• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
• /
• pp.196-198
• /
• 2003

Virtually every digital signal processors(DSPs) support on-chip multi- memory banks that allow the processor to access multiple words of data from memory in a single instruction cycle. Also, all existing fixed-point DSPs have irregular architecture of heterogeneous register which contains multiple register files that are distributed and dedicated to different sets of instructions. Although there have been several studies conducted to efficiently assign data to multi-memory banks, most of them assumed processors with relatively simple, homogeneous general-purpose resisters. Therefore, several vendor-provided compilers fer DSPs were unable to efficiently assign data to multiple data memory banks. thereby often failing to generate highly optimized code fer their machines. This paper presents an algorithm that helps the compiler to efficiently assign data to multi- memory banks. Our algorithm differs from previous work in that it assigns variables to memory banks in separate, decoupled code generation phases, instead of a single, tightly-coupled phase. The experimental results have revealed that our decoupled algorithm greatly simplifies our code generation process; thus our compiler runs extremely fast, yet generates target code that is comparable In quality to the code generated by a coupled approach

• 한국통신학회논문지
• /
• 제29권6A호
• /
• pp.600-606
• /
• 2004

본 논문에서는 인터리빙 딜레이 다이버시터 기법을 제안하고 이를 다중 코드 WCDMA 시스템에 적용한다. 제안 시스템에서의 딜레이 다이버시터 기법은 인터리빙 기법을 적용하여 잡음과 페이딩의 영향을 감쇄시켜 시스템 성능을 개선하고 인터리빙된 신호와 인터리빙 되지 않은 신호를 서로 다른 시간 간격을 두어 전송시켜 시간 다이버시터 이득을 얻으며 송신단에서 우너신호의 재전송 횟수를 적절히 증가시킴에 따라 수신 다이버시터이득을 효과적으로 얻을 수 있도록 한다. 또한 다수의 안테나 중 채널 상황이 좋은 안테나만을 선택하여 신호를 전송하는 안테나 선택 기법을 적용하여 제한된 전력을 효율적으로 사용하는 기법을 제안하였다. 컴퓨터 시뮬레이션을 통해 제안된 시스템이 기존 시스템에 비해 2dB 이상의 성능개선을 나타냄을 확인하였다.

• 한국음향학회지
• /
• 제21권7호
• /
• pp.648-655
• /
• 2002

본 논문에서는 고성능 범용 DSP (Digital Signal Processor)를 이용하여 멀티미디어 통신 등에 널리 사용되고 있는 G.723.1 Annex A (G.723.1A)의 다채널 구현에 관해 기술한다. 다채널 구현을 위해서 G.723.1의 알고리듬과 ITU-T(International Telecommunication Union-Telecommunication)에서 제공된 정수 연산 C 코드의 모듈별 계산량을 분석한 후, 이를 기준으로 C코드를 최적화한다. 각 모듈의 최적화 과정은 ITU-T에서 제공되는 시험벡터를 이용한 검증과 병행한다. 최적화 된 코드의 성능을 측정한 결과, 200㎒ TMS320C62x에서 내부 메모리만을 사용하여 5.3/6.3 kbps 두 가지 전송률에 대해서 부호화기와 복화화기를 동시에 17 채널을 수용하였다. 또한 비트-호환 버전의 경우에는 고속 코드북 검색 알고리듬을 도입하여 음질을 유지하면서 22 채널을 수용하였다.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.433-439
• /
• 2010

This paper proposes a beacon color code scheduling algorithm for the localization of multiple robots in a multi-block workspace. With the developments of intelligent robotics and ubiquitous technology, service robots are applicable for the wide area such as airports and train stations where multiple indoor GPS systems are required for the localization of the mobile robots. Indoor localization schemes using ultrasonic sensors have been widely studied due to its cheap price and high accuracy. However, ultrasonic sensors have some shortages of short transmission range and interferences with other ultrasonic signals. In order to use multiple robots in wide workspace concurrently, it is necessary to resolve the interference problem among the multiple robots in the localization process. This paper proposes an indoor localization system for concurrent multiple robots localization in a wide service area which is divided into multi-block for the reliable sensor operation. The beacon color code scheduling algorithm is developed to avoid the signal interferences and to achieve efficient localization with high accuracy and short sampling time. The performance of the proposed localization system is verified through the simulations and the real experiments.

• 디지털콘텐츠학회 논문지
• /
• 제5권3호
• /
• pp.187-191
• /
• 2004

모바일 통신 채널의 빠른 변화는 다중 반송파 변조의 성능에 많은 영향을 준다. 본 논문에서는 다중 반송파 CDMA 네트워크의 BER 성능을 분석하였고 등가 신호 대 전체 잡음 전력비를 라이시안 페이딩, 부분대역간섭 다중접속 사용자 간섭채널에서 유도하였다. MC-CDMA 시스템의 역방향 링크 등가 SNIR을 사용하여 MC-CDMA/BPSK 신호의 성능을 부분대역간섭의 점유율과 간섭 전력에 따라서 평가하였다. 그리고 다중반송파 멀티미디어 시스템의 QoS를 향상하기 위한 부분대역간섭의 영향을 종합적으로 연구하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.199-204
• /
• 2003

This paper proposes reconfigurable hardware structures for spreading and scrambling of multi-mode CDMA systems. The proposed reconfigurable structures supporting IS-95, cdma2000 and WCDMA, include a pseudo noise code generator, a channelization code generator and a control circuit for signal flow control. The proposed reconfigurable structures provide an efficient hardware usage for multi-mode CDMA systems. The synthesis results show the area reduction about 24.7% compared with the original code generators. The proposed structures can provide efficient reconfigurability and high speed operations for future SDR systems.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.1896-1906
• /
• 2020

The BEAVRS (Benchmark for Evaluation and Validation of Reactor Simulation) benchmark calculations were performed by DeCART stand-alone and DeCART/MATRA multi-physics coupled code system to verify their accuracy. The solutions of DeCART stand-alone calculations for the control rod bank worth, detector signal, isothermal temperature coefficient, and critical boron concentration agreed very well with the measurements. The root-mean-square errors of the boron letdown curves for two-cycles were less than about 20 ppm, while the individual and total control rod bank worth agreed well within 7.3% and 2.4%, respectively. For the BEAVRS benchmark calculations at the beginning of burnup, the difference between DeCART simplified thermal-hydraulic stand-alone and DeCART/MATRA coupled calculations were not significantly large. Therefore, it is concluded that both the DeCART stand-alone code and the DeCART/MATRA multi-physics coupled code system have the capabilities to generate high fidelity transport solutions at core follow calculations.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.600-602
• /
• 2006

Some abnormal signals diagnostics and analysis through an important equivalent circuits modeling for passive elements under severe accident conditions have been performed. Unlike the design basis accidents, there are inherently some uncertainties in the instrumentation capabilities under the accident conditions. So, the circuit simulation analysis and diagnosis methods are used to assess instruments in detail when they give apparently abnormal readings as an accident alternative method. The simulations can be useful to investigate what the signal and circuit characteristics would be when similar to a variety of symptoms that can result from the environmental conditions such as high temperature, humidity, and pressure condition. In this paper, a new simulator through an analysis of the important equivalent circuits modeling under temperature accident conditions has been designed, the designed simulator is composed of the LabVIEW code as a main tool and the out-put file of the Multi-SIM code as an engine tool is exported to in-put file of the LabVIEW code. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis method, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen. This simulator should be possible that it could be applied a output signal analysis to some transient signal by variation of the resistance passive elements in the R-L-C equivalent circuit modeling under various degraded conditions in NPPs.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권3호
• /
• pp.173-179
• /
• 2022

The satellite navigation deception technology disturbs the navigation solution of the receiver by generating a deceptive signal simulating the actual satellite for the satellite navigation receiver mounted on the unmanned aerial vehicle, which is the target of deception. A single spoofing technique that creates a single deceptive position and velocity can be divided into a synchronized spoofing signal that matches the code delay, Doppler frequency, and navigation message with the real satellite and an unsynchronized spoofing signal that does not match. In order to generate a signal synchronized with a satellite signal, a very sophisticated and high precision signal generation technology is required. In addition, the current position and speed of the UAV equipped with the receiver must be accurately detected in real time. Considering the detection accuracy of the current radar technology that detects small UAVs, it is difficult to detect UAVs with an accuracy of less than one chip. In this paper, we assume the asynchrony of a single spoofing signal and propose a region defense technique using multiple spoofing signals.