• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.396-403
• /
• 2013

Recently, GNSS users can utilize various navigation satellite thanks to GPS modernization, renewal of GLONASS, and development of Galileo and Beidou. And availability performance of users is expected to be improved because these new navigation satellites transmit L5 signal as well as L1 signal, and users can directly estimate the ionospheric delays. In accordance with these changes existing Satellite Based Augmentation System (SBAS) which considers only GPS L1 signal is being developed to support dual frequency and multi-constellation GNSS users. This paper describes the main features of dual-frequency, multi-constellation SBAS algorithms and estimates the performance in Korean region by simulation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.260-267
• /
• 2014

For the purpose of improving the accuracy of Wide Area Differential GNSS (WA-DGNSS), estimation performance of ionospheric delay error which has a great impact on GPS error sources should be enhanced. This paper applied multi-constellation GNSS which represents GPS in USA, GLONASS in Russia, and Galileo in Europe to WA-DGNSS algorithm in order to improve performance of ionospheric delay estimation. Furthermore, we conducted simulation to analyze ionospheric delay estimation performance in Korean region by increasing the number of reference stations. Consequently, using multi-constellation GNSS to improve performance of ionospheric delay estimation is more effective than increasing the number of reference stations in spite of similar number of measurements which are in use for estimation. We expect this result can contribute to improvement for ionospheric delay estimation performance of single-frequency SBAS (Satellite Based Augmentation System) user.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.181-191
• /
• 2016

A Satellite Based Augmentation System (SBAS) provides differential correction and integrity information through geostationary satellite to users in order to reduce Global Navigation Satellite System (GNSS)-related errors such as ionospheric delay and tropospheric delay, and satellite orbit and clock errors and calculate a protection level of the calculated location. A SBAS is a system, which has been set as an international standard by the International Civilian Aviation Organization (ICAO) to be utilized for safe operation of aircrafts. Currently, the Wide Area Augmentation System (WAAS) in the USA, the European Geostationary Navigation Overlay Service (EGNOS) in Europe, MTSAT Satellite Augmentation System (MSAS) in Japan, and GPS-Aided Geo Augmented Navigation (GAGAN) are operated. The System for Differential Correction and Monitoring (SDCM) in Russia is now under construction and testing. All SBASs that are currently under operation including the WAAS in the USA provide correction and integrity information about the Global Positioning System (GPS) whereas the SDCM in Russia that started SBAS-related test services in Russia in recent years provides correction and integrity information about not only the GPS but also the GLONASS. Currently, LUCH-5A(PRN 140), LUCH-5B(PRN 125), and LUCH-5V(PRN 141) are assigned and used as geostationary satellites for the SDCM. Among them, PRN 140 satellite is now broadcasting SBAS test messages for SDCM test services. In particular, since messages broadcast by PRN 140 satellite are received in Korea as well, performance analysis on GPS/GLONASS Multi-Constellation SBAS using the SDCM can be possible. The present paper generated correction and integrity information about GPS and GLONASS using SDCM messages broadcast by the PRN 140 satellite, and performed analysis on GPS/GLONASS Multi-Constellation SBAS performance and APV-I availability by applying GPS and GLONASS observation data received from multiple reference stations, which were operated in the National Geographic Information Institute (NGII) for performance analysis on GPS/GLONASS Multi-Constellation SBAS according to user locations inside South Korea utilizing the above-calculated information.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1260-1283
• /
• 2019

Low earth orbit (LEO) satellite broadband network is a crucial part of the space information network. LEO satellite constellation design is a top-level design, which plays a decisive role in the overall performance of the LEO satellite network. However, the existing works on constellation design mainly focus on the coverage criterion and rarely take network performance into the design process. In this article, we develop a unified framework for constellation optimization design in LEO satellite broadband networks. Several design criteria including network performance and coverage capability are combined into the design process. Firstly, the quality of service (QoS) metrics is presented to evaluate the performance of the LEO satellite broadband network. Also, we propose a network stability model for the rapid change of the satellite network topology. Besides, a mathematical model of constellation optimization design is formulated by considering the network cost-efficiency and stability. Then, an optimization algorithm based on non-dominated sorting genetic algorithm-II (NSGA-II) is provided for the problem of constellation design. Finally, the proposed method is further evaluated through numerical simulations. Simulation results validate the proposed method and show that it is an efficient and effective approach for solving the problem of constellation design in LEO satellite broadband networks.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, the recently launched GNSS satellites transmit signals at various frequency bands of L1, L2 and L5. Considering the Korea Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. In this paper, we introduce a multi-constellation (GPS/Galileo/BeiDou) multi-band (L1/L2/L5) SDR by utilizing Ettus USRP N210. The signal reception module of the developed SDR includes down-conversion, analog-to-digital conversion, signal acquisition, and tracking. The down-conversion module is designed based on the super-heterodyne method fitted for MHz sampling. The signal acquisition module performs PRN code generation and FFT operation and the signal tracking module implements delay/phase/frequency locked loops only by software. In general, it is difficult to sample entire main lobe components of L5 band signals due to their higher chipping rate compared with L1 and L2 band signals. Experiment result shows that it is possible to acquire and track the under-sampled signals by the developed SDR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.217-225
• /
• 2009

Tone injection scheme has been known as one of peak to average power ratio (PAPR) reduction methods deployable to multi-carrier system like orthogonal frequency division multiplexing (OFDM). The basic idea in tone injection scheme is to enforce the constellation size larger so that each of original constellation points is mapped into the preassigned distinct locations. According to the tone injection scheme, it increases symbol power highly induced inherently by expanding constellation to get optimal PAPR reduction. In the other hand, to get optimal power increase, the PAPR would be reduced insufficiently with limited tone injection signal. To withstand these problems, this paper consider the reduction of the PAPR and power increase problem simultaneously, Toward this, the tone injection scheme accomplished by employing the weighted sum genetic algorithm which has been utilized to solve multi-objective optimization problem (MOOP). The simulation results verifies that the proposed scheme can control the effective PAPR performance and alleviation of power increase flexibly by the weight value at the expense of relatively low complexity.

• Journal of Space Technology and Applications
• /
• v.1 no.2
• /
• pp.256-267
• /
• 2021

In this paper, the New Space characteristics and response of micro & small satellite, and space industrialization strategy using domestic technologies are described. Recently, micro & small satellites are developed worldwide, including Starlink, having the characteristics of low-cost, light-weight and satellite constellation. Therefore, it is necessary to prepare for the constellation operation by considering the use of Commercial Off-The-Shelf (COTS) parts, satellite weight, shape and mass production. In particular, it is necessary to develop Multi Input Multi Output (MIMO) technology in consideration of the frequency interference during constellation operation, and to prepare and make efforts to secure frequencies in the government. Among the commercial-grade memories of Samsung Electronics and SK Hynix, the space-grade memory field using radiation tolerant memory and the high reliable packaging and space environment test technology has potential as a space industrialization strategy.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.259-264
• /
• 2006

Using M-ary QAM and PSK, various modulation methods are researched so far. In this paper, a new constellation method of $4L^2$-PSK that normalized circular multi-layer method is proposed with the advantage of those modulation methods. These replacements of signal points complement weak points of an nonlinear radius increment as a layer increases in M-ary QAM and a low efficiency in PSK compared with QAM. But, $4L^2$-PSK have some problems that in the power efficiency and difference of BER in each layer, So in this paper suggest that advanced $4L^2$-PSK also.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.10-22
• /
• 2022

According to the Space Development Promotion Basic Plan, more than 110 satellites are expected to be deployed by 2031. Accordingly, the operation concept and technology for satellites constellation are required, compared to the existing few multi-satellite operations. It is essential to automate and optimize the mission operation system, for efficient operation of the satellite constellation, and preparations are urgently needed for the operation of satellite constellation in domestic as well. In this study, the development direction and strategy of the mission operation system applying automation and optimization for efficient operation of the satellite constellation are proposed. The framework for evaluating the automation level and priority of the mission operation system was developed, to identify the tasks to which automation should be applied preferentially.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.315-333
• /
• 2021

Due to the Global Navigation Satellite System (GNSS) modernization, recently launched GNSS satellites transmit signals at various frequency bands such as L1, L2 and L5. Considering the Korean Positioning System (KPS) signal and other GNSS augmentation signals in the future, there is a high probability of applying more complex communication techniques to the new GNSS signals. For the reason, GNSS receivers based on flexible Software Defined Radio (SDR) concept needs to be developed to evaluate various experimental communication techniques by accessing each signal processing module in detail. This paper proposes a novel SDR-based A-GNSS receiver capable of processing multi-GNSS/RNSS signals at multi-frequency bands. Due to the modular structure, the proposed receiver has high flexibility and expandability. For real-time implementation, A-GNSS server software is designed to provide immediate delivery of satellite ephemeris data on demand. Due to the sampling bandwidth limitation of RF front-ends, multiple SDRs are considered to process the multi-GNSS/RNSS multi-frequency signals simultaneously. To avoid the overflow problem of sampled RF data, an efficient memory buffer management strategy was considered. To collect and process the multi-GNSS/RNSS multi-frequency signals in real-time, the proposed SDR A-GNSS receiver utilizes multiple threads implemented on a CPU and multiple NVIDIA CUDA GPGPUs for parallel processing. To evaluate the performance of the proposed SDR A-GNSS receiver, several experiments were performed with field collected data. By the experiments, it was shown that A-GNSS requirements can be satisfied sufficiently utilizing only milliseconds samples. The continuous signal tracking performance was also confirmed with the hundreds of milliseconds data for multi-GNSS/RNSS multi-frequency signals and with the ten-seconds data for multi-GNSS/RNSS single-frequency signals.