• 대한전자공학회논문지TC
• /
• 제45권7호
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC)는 최근 우수한 성능으로 통신 분야에서 채널 코딩의 중요한 블록으로 주목받고 있다. 그리하여 Wibro를 포함한 여러 표준에서 LDPC 부호를 채널 코딩으로 채택하고 있다. 이러한 LDPC 부호의 Encoder를 구현하는데 있어서의 약점은 기존의 이진 Matrix Vector Multiplier가 throughput의 감소의 원인이 되는 clock cycle이 많다는 것이다. 본 논문은 표준에서 사용되는 H 행렬이 Circulant Permutation Matrix(CPM)로 정의되어 있다는 점을 이용하여 인코더의 구현에 있어서 기존의 Matrix Vector Multiplier 대신에 cyclic shift register와 exclusive-OR을 사용하는 설계구조를 제안한다. 또한, 제안한 구조를 이용하여 WiBro에 포함되는 다양한 부호율에 적용가능한 인코더를 설계하였다. 제안된 WiBro LDPC의 인코더는 기존보다 적은 clock cycle을 가지므로 높은 throughput에 도달한다.

• 전자공학회논문지C
• /
• 제34C권9호
• /
• pp.10-21
• /
• 1997

In this paper, we propose multiple instruction issuable multi-streaming as a processor architecture for 3D graphics processor. Multistreaming can eliminate inteferences within concurrently executing instructions inthe pipelined processor to allow enough parallelism for parallel processing. Through cycle level simulation study, we show that the proposed architecture outperforms a conventional RISC processor, MIPS R3000 by three times with reasonable resource overheads. Multiple instruction issuable multistreaming processor will be a bood architecture for instruction processor when a large number of threads are guaranteed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.146-156
• /
• 2020

Two High Tensile Strength Steel (EH47) plates with thickness of 70 mm were butt-welded together by multi-pass Submerged Arc Welding (SAW), also the hardness and welding residual stress were investigated experimentally. Based on Thermal-Elastic-Plastic Finite Element (TEP FE) computation, the thermal cycles during entire welding process were obtained, and the HAZ hardness of multi-pass butt welded joint was computed by the hardenability algorithm with considering microstructure evolution. Good agreement of HAZ hardness between the measurement and computational result is observed. The evolution of each phase was drawn to clarify the influence mechanism of thermal cycle on HAZ hardness. Welding residual stress was predicted with considering mechanical response, which was dominantly determined by last cap welds through analyzing its formation process.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.223-230
• /
• 2003

Generally, the life-span of a multi-housing complex is over 50 years, but in reality they are usually demolished after 20 years in spite of its remaining life expectancy. Thus, this research focuses on the estimation of the optimum economic life-span of a multi-housing complex. To estimate the minimum total cost point of start to finish of a multi-housing complex, we'll apply MAPI(Machinery and Allied Product Institute) and LCC(Life Cycle Cost) theory.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.68-78
• /
• 2012

A layout of an LNG FPSO should be elaborately determined as compared with that of an onshore plant because many topside process systems are installed on the limited area; the deck of the LNG FPSO. Especially, the layout should be made as multi-deck, not single-deck and have a minimum area. In this study, a multi-floor layout for the liquefaction process, the dual mixed refrigerant(DMR) cycle, of LNG FPSO was determined by using the optimization technique. For this, an optimization problem for the multi-floor layout was mathematically formulated. The problem consists of 589 design variables representing the positions of topside process systems, 125 equality constraints and 2,315 inequality constraints representing limitations on the layout of them, and an objective function representing the total layout cost. To solve the problem, a hybrid optimization method that consists of the genetic algorithm(GA) and sequential quadratic programming(SQP) was used in this study. As a result, we can obtain a multi-floor layout for the liquefaction process of the LNG FPSO which satisfies all constraints related to limitations on the layout.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.34-42
• /
• 2014

본 논문에서는 두 개의 공간 스트림을 갖는 multiple-input multiple-output 시스템을 위한 modified maximum-likelihood 심볼 검파 알고리즘 기반의 저 복잡도 고 성능의 심볼 검파기의 구조를 제시하고 이를 구현한 결과를 보인다. 제안하는 심볼 검파기에서는 비용함수 계산 과정에서의 각 심볼 별로 병렬적으로 계산되던 곱셈 연산을 멀티 사이클 기반의 점증적인 덧셈 연산으로 대체하였다. 또한 양자화 과정을 파이프 라인 구조를 적용하여 성상의 범위에 따라 단계적으로 수행할 수 있게 구현하였다. 그 결과 제안하는 심볼 검파기는 256 QAM과 같이 복잡한 변조 방식을 지원하면서도 하드웨어 복잡도가 낮다. 양자화 과정의 파이프 라인을 재구성함으로써 여러 변조 방식과 안테나 환경에서의 심볼 검파를 유연하게 지원한다. 설계된 심볼 검파기는 $0.11-{\mu}m$ CMOS 공정의 라이브러리를 사용하여 최대 478 MHz의 동작주파수에서 38.7K의 논리 게이트로 구현되어 16 QAM에서 166Mbps, 64 QAM에서 80 Mbps의 처리량을 달성한다.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.103-111
• /
• 2023

The caving property of top coal is a key factor to the success of top coal caving mining. The influence law of cyclic loading and unloading of hydraulic support on top coal caving is of great significance to improve the recovery rate of top coal. The similar simulation methods were used to study the dynamic evolution of the top coal cracks under the multi-cycle action of the support, and the parameters of top coal cracks were analyzed quantitatively in this paper. The results show that the top coal cracks can be divided into horizontal cracks and vertical cracks under the cyclic loading and unloading of the support. With the increase of the times of the support cycles loading and unloading, the load on the support decreases, the fractal dimension of the cracks increases, the number and total length of the top coal cracks increases, and the top coal caving is getting better. With the increase of the times of multi-cycle loading and unloading, the fractal dimension, total crack length and crack rate of top coal show a trend of rapid increase first and then increase slowly. Both the total length of the top coal cracks and the crack rate basically show linear growth with the change of the fractal dimension. The top coal caving can be well improved and the coal resource recovery rate increased through the multi-cycle loading and unloading.

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 한국농촌건축학회논문집
• /
• 제13권1호
• /
• pp.45-54
• /
• 2011

The results of examining the architectural features and changes of the main building of Dogapsa temple which is multi roofs wooden structure are as follows. The passage comparing 'Dogapsa' of <>, account of Lee Ha Gon's trip as the literature showing the appearance of Dogapsa temple in the early 18th century to Borimsa through verse of 'Dutacho' was noticeable. Dogapsa temple at Yeongam was distant over 100 ri from Borimsa temple at Jangheung and it was considered that there were many temples at Mt. Wolchul, Yeongam and there were also many temples to be comparable with it. But, Dogapsa temple was compared to Borimsa temple because verses 'many-storied building is high and immense' of 'Dogapsa' at <> and 'Dogapsa is lower than Borimsa at Jangheung' at 'Dutacho' of <> were interpreted as the existence of multi roofs Buddhist temple which had something in common with Dogapsa and Borimsa and was comparable to them. According to existing materials, it was assumed that the main building of Dogapsa was burnt through the Japanese invasion of Korea in the 52nd year of the sexagenary cycle (Eulmyooebyeon, 1555) and Jungyujaeran (1597), but record of major history of the main buildings of Dogapsa and Borimsa indicated that multi roofs wooden structure of the two temples were built at the same period. Since multi roofs wooden structure of main building of Borimsa was rebuilt in 1692, these buildings existed from the early 18th century to middle 18th century.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.677-691
• /
• 2022

Water cycle algorithm (WCA) has been a very effective optimization technique for complex engineering problems. This study employs the WCA for simultaneous prediction of heating load (L_H) and cooling load (L_C) in residential buildings. This algorithm is responsible for optimally tuning a neural network (NN). Utilizing 614 records, the behavior of the L_H and L_C is explored and the captured knowledge is then used to predict for 154 unanalyzed building conditions. Since the WCA is a population-based algorithm, different numbers of the searching agents were tested to find the most optimum configuration. It was observed that the best solution is discovered by 500 agents. A comparison with five newly-developed benchmark optimizers, namely equilibrium optimizer (EO), multi-tracker optimization algorithm (MTOA), slime mould algorithm (SMA), multi-verse optimizer (MVO), and electromagnetic field optimization (EFO) revealed that the WCANN predicts the desired parameters with considerably larger accuracy. Obtained root mean square errors (1.4866, 2.1296, 2.8279, 2.5727, 2.5337, and 2.3029 for the L_H and 2.1767, 2.6459, 3.1821, 2.9732, 2.9616, and 2.6890 for the L_C) indicated that the most reliable prediction was presented by the proposed model. The EFONN, however, provided a more time-effective solution. Lastly, an explicit predictive formula was elicited from the WCANN.