file system size. This paper proposes a MJFFS to use a multi-checkpoint information to manage a mass flash file system efficiently. A MJFFS, which improves JFFS, divides a flash memory into the block for suitable to the block device, and stores file information of a checkpoint structure at fixed interval. Therefore mounting and error recovery processing reduce efficiently a number of filesystem access by collecting a smaller checkpoint information than capacity of actual files. A MJFFS will be suitable to a mobile device owing to accomplish fast mounting and error recovery using advantage of log foundation filesystem and overcoming defect of JFFS.

  • PDF

Catch Specification of Japanese Tuna Purse Seine in the Western Pacific Ocean (서부태평야지역에서 일본 다랑어선망어업의 어획특성)

  • 김형석
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.35 no.3
    • /
    • pp.243-249
    • /
    • 1999
  • Specificity of catches has been analyzed to japanese tuna purse seine A principle component analysis was used to improve the efficiency of fishing and increase sustainable production and productivity of Korean tuna purse seine.The result are as follows;From the principal component analysis of the fish catches, the first principal component(Z1) to promote principal component score was skipjack Kastsuwonus Pelamis, LINNAEUS and yellowfin tuna Thunnus Albacares, BONNATERRE (Small : smaller than 10kg) and proportion was 86.8% of total. The second principal component(Z2) to increase principal component score was yellowfin tuna (Large : larger than 10kg) and proportion was 9.5%.On the other hand, fish operating that have caught skipjack and yellowfin tuna (Small and Larger) was not so much. Fish catches for one species raised volume of the catches while catches for multi-species decreased it since principal composition score for one species and both species together has been increased.Fish school could be divided into three groups of schools each of which was associated with drift objects, payaho and ship, school associated with shark, whale and porpoise and school of breezing, feeding and jumping from proportion of principal component analysis for fish catches of school types. However, the biological pattern is different among school associated with ship, payaho and school associated with drift objects for analysis eigen vector. School associated with ship, payaho and school associated with drifting object associated is judged as school which be assembled to vessel and drifted log temporary.

  • PDF

The investigation of an age as a prognostic factor of breast cancer (유방암의 예후인자로서 젊은 연령에 대한 고찰)

  • No, Dong-Yeong
    • Journal of Korea Association of Health Promotion
    • /
    • v.2 no.1
    • /
    • pp.39-46
    • /
    • 2004
  • Purpose:It has been known that the prognosis of a young woman's breast cancer is Poorer than the other woman However, the effect of age on the prognosis is not well-defined We performed this study to investigate age as a prognostic factor of breast cancer. Materials and Methods : A retrospective study was conducted for 3209 breast cancer patients who underwent operations in Department of Surgery, Seoul National University Hospital from January 1981 to December 2000. Patients were divided into two groups, young age(≤35) and old age(>35) groups. And tumor stage, histopathologic characteristics(such as histology, nuclear grade, histologic grade, hormonal receptor, etc), overall survival and disease free survival rates were compared between age groups. Results . The age ranged from 17 to 88 years. 396 patients(12.3%) were included in young age group(median=32) and 2813 Patients(87.7%) in old age group(median=47).There are more advanced stages and poor nuclear grades in young age group(p=0.000, p=0.003), By log-rank test, the young age group had poorer overall survival and disease free survival rates(p<0.05, p=0.0002). Although, the young age group had more advanced TMN stages(p=0.000) and poorer nuclear grade than the old age group(p=0.003) in multi variate analysis, the age was not a significant independent prognostic factor. (P=0.642)Conclusion: Our study showed that the age was not a significant independent prognostic factor.

  • PDF

Evaluation of chassis component reliability considering variation of fatigue data (피로 자료 분산을 고려한 자동차 부품의 신뢰도 해석)

  • Nam G.W;Lee B.C.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.690-693
    • /
    • 2005
  • In this paper, probabilistic distribution of fatigue life of chassis component is determined statistically by applying the design of experiments and the Pearson system. To construct $p-\varepsilon-N$ curve, the case that fatigue data are random variables is attempted. Probabilistic density function(p.d.f) for fatigue life is obtained by design of experiment and using this p.d.f fatigue reliability about any aimed fatigue life can be calculated. Lower control arm and rear torsion bar of chassis component are selected as examples for analysis. Component load histories, which are obtained by multi-body dynamic simulation for Belsian load history, are used. Finite element analysis are performed using commercial software MSC Nastran and fatigue analysis are performed using FE Fatigue. When strain-life curve itself is random variable, probability density function of fatigue life has very little difference from log-normal distribution. And the case of fatigue data are random variables, probability density functions are approximated to Beta distribution. Each p.d.f is verified by Monte-Carlo simulation.

  • PDF

Trimmed LAD Estimators for Multidimensional Contingency Tables (분할표 분석을 위한 절사 LAD 추정량과 최적 절사율 결정)

  • Choi, Hyun-Jip
    • The Korean Journal of Applied Statistics
    • /
    • v.23 no.6
    • /
    • pp.1235-1243
    • /
    • 2010
  • This study proposes a trimmed LAD(least absolute deviation) estimators for multi-dimensional contingency tables and suggests an algorithm to estimate it. In addition, a method to determine the trimming quantity of the estimators is suggested. A Monte Carlo study shows that the propose method yields a better trimming rate and coverage rate than the previously suggest method based on the determinant of the covariance matrix.