• Steel and Composite Structures
• /
• 제29권5호
• /
• pp.569-578
• /
• 2018

This paper aims to investigate the transient vibration behavior of functionally graded carbon nanotube (FG-CNT) reinforced nanocomposite plate resting on Pasternak foundation under pulse excitation. The plate is considered to be composed of matrix material and multi-walled carbon nanotubes (MWCNTs) with distribution as per the functional grading concept. The functionally graded distribution patterns in nanocomposite plate are explained more appropriately with the layer-wise variation of carbon nanotubes weight fraction in the thickness coordinate. The layers are stacked up in such a way that it yields uniform and three other types of distribution patterns. The effective material properties of each layer in nanocomposite plate are obtained by modified Halpin-Tsai model and rule of mixtures. The governing equations of an illustrative case of simply-supported nanocomposite plate resting on the Pasternak foundation are derived from third order shear deformation theory and Navier's solution technique. A converge transient response of nanocompiste plate under uniformly distributed load with triangular pulse is obtained by varying number of layer in thickness direction. The validity and accuracy of the present model is also checked by comparing the results with those available in literature for isotropic case. Then, numerical examples are presented to highlight the effects of distribution patterns, foundation stiffness, carbon nanotube parameters and plate aspect ratio on the central deflection response. The results are extended with the consideration of proportional damping in the system and found that nanocomposite plate with distribution III have minimum settling time as compared to the other distributions.

• 대한토목학회논문집
• /
• 제26권6D호
• /
• pp.951-960
• /
• 2006

본 연구에서는 실제 주행차량의 수평하중이 다양한 층 경계면 마찰계수 상태의 포장구조체에 미치는 영향을 고찰하기 위해 수평하중을 고려한 포장구조해석 모델링을 구축하였다. 기존 해석프로그램의 경계층 평가분석을 고찰하기 위하여 기존 다층탄성해석프로그램인 KENLAYER와 구축된 모델링을 이용한 상용 유한요소해석프로그램 ABAQUS 로부터 연직하중과 수평하중이 작용하는 경우 및 하중조합의 경우 포장체 거동을 비교분석하였다. 또한 각각의 하중상태하에서 경계층 상태에 따른 포장구조체의 공용성을 평가한 후, 연직하중과 수평하중이 동시에 가해지는 포장구조체의 경계면 상태에 따른 영향계수의 데이터베이스를 구축하였다. 기존의 주행차량의 연직하중만을 고려한 경우와 실제 주행차량의 수평하중과 연직 하중을 고려한 경우 포장구조체에 미치는 영향을 분석한 결과, 수평하중의 작용으로 인해 공용수명이 약 1/300로 감소하므로, 포장구조해석시 주행차량의 수평하중을 고려한 층 경계면 영향계수 개발이 필요함을 알 수 있었다. 또한 국내 고속도로의 대표단면을 이용하여 수치해석을 실시한 결과, 아스팔트층의 두께가 얇을수록, 또한 아스팔트층의 탄성계수가 작을수록 경계면 상태에 큰 영향을 받음을 알 수 있었다. 포장구조해석시 주행차량의 수평하중을 고려하기 위하여 포장구조체 공용수명에 영향을 미치는 아스팔트층의 두께, 탄성계수, 그리고 경계면 조건으로부터 아스팔트층 하부의 인장변형률을 결정하는 인장변형률 예측식을 제안하였고, 공용중인 포장구조체의 두께와 탄성계수를 이용하여 인장변형률 예측식을 해석적으로 검증하였다. 또한 제안된 예측식을 이용하여 아스팔트층과 보조기층 사이의 접합여부에 따른 인장변형률 영향계수를 개발하였다.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1045-1057
• /
• 2009

The authors investigated the InGaN/GaN multi-quantum well blue light emitting devices with the implementation of the photonic crystals fabricated at the top surface of p-GaN layer and the bottom interface of n-GaN layer. The top photonic crystals result in the lattice-dependent photoluminescence spectra at the wavelength of 450 nm and however, the bottom photonic crystal shows a big shift of the photoluminescence peak from 444 nm to 394 nm. The sample with the bottom photonic crystal structure also shows the lasing effect at the wavelength of 468 nm. Furthermore, the quality enhancement for the crystal growth of GaN thin film on the bottom photonic crystal comes from the modulated compressive stress which was measured by the micro-Raman spectroscopy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 1996

We developed three dimensional Monte carlo ion implantation simulator which simulate distributions of impurities under the ion implantation on the tilted multi-layered layer. Our simulation reveals three dimensional shadow effect and sidewall scattering effect due to the geometrical shapes. For the evaluation of the developed three dimensional Monte carlo ion implantation simulator, calculations with 100,000 ions have been performed for the island and hole structures with a thin oxide of 100$\AA$ and nitride of 2000$\AA$. The simulation results showed that the distribution of ion decreases near the conner of the hole structure covered with a nitride layer and increases near the conner for the island structure open to oxide. Moreover, three dimensional distributions of ions were obtained with varying incident energy, tilt and rotation angle, mask depth and three-dimensional structure geometry.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.22-29
• /
• 2004

As a result of high integration of semiconductor device, the global planarization of multi-layer structures is necessary. So the chemical mechanical polishing(CMP) is widely applied to manufacturing the dielectric layer and metal line in the semiconductor device. CMP process is under influence of polisher, pad, slurry, and process itself, etc. In comparison with the general CMP which uses the slurry including abrasives, fixed abrasive pad takes advantage of planarity, resulting from decreasing pattern selectivity and defects such as dishing & erosion due to the reduction of abrasive concentration especially. This paper introduces the manufacturing technique of fixed abrasive pad using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. And the tungsten CMP using fixed abrasive pad achieved the good conclusion in terms of the removal rate, non-uniformity, surface roughness, material selectivity, micro-scratch free contemporary with the pad life-time.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.425-431
• /
• 2012

Utilizing the three-dimensional Snyder-Mitchell model with a PT-symmetric potential, we study the influence of PT symmetry on beam propagation in strongly nonlocal nonlinear media. The complex Coulomb potential is used as the PT-symmetric potential. A localized spatiotemporal accessible soliton solution of the model is obtained. Specific values of the modulation depth for different soliton parameters are discussed. Our results reveal that in these media the localized solitons can exist in various shapes, such as single-layer and multi-layer disk-shaped structures, as well as vortex-ring and necklace patterns.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.208-209
• /
• 2021

In 2017, 100 aftershocks with a magnitude of 2.0~3.0 and 615 minor earthquakes in Pohang in Korea caused the collapse and destruction of aggregate, tile, glass, and other structural components of multi-family houses constructed as finishing materials for buildings, causing damage to vehicles and casualties. Based on this factor, seismic design standards were established for non-structural elements of buildings that were applied only to past structures. Therefore, this study reinterpreted various vibration response spectra transmitted to waterproof layers as well as the definition and concept of the waterproof layer demand response spectrum derived by developing various vibration response test evaluation devices through a new testing apparatus.

• 한국지반공학회지:지반
• /
• 제6권4호
• /
• pp.19-32
• /
• 1990

일반적으로 지반은 복잡하고 다양한 다층구조로 되어있다. 이러한 다층토 지반을 해석 하기 위 해 본문은 지반의 구성식,층의 구조와 두께, 각층의 강성, 재하조건 등을 변화시켜 수치해석 하였다. 기존의 다층토 지반은 Burmister의 2층계이론인 탄성해로 지중응력분포를 해석하였으나,여기서는 Biot방정식을 지배방정식으로하여 개발된 지반해석프로그램에 탄 .점소성구성식을 이용하여 층의 조건에 관계없이 2층이상의 모든 다층토지반의 지중응력분포를 해석 하고자 한다. 이들의 결과를 Burmister나 Fok의 결과와 비교하였으며, 서로 근접한 결과를 얻었다. 따라서, 본 연구는 다양한 다층토 지반을 전산 프로그램을 이용하여 실제에 가까운 응력전달기구 를 밝히려는 목적으로 수행된 것이다.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.15-25
• /
• 2018

This work presents the buckling investigation of embedded orthotropic nanoplates such as graphene by employing a new refined plate theory and nonlocal small-scale effects. The elastic foundation is modeled as two-parameter Pasternak foundation. The proposed two-variable refined plate theory takes account of transverse shear influences and parabolic variation of the transverse shear strains within the thickness of the plate by introducing undetermined integral terms, hence it is unnecessary to use shear correction factors. Nonlocal governing equations for the single layered graphene sheet are obtained from the principle of virtual displacements. The proposed theory is compared with other plate theories. Analytical solutions for buckling loads are obtained for single-layered graphene sheets with isotropic and orthotropic properties. The results presented in this study may provide useful guidance for design of orthotropic graphene based nanodevices that make use of the buckling properties of orthotropic nanoplates.

• BioChip Journal
• /
• 제12권4호
• /
• pp.280-286
• /
• 2018

Hydrogel scaffolds composed of multiple components are promising platform in tissue engineering as a transplantation materials or artificial organs. Here, we present a new fabrication method for implementing multi-layered macroscopic hydrogel scaffold composed of multiple components by controlling height of hydrogel layer through precise control of ultraviolet (UV) energy density. Through the repetition of the photolithography process with energy control, we can form several layers of hydrogel with different height. We characterized UV energy-dependent profiles with single-layered PEGDA posts photocrosslinked by the modular methodology and examined the optical effect on the fabrication of multi-layered, macroscopic hydrogel structure. Finally, we successfully demonstrated the potential applicability of our approach by fabricating various macroscopic hydrogel constructs composed of multiple hydrogel layers.