• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1032-1037
• /
• 2003

Although the holes on the shell case are very important fer the acoustic performance, it is difficult to solve the problem because the case includes thin bodies. Hence, in the past, only the method of trial and error, which depends on the engineer's intuition and experience, was available fur the design of holes. Many researchers have tried to solve the thin-body acoustic problems, since the conventional boundary element method (BEM ) using the Helmholtz integral equation fails to yield a reliable solution fer the numerical modelling of radiation anti scattering of sound from thin bodies. In the area of the analysis of thin-body acoustic problem, three approaches are generally used; the multi-domain BEM, the indirect variational BEM, and the normal derivative integral equation And there has been just a f9w study reported on the design optimization for the acoustic radiation problems by using only the conventional BEM. For the thin-body acoustics, however, no further study in the optimization fields has been reported. In this research, the normal derivative integral equation is adopted as an analysis formulation in the thin-body acoustics, and then used fur the optimization. The analytical approaches for the design of holes are proposed by using a topology optimization technique and a genetic algorithm. The proposed approaches are implemented and validated using numerical examples.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.88-93
• /
• 2012

This paper describes the machinability of the sintered carbide and tool-die steel(STD-11) by electric discharge drilling with various tubular electrodes which have multi-holes. Various types of electrode which have different diameters and materials are used with the application of continuous direct current and axial electrode feed. Inner part of electrodes are inserted with smaller tubes or Y-channel or bar. In ED-Drilling, the dielectric flushed down the interior of the rotating tube electrode, in order to remove machining debris from the hole. As result of experiments, the bigger the diameter of the electrode is, the lower the material removal rate is. Machinability of copper electrode is higher than that of brass. In machining of sintered carbide, to use oil is better than distilled water as dielectric.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1509-1516
• /
• 2004

During fuel irradiation tests, all parts of cylindrical structure with multiple holes act as heat sources due to fussion heat and ${\gamma}$-flux. The high temperature is especially generated in the center of pellet. Because of the high temperature, many problems occur, such as melting of pellet and declining of heat transfer between cladding and coolant. In this paper, it is attempted to minimize the temperature of pellet using optimization method. For thermal and optimization analysis of structure, the finite element method code, ANSYS 5.7 is used. Through the optimum design process, the temperature of SBT diminished 10％ and the temperature of OBT diminished 18％.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.13-19
• /
• 2004

본 논문은 wireless LAN 주파수 대역 (5725∼5825 MHz)에서의 다차원패턴기술(Photonic Band Gap : PBG)을 이용한 Yagi-Uda 안테나와 결합하여 광대역 마이크로스트립 패치 안테나를 구현하였으며, PBG Cell을 이용한 안테나와 이용하지 않은 안테나를 비교 분석하였다. PBG 구조를 적용한 안테나에서의 대역폭이 약 30 MHz 정도 더 넓게 나왔으며, 안테나의 이득 또한 1dB정도 더 높게 나왔는데 이는 Ground 면에 2차원적인 다차원 패턴 구조를 적용하여 안테나 표면을 따라 전파하는 전자파의 전송이 억제되도록 표면파의 발생을 효과적으로 차단했기 때문으로 분석된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.367.1-367
• /
• 2002

Recently, the noise environmental issue in compound residential areas like apartments becomes a very critical factor fer the building designers. In order to satisfy the customer need to live in a quiet environment, several interior structures for buildings are being introduced. The multi-layered composite floor plate is one of them. This structure is designed to prevent the noise generated by an object collision. (omitted)

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.263-268
• /
• 1999

The most important things to the tube the of the heat exchanger are the precision of t hole position and the quality of the drill face. Nowadays, 6 and 12 spindle multi-drilling machine controlled by CNC or used to drill holes of the tube sheet. The drilling of 12 axes can offer high speover three times as fast as the drilling of axis. However, the drilling of 12 axes h difficulty in controlling many motors to d spindles and assigning a corresponded numbe accurately to each axis. In the past, conventional method to inspect the code the drilling was machining holes on a thin plate previously which resulted in the productivity because it required a h production cost by machining and weldin time. In this thesis, there are two drilling codes different from CNC code. M code is used to control many motors and S code is used to assign a correspondent number for each axis. For increasing the productivity by removing process, this paper is intended to take simulation of the drill machining c including 6 and 12 axis on the persona computer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1202-1204
• /
• 2006

Various types of perforated sheets have been applied on the surface of porous absorptive materials in order to protect dust and to enhance interior design. This study examines experimentally influences on absorptive characteristics according to the shape of perforation which includes rectangular and resonator type as well as circular holes. The measured results shows that the resonance frequency can be changed by the shape of perforation as well as the eccentricity of holes.

• 천문학회보
• /
• 제41권1호
• /
• pp.31.3-31.3
• /
• 2016

Exploring a universe with gravitational waves (GWs) was only theoretical expectation for long time. In September 2015, the Laser Interferometer GW Observatory (LIGO) first detected GWs emitted from the collision of two stellar-mass black holes in cosmological distance (1.3 billion light years) on Earth. This confirms the existence of black-hole binary mergers, and further, opens a new field of GW astronomy. We begin our discussion with a list of important GW sources that can be detectable on Earth by large-scale laser interferometers such as LIGO. Focusing on compact objects such as neutron stars and black holes, we then discuss possible research in the context of GW astronomy. By coordinating with existing observatories, searching for electromagnetic waves or particles from astronomical objects, around the world, multi-messenger astronomy for the universe's most cataclysmic phenomena (e.g. gamma-ray bursts) will be available in the near future.

• 천문학회보
• /
• 제35권1호
• /
• pp.27.2-27.2
• /
• 2010

We have studied the formation of coronal holes (CHs) associated with halo CMEs. For this study, we used multi-wavelength data from Yohkoh Soft X-ray Telescope (SXT), GOES Soft X-ray Imager (SXI), SOHO EIT 195 ${\AA}$, SOHO MDI magnetogram, MLSO He I 10830 ${\AA}$, and BBSO H-alpha. The CHs are characterized by open magentic field regions with low emission, density, and temperature and their open fields drive high speed solar winds which cause geomagnetic storms. So far, the formation and the evolution of CHs are not well understood. The formation of the dark region associated with the eruption of a CME is well known as "coronal dimming" which may be caused by the mass depletion near the CME footpoint. It is different from a typical CH since it persists for only one or two days. In this study, we present three cases that show the formation of coronal holes which are associated with three halo CMEs: 1) 2000 Jul 14, 2) 2003 Oct 28, 3) 2005 May 13. In the first case, hot plasma was ejected during a weak eruption and then filled out the pre-existing CH. After the halo CME occurred, the hot plasma region becomes a CH again. In the second and the third cases, we found newly formed CHs just after their associated CMEs. All three coronal holes are associated with strong flares and persist over 3 days until they disappeared by the solar rotation. Examining the MDI magnetograms, we found that the magnetic polarity of each CH region has one polarity. Based on these results, we suggest that the coronal holes can be formed by the CMEs and they should be distinguished from the coronal dimming.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.1-5
• /
• 2004

다층 연성기판은 높은 전기 전도성과 낮은 절연상수로 잘 알려진 구리와 폴리이미드로 구성되어 있다. 본 연구에서는 이러한 다층연성기판을 패턴된 스테인리스 스틸 위에 구리선을 전기도금하고 폴리이미드를 코팅함에 의해서 균일한 형태의 $5{\mu}m$-pitch의 전도선을 제조하는데 성공하였다. 또한, 다층기판 형성시 비아흘은 UV 레이저로 형성시켰으며 구리와 주석을 전기 도금함으로 이를 채웠다. 그런다음 비아와 전도선이 붙은 채로 스테인리스 스틸에서 벗겨냈다. 이렇게 형성된 각각의 층을 한번에 적층하여 다층연성기판을 완성하였다. 적층시 주석과 구리사이에 고체상태 반응(Solid state reaction)이 발생하여 $Cu_6Sn_5$ and $Cu_3Sn$을 형성하였으며 비아패드에 비아가 수직으로 위치한 완전한 형태의 층간 연결을 형성하였다. 이러한 비아 형성 공정은 V형태의 비아나 페이스트 비아와 비교할 때 좋은 전기적 특성, 저가공정등의 여러 장점을 가지고 있다.