• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.227-234
• /
• 2008

The development of wireless network technology allows high data rate seamless communication irrespective of the place and time in various emerging mobile service environment. Unlike wired networks, however, wireless networks utilize expensive limited bandwidth. MBS(Multicast Broadcast Service), which is supported by mobile WiMAX system based on IEEE802.16e, overcomes this problem using a shared downlink channel for efficiently supporting a number of users. However. the coverage and throughput of the system are significantly affected by the channel condition. In this paper we propose on MBS system employing Mobile Multi-Hop Relay(MMR) and adaptive modulation and coding(AMC) scheme. The result of NS-2 computer simulation shows that the throughput and transmission time are substantially improved by the proposed approach compared to the existing MBS system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.471-476
• /
• 2015

In this paper, we propose an energy efficient hybrid MAC protocol for multi-hop wireless sensor networks. The proposed MAC protocol used a hybrid mechanism, in which contention-based MAC protocol and contention free MAC protocol are combined. The sensor nodes located far from the sink node usually send few data packet since they try to send measured data by themselves. So contention-based MAC protocol is useful among them. But other nodes located near sink node usually have lots of data packets since they plays as a relay node. Contention-based MAC protocol among them is not suitable. Using contention-based MAC protocol in heavy data traffic environment, packet collisions and transmission delay may increase. In this paper, slot assignment between sender nodes by sink node is used. The proposed mechanism is efficient in energy and latency. Results showed that our MAC protocol outperformed other protocol in terms of data packet delivery delay and energy consumption.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.596-598
• /
• 2003

다중홉 (multi-hop) 이동 애드혹 앙 (ad-hoc network)에서 무결정성 (seamless) 통신이 이루어지기 위해 효율적인 라우팅 프로토콜을 필요로 한다. AODV (Ad-hoc On-demand Distance Vector) 라우팅 프로토콜은 단지 먼저 수신된 경로 요구 (route request) 메시지가 전달되어 온 경로만을 고려 할 뿐, 경로 탐색 과정에 있어 각 노드에서의 에너지 사용량을 반영하지 못하고 있다. 이 논문에서는 AODV 라우팅 프로토콜에 기존에 제안된 MTPR (Minimum Total Transmission Power Routing) 방법을 효율적으로 적용할 수 있는 경로 탐색 방법을 제안한다.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.135-141
• /
• 2018

Wireless sensor networks (WSN) are composed of a large number of sensor nodes. Battery-powered sensor nodes have limited coverage; therefore, it is more efficient to transmit data via multi-hop communication. The network lifetime is a crucial issue in WSNs and the multi-hop routing protocol should be designed to prolong the network lifetime. Prolonging the network lifetime can be achieved by minimizing the power consumed by the nodes, as well as by balancing the power consumption among the nodes. A power imbalance can reduce the network lifetime even if several nodes have sufficient (battery) power. In this paper, we propose a routing protocol that prolongs the network lifetime by balancing the power consumption among the nodes. To improve the balance of power consumption and improve the network lifetime, the proposed routing scheme adaptively controls the transmission range using a power control according to the residual power in the nodes. We developed a routing simulator to evaluate the performance of the proposed routing protocol. The simulation results show that the proposed routing scheme increases power balancing and improves the network lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.411-417
• /
• 2008

This paper proposes BSFP (Bluetooth Scatternet Formation Protocol), which establishes a multi-hop bluetooth scatternet. BSFP independently operates on each bluetooth device, does not require any information on neighbor devices at the very beginning, and can establish a scatternet even though all the devices are spreaded beyond the bluetooth transmission range. BSFP is composed of the following three stages; 1) Init stage to investigate neighbor nodes, 2) Ready stage to establish a scatternet using gathered local information at each node, and 3) Complete stage to use the determined scatternet links. In BSFP, the scatternet formation time does not significantly affected by the number of bluetooth devices and a robust mobile ad hoc network is formed because BSFP formulates a scatternet with many adjacent links to neighbor devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.580-581
• /
• 2018

In order to reduce end-to-end delay in EH-WSN (energy harvestin wireless sensor netowk), medium access control protocols using multi-hop routing technique have been studied. In a real environment, there are many situations where it is difficult to harvest enough energy than the energy consumed. Therefore, it is required to design a MAC protocol that allows nodes to reliably relay data without exhausting power in multi-hop transmission. In this paper, we propose a power-efficient MAC protocol that can select the relay node according to the residual power and the energy collection rate to increase network lifetime.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.848-857
• /
• 2011

Due to the advantages of a conveniet, inexpensive installation, flexibility, and scalability, Wireless AMR systems are recently preferred over wired AMR systems. However, a multi-hop supported AMR network, which generally covers large areas, may create energy wastage problem, energy unbalance, and high interference hazard due to a large amount of concurrent-intensive metering data in the network. Therefore in this paper we propose a novel data gathering method which can solve abovementioned problems as well as conserve energy, by reducing the traffic in the network. In addition, the experimental results demonstrate that the proposed scheme shows superior performance to the conventional data transmission method.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.297-305
• /
• 2010

A home healthcare system based wireless sensor network, which can continuously monitor and manage the elderly's electrocardiogram(ECG) signal at any space at home without space limit is proposed. The communication coverage of wireless network is expended by multi-hop wireless sensor network. In order to send the elderly's ECG data wirelessly, a small size ECG sensor node was designed to forward the ECG data over multi-hop relay network. The packet acquired by mobile ECG node is transmitted through wireless intermediate nodes to base station for analyzing the packet reception rate. Modified minimum cost forwarding(MMCF) protocol and flooding protocol are designed and implemented to check the transmission efficiency of a packet in a wireless sensor network. The developed MMCF protocol shows an advantage of high reception rate by reduced network traffic.