• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.76-84
• /
• 2000

Communication systems, including cell-based mobile communication systems, multiple satellite communication systems of multi-beam satellite systems, require reliable handoff methods between cell-to-cell, satellite-to-satellite of beam-to-team, respectively. Recent measurement of a CDMA cellular system indicates that the system is in handoff at about 35% to 70% of an average call period. Therefore, system reliability during handoff is one of the major system performance parameters and eventually becomes a factor in the overall system capacity. This paper presents novel and improved techniques for handoff in cellular communications, multi-beam and multi-satellite systems that require handoff during a session. this new handoff system combines the soft handoff mechanism currently implemented in the IS-95 CDMA with code and packet diversity combining techniques and an iterative decoding algorithm (Turbo Coding). the Turbo code introduced by Berrou et all. has been demonstrated its remarkable performance achieving the near Shannon channel capacity [1]. Recently. Turbo codes have been adapted as the coding scheme for the data transmission of the third generation international cellular communication standards : UTRA and CDMA 2000. Our proposed encoder and decoder schemes modified from the original Turbo code is suitable for the code and packet diversity combining techniques. this proposed system provides not only an unprecedented coding gain from the Turbo code and it iterative decoding, but also gain induced by the code and packet diversity combining technique which is similar to the hybrid Type II ARQ. We demonstrate performance improvements in AWGN channel and Rayleigh fading channel with perfect channel state information (CSI) through simulations for at low signal to noise ratio and analysis using exact upper bounding techniques for medium to high signal to noise ratio.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.12-21
• /
• 1996

The trellis shaping is the method of selecting a minimum weight sequence from an equivalent class of possible transmitted sequences. It is perforemed by searching through the trellis diagram of a shaping convolutional code Cs. A shaping gain of the order of 1dB may be obtained with a simple 4-state shaping code. But when the rellis shaping is applied to multi-dimensional constellation, the shaping gain is decreased and the transmission delay is increased, which make it difficult to apply the trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping algorithm is used for the mapper in the proposed trellis shaping. The simulatio result shows that the proposed trellis shaping is better than coventional trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping on multi-dimensional costellation with respect to shaping gain and transmission delay. And the constellation expansion ratio (CER) and the capacity of transmitted injformation are identical to those of conventional trellis shaping on multi-dimensional constellation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.265-275
• /
• 2011

In this paper, we propose a Multi-Strata Space Time Code(MSSTC) for MIMO retransmissions. Since MSSTC is constructed by superimposing two OSTBC matrices, there are no intra-stratum interferences, but there exist inter-strata interferences. In MIMO retransmission environment, the transmitter switches adaptively the phases of strata at each transmission by using 1-bit feedback sent from the receiver in order to reduce the inter-strata interferences efficiently. We also propose a power allocation scheme between strata to improve error performance. Simulation results show that the proposed scheme achieves better performance than other conventional schemes.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.591-594
• /
• 2008

Currently RFID code systems are classified into ISO, EPC, uCode, KKR code, Mobile RFID code, and etc. According to RFID code systems, RFID system is changed. For various RFID code systems, it's difficult to make it to the network and permanence of RFID business. And the existing system isn't add new RFID code systems to RFID system, and change it efficiently. This paper is proposed to a system of Multi RFID code Identification Translation using Ontology. This system is able to identify code data from RFID reader using ontology build into the identifier info and translation info of RFID code systems, and translate to URN data. Therefore in case of extending and changing RFID code systems, we can add and change the identifier info and translation info of RFID code systems in ontology.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.41-46
• /
• 2008

A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.27-30
• /
• 2004

OFDMA is considered as one of the major candidates for broadband wireless access. The OFDMA signal is usually coherently demodulated, requiring the channel estimation which can be estimated using a known pilot signal. In multi-cell environment, the performance of channel estimation is mainly limited by intercell interference. It is desirable to use a pilot signal that can estimate the channel information robust to the intercell interference in the OFDMA uplink system. In this paper, we consider two types of pilot signal applicable to multi-cell OFDMA uplink systems: One is time-multiplexed pilot signal and the other is code­multiplexed pilot signal. Simulation results show that the code-multiplexed pilot is suitable for low mobility environment and time-multiplexed pilot is suitable for high mobility environment.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.281-284
• /
• 2003

Multi-code CDMA is an appropriate scheme for transmitting high rate data. However, dynamic range of the signal is large, and power amplifier with good linearity is required. Code select CDMA (CS/CDMA) is a variation of multi-code CDMA scheme that ensures constant amplitude transmission. In CS/CDMA input data selects multiple orthogonal codes, and sum of these selected codes are MPSK modulated to convert multi-level symbol into different carrier phases. CS/CDMA system employs level clipping to limit the number of levels at the output symbol to avoid hish density of signal constellation. In our previous work we showed that by encoding input data of CS/CDMA amplitude of the output symbol can be made constant. With this coding scheme, level clipping is not necessary and the output signal can be BPSK modulated for transmission. In this paper we show that the constant amplitude coded(CA-) CS/CDMA transmitter can be implemented using only logic gates, and the hardware complexity is very low. In the proposed transmitter architecture there is no apparent redundant encoder block which plays a major role in the constant amplitude coded CS/CDMA.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.393-399
• /
• 2011

We evaluate the link-level performance of cooperative multi-hop relaying networks with an maximum distance separable (MDS) code. The effect of the code on the link-level performance at the destination is investigated in terms of the outage probability and the spectral efficiency. Assuming a simple topology, we construct an absorbing Markov chain. Numerical results indicate that significant improvement can be achieved by incorporating an MDS code. MDS codes successfully facilitate recovery of the message block at a relaying node due to powerful error-correcting capability, so that it can reduce the outage probability. Furthermore, we evaluate the average number of hops where the message block can be delivered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.980-989
• /
• 2002

In this paper, we have proposed the sectorization method of the adaptive sector antenna and the new receiver structure for the CDMA wireless multi-media communication which uses multi-code and single-code. The sectorization and average BER performance of the adaptive sector antenna, which employs the proposed sectorization method, are obtained through simulation. The simulation results have shown that the sizes of sectors are properly controlled according to the distribution of the load and that the BER performance of the adaptive sector antenna is enhanced much more than that of the fixed sector antenna. Also, we have proposed two receivers, which are different from the positions to detect multi-code signals, for the multi-media communication. Each receiver has a simple cancellation scheme and two adaptive sector antennas, which are called the 1st adaptive sector antenna and the 2nd adaptive sector antenna, respectively. In this paper, the average BER performances of the receivers are compared through simulation. As the results of the simulation, we have recognized that all user' BER performances are greatly dependent on the positions to detect the multi-code signals. When we consider both system complexity and terget BERs of signals, we have concluded that the receiver, which detect multi-code signals in the 1st and the 2nd adaptive sector antenna, is appropriate for the CDMA wireless multi-media communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1672-1677
• /
• 2015

The multi-level holographic storage system can store more than one bit per pixel. In this paper, we introduce a 6-pixel 4-level modulation code and compare with 4-level 6/9 modulation code and 2/3 modulation code. The proposed 6-pixel modulation code has the minimum Euclidean distance 3. The 6-pixel modulation code is approximately 1dB better than the other modulation codes.