• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.372-380
• /
• 2009

In this paper, we analyze the active RFID systems ISO/IEC 18000-7 and ISO/IEC 18000-4. In order to improve the coverage in sensor networks, which consist active RFID tag, we propose RFID multi-hop relay system using active RFID relay tag. To compare the performance between the existing ISO/IEC 18000-7 system and the proposed RFID multi-hop relay system, we introduce new system efficiency measure and sensitivity-based measure of achieved coverage. Also, we analyze the performance of the proposed system and compare it with that of the existing system through MCL (Minimum Coupling Loss) analysis and SLS (System Level Simulation) analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.87-95
• /
• 2013

In this paper, the outage probability of efficient partial relay selection(EPRS) using only one-hop channel information in multi-hop systems is analyzed in Rayleigh fading channels. In particular, we derive an exact and closed-form expression for the outage probability of decode-and-forward relaying based EPRS. In order to prove the usefulness of EPRS in multi-hop systems, we also analyze the correlation between the end-to-end signal-to-noise ratio(SNR) and the SNR for each hop at an arbitrary relaying path. Furthermore, through numerical investigation, we compare the outage performances for EPRS and the best relay selection using all channel information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.325-338
• /
• 2012

In this paper, a radio resource allocation scheme for a multi-hop relay transmission in cognitive radio (CR) system is proposed to support the employment of relay nodes in IEEE 802.22 standard for wireless regional area network (WRAN). An optimization problem is formulated to maximize the number of serving secondary users (SUs) under system constraints such as time-divided frame structure for multiplexing and a single resource-unit to every relay-hop. However, due to mathematical complexity, the optimization problem is solved with a sub-optimal manner instead, which takes three steps in the order of user selection, relay/path selection, and frequency selection. In the numerical analysis, this proposed solution is evaluated in terms of service rate denoting as the ratio of the number of serving SUs to the number of service-requesting SUs. Simulation results show the condition of adopting multi-hop relay and the optimum number of relaying hops by comparing with the performance of 1-hop system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.584-591
• /
• 2010

In this paper, we propose an adaptive Relay Station (RS) coverage extension scheme for the Mobile Multi-hop Relay (MMR) systems. The MMR system with a non-transparent mode RS can be used to extend BS coverage using the remaining capacity of the Base Station(BS). Thus, the call blocking may occur in RSs when calls arrive very often in Multi-hop Relay Base Station (MR-BS). In the proposed scheme, RSs can be connected to the neighbor MMR system as the 2ndtier RSs if the neighbor MMR system services low traffic load when calls are frequently arrived in MR-BS or RSs. By doing so, the MMR system can accept a new call without call blocking. Through numerical results, we demonstrate that the proposed scheme outperforms the conventional MMR system in terms of the throughput and call blocking probability of MMR systems.

• Journal of information and communication convergence engineering
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2014

In multi-hop communication systems, two-way relaying is one of the solutions to mitigate the spectral efficiency loss caused by a half-duplex transmission. In this paper, a simple two-way relaying scheme is proposed for two-hop two-user multiple input multiple output (MIMO) systems. In the proposed system, a base station and a relay station (RS), both equipped with two antennas, form a point-to-point MIMO channel, while the RS and two single-antenna mobile users form a point-to-multipoint multiuser (MU)-MIMO channel. Numerical examples show that the proposed system achieves a significant sum rate gain as compared to a one-way relaying system as the distance between a relay and the two users decreases. We also show that although we can expand the proposed scheme to more than two users, its performance gain as compared to that of one-way relaying decreases with an increase in the number of users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.12
• /
• pp.4967-4986
• /
• 2015

Multi-hop relaying communications have great potentials in improving transmission performance by deploying relay nodes. The benefit is critically dependent on the accuracy of the channel state information (CSI) of all the transmitting links. However, the CSI has to be estimated. In this paper, we investigate the channel estimation problem in one-way multi-hop MIMO amplify-and-forward (AF) relay system, where both the two-hop and three-hop communication link exist. Traditional point-to-point MIMO channel estimation methods will result in error propagation in estimating relay links, and separately tackling the channel estimation issue of each link will lose the gain as part of channel matrices involved in multiple communication links. In order to exploit all the available gains, we develop a novel channel estimation model by structuring different communication links using the PARAFAC and PARATUCK2 tensor analysis. Furthermore, a two-stage fitting algorithm is derived to estimate all the channel matrices involved in the communication process. In particular, essential uniqueness is further discussed. Simulation results demonstrate the advantage and effectiveness of the proposed channel estimator.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1679-1685
• /
• 2022

In this paper, we propose an optimal multi-hop transmission scheme to maximize the end-to-end data rate from the source to the destination node in a wireless powered communication network. The frame structure for multi-hop transmission is presented to transmit multi-hop data while harvesting energy. Then, the transmission time of each node that maximizes the end-to-end transmission rate is determined through mathematical analysis in consideration of different harvested energy and link quality among nodes. We derive an optimization problem through system modeling of the considered wireless powered multi-hop transmission, and prove that there is a global optimal solution by verifying the convexity of this optimization problem. This analysis facilitates to find the optimal solution of the considered optimization problem. The proposed optimal multi-hop transmission scheme maximizes the end-to-end rate by allocating the transmission time for each node that equalizes the transmission rates of all links.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.465-468
• /
• 2007

An intelligent home network system using low-power and low-cost sensor nodes was designed and implemented. In Intelligent Home Network System, active home appliances control is composed of RSSI (Received Signal Strength Indicator) based user indoor location tracking, dynamic multi-hop routing, and learning integration remote-control. Through the remote-control learning, home appliances can be controlled in wireless network environment. User location information for intelligent service is calculated using RSSI based Triangle measurement method, and then the received location information is passed to Smoothing Algorithm to reduce error rate. In order to service Intelligent Home Network, moreover, the sensor node is designed to be held by user. The gathered user data is transmitted through dynamic multi-hop routing to server, and real-time user location & environment information are displayed on monitoring program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.853-866
• /
• 2008

In this paper, a multi-hop relaying transmission scheme is analyzed regarding its feasibility and potentiality in the IEEE 802.22-based cognitive radio (CR) environment. Shortly, basic design issues are addressed such as relay station (RS) deployment and a frame structure of physical channel to escape inter-hop interference. This paper mainly develops a radio resource management scheme based on spectrum sensing results aggregated from CR secondary nodes and improves the opportunistic spectrum sharing efficiency. In particular, a decision rule about a channel availability is made using a distributed sensing method. Subsequently, spectrum allocation and routing path decision procedures are proposed to establish a link from source to destination with a hop-by-hop manner. Simulation results show that the proposed multi-hop relaying scheme is substantially profitable in CR environments if the number of hops and RS deployment are designed in such a way that the spectrum sharing gain is larger than spectrum division loss which is inherently induced in multi-hop relaying systems.