• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.525-528
• /
• 2021

본 논문은 산업현장이 아닌 카페등 생활현장에서의 폐기용 컵 처리를 목적으로, 사람을 대신해 지능적이고 기구학적으로 효율적인 다관절 메니퓰레이터의 설계 방법을 연구하였다. 다양한 장소에서 인간을 대신하여 임의의 위치에 있는 다양한 폐기 컵을 3D 카메라로 인식하여 알맞은 위치로 분리수거하는 6축 수직 다관절 모듈형 매니퓰레이터의 안정적인 동작을 위하여 기구부를 Yaw-Pitch-Pitch-Pitch-Yaw-Yaw의 6축 구조로 설계하고, 이를 구동하기 위한 관절 구동기의 용량을 분석하여 관절 구동기를 선정하며 전체적인 이해와 효율적인 분석을 위해 기구 전체의 외관을 3D 모델링 프로그램을 이용하여 구현하고 동작을 검증하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.409-412
• /
• 2021

본 논문에서는 카페나 패스트푸드점같은 장소에서 인간을 대신하여 임의의 위치에 있는 다양한 컵을 3D 카메라로 검출하여 알맞은 위치로 분리수거하는 6축 수직 다관절 로봇 팔을 설계하였다. Yaw-Pitch-Pitch-Pitch-Yaw-Yaw 6축 구조로 설계하였으며, 이를 구동하기 위한 관절 구동기의 용량을 분석을 통해 최적화하였다. 각각 재질이 다른 컵을 그리퍼를 이용하여 잘 파지할 수 있도록 재질에 따른 파지력을 분석하였고 압력센서를 이용하여 재질이 다른 컵을 구분하여 분리수거 할 수 있도록 하였다. 실험을 통해 로봇의 성능과 개선점을 제시하였다.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.605-628
• /
• 2016

The energy absorption characteristics of diamond core sandwich cylindrical columns under axial crushing process depend greatly on the amount of material which participates in the plastic deformation. Both the single-objective and multi-objective optimizations are performed for columns under axial crushing load with core thickness and helix pitch of the honeycomb core as design variables. Models are optimized by multi-objective particle swarm optimization (MOPSO) algorithm to achieve maximum specific energy absorption (SEA) capacity and minimum peak crushing force (PCF). Results show that optimization improves the energy absorption characteristics with constrained and unconstrained peak crashing load. Also, it is concluded that the aluminum tube has a better energy absorption capability rather than steel tube at a certain peak crushing force. The results justify that the interaction effects between the honeycomb and column walls greatly improve the energy absorption efficiency. A ranking technique for order preference (TOPSIS) is then used to sort the non-dominated solutions by the preference of decision makers. That is, a multi-criteria decision which consists of MOPSO and TOPSIS is presented to find out a compromise solution for decision makers. Furthermore, local and global sensitivity analyses are performed to assess the effect of design variable values on the SEA and PCF functions in design domain. Based on the sensitivity analysis results, it is concluded that for both models, the helix pitch of the honeycomb core has greater effect on the sensitivity of SEA, while, the core thickness has greater effect on the sensitivity of PCF.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2012

This study gives the vertical motion analysis in multi-directional irregular waves using a commercial code(MAXSURF v.16) based on linear strip theory for a training ship. To verify the commercial code prior to the analysis, we guarantees the reliability of this paper's results using the commercial code by comparing with the results(Flokstra, 1974) of same hull and experimental conditions on a Panamax container. The analysis conditions are Beaufort wind scale No. 5($\bar{T}=5.46$, $H_{1/3}=2m$) based on ITTC wave spectrum, encounter angle Head & bow seas($150^{\circ}$) and Froude number Fn=0.257. Finally, we calculates heave RAO, pitch RAO and obtains the result of ship's response spectra for heave and pitch motions. In the motion response spectrum under the multi-directional irregular waves, heave motion reacts slightly high in short-crested waves and pitch motion reacts high in long-crested waves.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.179-185
• /
• 2008

The purpose of this paper is to propose a systematic method on the weld pitch design of a vehicle sub-frame considering the fatigue life of spot welding points. The input data, which perform the fatigue analysis on the spot welding nuggets, are obtained by both the dynamic analysis of the multi-body vehicle model passing through the virtual proving ground of a typical Belgian road and the quasi-static analysis with the finite element model of the vehicle sub-frame. By utilizing the life cycle data obtained from the fatigue analysis, the welding points to perform the pitch change are determined. The sensitivity analysis on the fatigue life of the welding points is carried out by using the three-level orthogonal array design, and through the results of the sensitivity analysis, the best combination on the welding pitch is determined. This study shows that as compared with the baseline design, the sub-frame redesigned by the proposed technique improves the fatigue life about 7 percent while reducing the number of welding points about 19 percent.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1436-1443
• /
• 1989

In this paper, we propose a maximum-likelihood estimation(MLE) method to obtain the location and the amplitude of the pulses in MPE( multi-pulse excitation)-LPC speech synthesis using multi-pulses as excitation source. This MLE method computes the value maximizing the likelihood function with respect to unknown parameters(amplitude and position of the pulses) for the observed data sequence. Thus in the case of overlapped pulses, the method is equivalent to Ozawa's crosscorrelation method, resulting in equal amount of computation and sound quality with the cross-correlation method. We show by computer simulation: the multi-pulses obtained by MLE method are(1) pseudo-periodic in pitch in the case of voicde sound, (2) the pulses are random for unvoiced sound, (3) the pulses change from random to periodic in the interval where the original speech signal changes from unvoiced to voiced. Short time power specta of original speech and syunthesized speech obtained by using multi-pulses as excitation source are quite similar to each other at the formants.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.635-640
• /
• 2000

This paper presents the analysis method of the instantaneous screw axis using line geometry in bump and rebound motion of 5-SS multi-link suspensions. Instantaneous screw axis is based on screw motion, and screw motion of zero pitch can be expressed as $Pl{\ddot{u}}cker$ line coordinates of line geometry instead of screw coordinates. In screw coordinates, twist and wrench are described by components of instantaneous screw axis. For instantaneous motion of wheel assembly, the principle of virtual work with twist and wrench is applied to 5-SS multi-link suspension, and it makes 5 linear equations. Therefore, it is possible to find instantaneous screw axis by solving these equations. This analysis by line geometry demands geometric values only, such as the locations of spherical joints in the case of multi-link suspensions.

• Journal of Magnetics
• /
• v.15 no.1
• /
• pp.36-39
• /
• 2010

The multi-degrees of freedom surface permanent-magnet motor (Multi-D.O.F. SPM) has several degrees of freedom operations that are defined as the "roll", "yaw", and "pitch". Normally, the torque that is generated to rotate a rotor includes ripples. The analysis of the torque ripples is important for improving motor performance. In terms of the electric analysis, torque ripple occurs as a result of many factors, including the rotor and stator structures, the distribution of the air-gap flux density, and the waveform of the current in the coils. In particular, the torque ripple is an important factor in the stable operation of the Multi-D.O.F. SPM. Therefore, in this work, the torque ripple was analyzed using various types of magnetization for the permanent magnet. An improved model was proposed for the Multi-D.O.F. SPM based on this analysis.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.47-47
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.129-136
• /
• 2011

This paper presents the coding method that have multi-mode and efficiency of audio codecs using the feature of audio signal. Recently, the developed extension super-wideband codec based on G.718 wideband divides two mode between Generic and Sinusiodal. So codec efficently encode audio signal exist in super-wideband. But the codec is not as efficent coding for harmonic component of wind instrument and string instrument and individual-Line component of percussion instrument. The proposed method are modeling and encoding multiple pitch and individual-line feature using multi mode coding. For the performance evaluation, we used SNR in MDCT domain for objective test and MUSHRA test for subjective test. As a result, the performance of SNR and MUSHRA test of the proposed method have better performance than the G.718 super-wideband codec.