• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.474-479
• /
• 1998

In this paper, the structural behavior of R.C. multi-layered floor structure including foam concrete layer is numerically analyzed. For the analysis, 3D interface element has been implemented to finite element analysis program to consider the interfacial behavior of multi-layered floor structure which consists of rubber layer, foam concrete layer and mortar layer on RC slab. Based on analysis results on multi-layered structure, its structural behavior is analyzed according to geometrical and material properties of foam concrete. Optimum material property of each layer of the floor structure is proposed to get optimum multi-layered concrete structure.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.167-173
• /
• 2014

A novel multi-oxide layer structure for vertical cavity surface emitting laser (VCSEL) structures is proposed to achieve higher single mode output power. The structure has four oxide layers with different aperture sizes and thicknesses. The oxide layer thicknesses are optimized simultaneously to reach the highest single mode output power. A heuristic method is proposed for plotting the influence of these variable changes on the operation of optical output power. A comprehensive optical-electrical thermal-gain self-consistent VCSEL model is used to simulate the continuous-wave operation of the multi-layer oxide VCSELs. A comparison between optimized VCSELs with different structures is presented. The results show that by using multi-oxide layers with different thicknesses, higher single-mode optical output power could be achieved in comparison with multi-oxide layer structures with the same thicknesses.

• 수산해양기술연구
• /
• 제33권2호
• /
• pp.141-148
• /
• 1997

This paper is concerned with the vibration control of multi-layer structure for ultra-tall buildings and main tower of large bridge etc. We have modeled the multi-layer structure with the distributed mass system as the lumped mass system of two-degree-of-freedom structure and made experimental equipment. The LQ optimal control theory is applied to the design of the control system. The designed control system is simulated by computer. As a result, the LQ regulator showed good vibration control performance with impact excitation.

• 소음진동
• /
• 제7권5호
• /
• pp.803-810
• /
• 1997

This paper is concerned with the vibration control of multi-layer structure for ultra-tall buildings and main tower of large bridge etc. We have modeled the multi-layer structure with the distributed mass system as the lumped mass system of two-degree-of-freedom structure and made experimental equipment. The $H_\infty$control theory was applied to the design of the control system. The designed control system was simulated by computer. As a result, the designed $H_\infty$controller showed the good vibration control performance to impulse response and frequency response.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.96-111
• /
• 2012

Hull Mounted Sonar (HMS) is a long range submerged vehicle's hull-mounted passive sonar system which detects low-frequency noise caused by machineries of enemy ships or submerged vehicles. The HMS needs a sound absorption /insulation multi-layer structure to shut out the self-noise from own machineries and to amplify signals from outside. Therefore, acoustic analysis of the multi-layer system should be performed when the HMS is designed. This paper simplified the HMS multi-layer system to be an infinite planar multi-layer model. Also, main excitations that influence the HMS were classified into mechanical, plane wave and turbulent flow excitation, and the investigations for each excitation were performed for various models. Stiffened multi-layer analysis for mechanical excitation and general multi-layer analysis for turbulent flow excitation were developed. The infinite planar multi-layer analysis was expected to be more useful for preliminary design stage of HMS system than the infinite cylindrical model because of short analysis time and easiness of parameter study.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2039-2044
• /
• 2009

본 논문에서는 다층형 결합 선로를 이용한 PSK 반송파 신호 복원 회로를 해석하고 설계 제작한다. 다층형 결합 선로 구조의 coupled line으로 구성되는 반송파 복원 6단자 소자는 다층형 구조를 가지며, 수신 전처리부의 6 단자 위상 상관기 구조와 동일한 구조를 갖는 일원화된 수신 구조 구현이 가능하다. 아울러 다층 결합 선로 6 단자 위상 상관기를 이용한 RML 기반 다중 모드 동기 복조형 반송파 신호 복원이 가능한 다층형 결합 선로 반송파 복원 회로 구조를 제안한다. 설계 제작된 다층형 결합 선로 구조 반송파 복원회로에 의한 직교 위상편이 방식 신호의 반송파 신호는 일정한 위상값과 반사 소자에 의해 발생되는 ${\pm}3o$ 이내인 위상차를 갖는 양호한 PSK 반송파 신호 특성을 나타내었다.

• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2267-2272
• /
• 2009

본 논문에서는 다층형 결합 선로를 이용한 6-단자 위상 상관기와 동일한 구조를 갖는 반송파 복원기 그리고 위상 변위기를 갖는 일원화된 6-단자 직접변환 수신 전처리부를 설계 제작한다. 전력 분배기와 하이브리드 결합기로 구성되는 6-단자 소자는 다층형 결합 선로 구조로 이루어지며, 수신부 위상 상관기와 반송파 복원기 그리고 위상 변위기의 기본 구조 요소로 작용한다. 다층형 결합 선로 구조로 구성되는 일원화된 수신 전처리부는 구성이 간단하고 집적화가 용이하다. 설계 제작된 다층형 결합 구조 6-단자 수신 전처리부는 일정한 반송파 신호를 재생하고, PSK 전송 신호를 복원한다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.331-338
• /
• 2021

Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three ㎛-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 ℃ molten metallic glass.

• 한국공간구조학회논문집
• /
• 제13권2호
• /
• pp.75-82
• /
• 2013

For each cable component in a cable dome structure, pre-tension is needed for stability of whole the structure. The summation of these pre-tension at each joint should be zero to achieve the self equilibrium structure. The first step in cable dome structure analysis is to find the ratio of pre-tension in each member which can produce a stable and structure on self-equilibrium. In this paper, a new method based on the basic principle of closed force polygon for equilibrium system is proposed for the determination of self-equilibrium mode of cable dome structure. A single layer cable dome and two multi layer type domes have been analyzed. The ratios of cable members are determined by the presented method, and check the validation of the results by numerical calculation.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.78-83
• /
• 2019

In this study, we analyze the structure of the transceiver coil in the inductive power transfer (IPT) system. In the IPT system, the transceiver coil design needs to have the highest magnetic coupling possible because of the relatively low magnetic coupling due to the large gap of distance without the core. The transmitting coil may be formed as a multi-layer type according to the distance between the transmitting and receiving coils if the receiving coil is configured as a multi-layer type on the inner structure of the receiving apparatus, thereby improving the magnetic coupling and system efficiency. We compare and analyze the coil magnetic coupling, and system efficiency according to the layer structure of the transmitting and receiving coils and verify the analysis by JMAG simulation. Experimental results show that the layer structure of the transceiver should be considered according to the inner space of the receiving device and the spacing distance.