• Computers and Concrete
• /
• 제16권2호
• /
• pp.329-342
• /
• 2015

The present paper aims at developing a method to accommodate multi-surface concrete plasticity from the point of view of a consistency concept applied to general tangent operators. The idea is based on a Taylor series expansion of the actual effective stress at the stress point corresponding to the previous accumulated true stresses plus the current increment values, initially taken to be elastic. The proposed algorithm can be generalized for any multi-surface criteria combination and has been tested here for typical cement-based materials. A few examples of application are presented to demonstrate the effectiveness of the multi-surface technique as used to a combination of Rankine and Drucker-Prager yield criteria.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.407-407
• /
• 2017

홍수 예측을 위한 분포형 수문모형의 유출해석에서 하도추적은 수리학적 하도 추적과 수문학적 하도 추적 방법이 있다. 수리학적 하도 추적은 운동파 방정식, 확산파 방정식 등을 이용하여 수리현상을 시간과 공간으로 편미분하여 홍수량 예측을 한다. 수리적 하도 추적은 시간적, 공간적 안정조건(stability condition)을 만족해야된다. 면적이 큰 유역에서 적용할 때에는 계산에 소요되는 시간이 크다. 그러므로 국지호우로 인한 돌방홍수 예 경보를 위해서는 준실시간 또는 실시간 홍수 감시 및 예측이 필요하므로 계산에 소요되는 시간이 큰 수리학적 하도추적을 이용한 홍수 예측은 한계를 가진다. 본 연구에서는 유역면적이 큰 유역의 준실시간 홍수 감시 및 예측을 위하여 수문학적 하도추적 기법은 하천차수별 저류상수를 적용한 multi-Muskingum방법을 개발하여 모의하였다. multi-Muskingum 적용한 결과 모의시간이 상당히 단축되었으며 자료동화 기법을 통하여 모형의 정확도를 개선하였다.

• 센서학회지
• /
• 제30권4호
• /
• pp.218-222
• /
• 2021

Wearable multi-sensors based on nanocrystals have attracted significant attention, and studies on patterning technology to implement such multi-sensors are underway. Conventional patterning processes may affect material properties based on high temperatures and harsh chemical conditions. In this study, we developed an inkjet printing technique that can overcome these drawbacks through the application of patterning processes at room temperature and atmospheric pressure. Nanocrystal-based ink is used to adjust properties efficiently. Additionally, the viscosity and surface tension of the solvents are investigated and optimized to increase patterning performance. In the patterning process, the electrical, electrothermal, and electromechanical properties of the nanocrystal pattern are controlled by the ligand exchange process. Experimental results demonstrate that a multi-sensor with a temperature coefficient of resistance of 3.82 × 10^-3 K^-1 and gauge factor of 30.6 can be successfully fabricated using one-step inkjet printing.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1244-1255
• /
• 2015

This paper presents a new multi-machine robust control based on an electric differential system for electric vehicle (EV) applications which is composed of four in-wheel permanent magnet synchronous motors. It is based on a new master-slave direct torque control (DTC) algorithm, which is used for the control of bi-machine traction systems based on a speed model reference adaptive system observer. The use of an electric differential in the design of a new EV constitutes a technological breakthrough. A classical system with a multi-inverter and a multi-machine comprises a three-phase inverter for each machine to be controlled. Another approach consists of only one three-phase inverter for several permanent magnet synchronous machines. The control of multi-machine single-inverter systems is the subject of this study. Several methods have been proposed for the control of multi-machine single-inverter systems. In this study, a new master-slave based DTC strategy is developed to generate an electric differential system. The entire system is simulated by Matlab/Simulink. The simulation results show the effectiveness of the new multi-machine robust control based on an electric differential system for use in EV applications.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.689-695
• /
• 2005

Multi-pass wet wire drawing process is used to produce fine wire in the industrial field. The production of fine wire through multi-pass wet wire drawing process with appropriate dies pass schedule would be impossible without understanding the relationship among many process parameters such as material properties, dies reduction, friction conditions, drawing speed etc However, in the industrial field, dies pass schedule of multi-pass wet wire drawing process has been executed by trial and error of experts. This study investigated the relationship among many process parameters quantitatively to obtain the important process information fur the appropriate pass schedule of multi-pass wet wire drawing process. Therefore, it is possible to predict the many important process parameters of multi-pass wet wire drawing process such as dies reduction, machine reduction, drawing force, backtension force, slip rate, slip velocity rate, power etc. The validity of the analyzed drawing force was verified by FE simulation and multi-pass wet wire drawing experiment. Also, pass redesign was performed based on the analyzed results, and the wire breakage between the original pass schedule and the redesigned pass schedule was compared through experiment.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.141-143
• /
• 2017

많은 사람이 스마트폰을 소유하고 어디에서나 스마트폰 사용 모습을 볼 수 있을 만큼 스마트폰의 사용이 일상화되어 가고 있다. 스마트폰 사용 중 특히 모바일게임은 스마트폰이 보급된 이후 꾸준히 성장해온 시장으로 많은 게임이 있다. 그 가운데 국내 모바일 게임 시장에서 인기가 있는 게임은 RPG(Role Playing Game)게임이다. RPG 게임은 게임의 재미를 위하여 오랜 시간 성장이 필요하고, 자동기능을 통해 게임을 즐기기보다는 성장에 주목적을 두고 게임을 하고 있다. 이에 본 논문에서는 간단한 조작만으로 게임을 즐길 수 있는 아케이드 게임을 설계하고 Unity를 사용하여 이를 구현하였다.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.76-82
• /
• 2009

The NIOSH lifting equation has been used as a dominant tool in evaluating the hazard levels of lifting tasks. Although it provides two different ways for each simple and complex lifting task, the NIOSH simple lifting equation is almost used for not only simple tasks but also complex tasks. However, most of lifting tasks in industries are in the form of complex lifting. Therefore some errors occur inevitably in the evaluation of complex lifting tasks. Among complex lifting tasks, a multi-stacking task is the most popular in lifting tasks. To compensate the error in the evaluation of multi-stacking tasks by using the NIOSH simple lifting equation, a set of calculations for finding LIs(Lifting Indices) was performed for the systematically varying multi-stacking tasks. Then a regression model which finds the equivalent height in simple lifting task for multi-stacking task was established. By using this model, multi-stacking tasks can be evaluated with less error. To validate this model, some real multi-stacking tasks were evaluated as examples.

• 대한간호학회지
• /
• 제43권2호
• /
• pp.185-193
• /
• 2013

Purpose: Simulation-based learning has become a powerful method to improve the quality of care and help students meet the challenges of increasingly complex clinical practice settings. The purpose of this study was to identify the learning effects using high-fidelity SimMan and multi-mode simulation. Methods: Participants in this study were 38 students who were enrolled in an intensive course for a major in nursing at R college. Collected data were analyzed using Chi-square, t-test, and independent t-test with the SPSS 18.0 for Windows Program. Results: There were no statistically significant differences in learning effects between high-fidelity SimMan and multi-mode simulation group. However, skills in clinical performance in the high-fidelity SimMan group were higher than in the multi-mode group (p=.014), communication in clinical performance in multi-mode simulation group was higher than in the high-fidelity SimMan group (p<.001). Conclusion: Multi-mode simulation with a standardized patient is an effective learning method in many ways compared to a high-fidelity simulator. These results suggest that multi-mode simulation be offered to students in nursing colleges which cannot afford to purchase a high-fidelity simulator, or offered as an alternative.

• 한국전자파학회논문지
• /
• 제27권11호
• /
• pp.949-958
• /
• 2016

본 논문은 다중대역 및 다중모드의 레이다 기능을 갖는 새로운 SDR(Software Defined Radar) 플랫폼의 개발 결과를 제시한다. SDR 하드웨어 플랫폼은 다중대역의 S, X, 그리고 K 밴드의 교체 가능한 RF 송수신기 및 안테나 모듈과 프로그램 가능한 신호처리기 모듈로 구현된다. 소프트웨어 플랫폼은 다중모드의 CW, Pulse, FMCW, LFM Chirp 파형 발생과 적응 가능한 신호처리 알고리즘 라이브러리 모듈 및 개방형 API 소프트웨어 모듈로 구현된다. SDR 플랫폼의 레이다 통합시험을 통하여 동작 성능을 실시간으로 검증하였으며, 또한 현장 활용시험을 통하여 지상 표적 및 비행체 드론 표적을 성공적으로 탐지하여 시험 결과를 제시하였다.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1234-1245
• /
• 2018

The risk of multi-unit nuclear power plants (NPPs) at a site has received considerable critical attention recently. However, current probabilistic safety assessment (PSA) procedures and computer code do not support multi-unit PSA because the traditional PSA structure is mostly used for the quantification of single-unit NPP risk. In this study, the main purpose is to develop a multi-unit Level 2 PSA method and apply it to full-power operating six-unit OPR1000. Multi-unit Level 2 PSA method consists of three steps: (1) development of single-unit Level 2 PSA; (2) extracting the mapping data from plant damage state to source term category; and (3) combining multi-unit Level 1 PSA results and mapping fractions. By applying developed multi-unit Level 2 PSA method into six-unit OPR1000, site containment failure probabilities in case of loss of ultimate heat sink, loss of off-site power, tsunami, and seismic event were quantified.