• 분석과학
• /
• 제17권5호
• /
• pp.434-437
• /
• 2004

Alpha track technology can provide useful isotopic information of boron in the primary coolant water. In the quantitative analysis using the alpha track analysis, the shape or area of sample on the solid track detector becomes very important, especially for the analysis of liquid samples. In this research, a multi-dot plate has been developed for this purpose. The multi-dot plate provides fixed standard shape of the sample solution that stays inside of the printed circle, and consequently increases the reproducibility of the boron analysis.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.43-55
• /
• 1994

To investigate relations between Grain-shape of plate and Dot-Gain in the lithography, Printing plates were made by Mechanical Grain, Brush Grain and Electrolytic Grain method.Fine multi-grain by electrolytic method of them resulted in less Dot-grain on the paper, more damping water on the none image part of printing plate.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1609-1612
• /
• 2006

The determination of the boron isotopic ratio in solutions was achieved by means of a solid state track detector by using an alpha track. The neutron flux was optimized by using a Cd-foil to find the optimum conditions for counting the number of alpha tracks on the selected solid detector caused by the (n, $\alpha$) nuclear reaction of boron. The home-made multi-dot detector plate was utilized in this study to increase the reproducibility of the measurement by uniformly drying the boron solution within the marked circle area on the detector plate. The experimental results of this study verified that the $^{11}B/^{10}B $ isotopic ratio can be measured by observing the number of alpha tracks for different concentrated standard solutions with various isotopic compositions. This technique was applied to the determination of $^{10}B$ enrichment factor in a biological sample for a boron neutron capture therapy.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.667-673
• /
• 2015

레이져 다이오드(이하 LD)는 현재 의료용, 산업용 가공, 센서, 광고용기기, 인쇄장비 등등 많은 분야에서 연구되고 실제 산업현장에서 적용되어 사용되고 있다. 하지만 정밀한 취급이 요구되는 LD의 민감한 특성상 그 효용성에 비해서 실제 사용은 전문분야에 국한되어진다. 본 논문에서는 LD가 가지는 정전기, 전류, 열, 물리적 충격 등에 대한 민감한 특성을 고려하여, 다양한 파장대의 LD를 안정적으로 드라이빙 할 수 있는 샘플 모듈을 직접 제작해보고, 더 나아가 하나의 LD가 아닌 다수(다채널)의 LD 제어를 인쇄용 CTP(Computer To Plate) 장비를 통해 연구해 본다. 특히 현 CTP장비의 다채널 제어가 64채널에 한정되어 있음을 착안해, 이의 두 배인 128채널의 LD 제어를 목표로 하고, 이때 발생하는 시작점의 LD와 끝점의 LD 사이의 망점 간의 딜레이 문제점에 대한 해결 방안을 제시하고, 또한 실제 CTP 장비에 장착한 후 인쇄 속도와 해상도를 비교하여 128채널 LD 제어의 효율을 비교해본 후, 마지막으로 256채널 LD 제어의 가능성을 검토해본다.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.16-23
• /
• 2004

Thermally induced errors of machine tools have been recognized as one of the most important issues in precision machining. This is probably the most formidable obstacle to obtain high level of machining accuracy. To this regard, the experimental compensation methodologies such as software-based method or origin shift of machine tool axes have been suggested. In this research, to cope with thermal deformation, a model based correction was carried out with the function of an external machine coordinate shift. Models with multi-linear regression or neural network were investigated to selected a good one for thermal compensation. Consequently, multi-linear regression model combined with origin shift was verified good enough form the machining of dot matrices of plate with ball end milling.