• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.277-280
• /
• 2001

We proposed a novel fractal-space multiplexing holographic memory system using moving window and double-focusing lens, which can eliminate crosstalk due to two neighboring moving window rows in the vertical direction of the conventional moving window holographic memory system, and demonstrated its feasibility through optical experiments.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.5-6
• /
• 2010

Needs for the methodology of segmentation of linear feature according to the shape characteristics of line feature are increasing in cartographic linear generalization. In this study, the line segmentation method using expansible moving window is presented. This method analyzes the generalization effect of line simplification algorithms depend on the line characters of linear feature and extracts the sections which show exclusively low positional error due to a specific algorithm. The description measurements of these segments are calculated and the target line data are segmented based on the measurements. For segmenting the linear feature to a homogeneous section, expansible moving window is applied. This segmentation method is expected to be used in the cartographic map generalization considering the shape characteristics of linear feature.

• 말소리와 음성과학
• /
• 제3권3호
• /
• pp.99-108
• /
• 2011

The perturbation parameters like jitter, shimmer, and signal-to-noise ratio (SNR) are largely estimated in the particular segment from the subjective or whole portion of the given pathological voice signal although there are many possible regions to be able to analyze the voice signals. In this paper, the pathological voice signals were classified as type 1, 2, 3, or 4 according to narrow band spectrogram and the value differences of the perturbation parameters extracted in the subjective and entire portion tended to be getting bigger as from type 1 to type 4 signals. Therefore, sample selection method based on moving window to analyze type 2 and 3 signals as well as type 1 signals is proposed. Although type 3 signals cannot be analyzed using the perturbation analysis, the type 3 signals by selecting out the samples in which error count is less than 10 through moving window were analyzed. At present, there is no method to be able to analyze the type 4 signals. Future research will endeavor to determine the best way to evaluate such voices.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.889-893
• /
• 2000

In this paper, a method to detect lanes and obstacles from the images captured by a CCD camera fitted in an automobile is proposed, and a new terminology “Moving Window” is defined. Processing the input dynamic images in real time can cause quite a few constraints in terms of hardware. In order to overcome these problems and detect lanes and obstacles in real time using the images, the optimal size of “Moving Window” is determined, based upon road conditions and automobile states. The real time detection is made possible through the technique. For each image frame, the moving window is moved in a predicted direction, the accuracy of which is improved by the Kalman filter estimation. The feasibility of the proposed algorithm is demonstrated through the simulated experiments of freeway driving.

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.44-51
• /
• 2004

움직이는 창(moving window； MW)을 이용한 프랙탈-공간 다중화 방법은 액정디스플레이(liquid crystal display; LCD) 상에서 수평, 수직방향으로 움직이는 창들을 통과한 기준빔으로 홀로그램을 다중화하는 방법이다. 그러나, 수직방향으로 인접한 MW사이에서 누화가 발생하여 고밀도의 정보저장 및 복원이 제한되고 있다. 따라서, 본 논문에서는 고밀도의 정보저장을 위해 렌즈의 초점거리, MW의 간격, 다중화되는 홀로그램의 개수에 의한 누화를 이론적으로 분석하고, 체적형 광굴절결정과 디스크형 광폴리머를 이용한 프랙탈-공간 다중화 실험 결과를 제시하였다.

• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.593-603
• /
• 1997

Connection admission decision in ATM networks requires decision made in real time using fast algorithm. It is difficult to construct a model of the multiplexed traffic and thus, approximation of the traffic load is necessary. In this paper, we propose a measurement-based dynamic CAC(Connection admission Control) in ATM(Asynchronous Transfer Mode) networks, which observes current traffic by the moving window and set the window size to the value which is computed from the measured cell loss amount. It is based on the measurements of the traffic load over an admission period that is load enough to reflect the current traffic behavior instead of analytic modeling. And, the dynamic reallocation of bandwidth for each class leads to effective bandwidth utilization. The performance of proposed method is analyzed through computer simulation. The performance of proposed method is analyzed by using SIMAN simulation package and FORTRAN language. As can be seen in the simulation result, cell loss performance and bandwidth utilization have been increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2070-2075
• /
• 2008

Identification of steady-state is the first step in developing a fault detection and diagnosis (FDD) system. In a complete FDD system, the steady-state detector will be included as a module in a self-learning algorithm which enables the working system's reference model to "tune" itself to its particular installation. In this study, a steady-state detector of a residential air conditioner based on moving windows was designed. Seven representing measurements were selected as key features for steady-state detection. The optimized moving window size and the feature thresholds was suggested through startup transient test and no-fault steady-state test. Performance of the steady-state detector was verified during indoor load change test. From the research, the general methodology to design a moving window steady-state detector was provided for vapor compression applications.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2000년도 추계학술대회
• /
• pp.214-217
• /
• 2000

We suggested a new non-mechanical angular multiplexed holographic memory system using a moving window. The feasibility of the proposed method was demonstrated through optical experiments and its crosstalk noise analysis were also presented

• 전자공학회논문지S
• /
• 제36S권1호
• /
• pp.93-103
• /
• 1999

본 논문은 주행중의 자동차에 장착된 카메라의 입력 영상으로부터 이동창을 활용하여 차선을 인식하고 장애물을 감지하는 기법을 기술한다. 영상 정보로부터 장애물을 감지하기 위해서 차선의 위치를 빠른 시간에 추출하는 것이 매우 중요하다. 이를 위하여 한 프레임의 영상에서 차선의 입력이 예상되는 일부분만을 선정하는 기법이 일반적이다. 본 논문에서는 주행 차량의 영상 정보로부터 장애물을 감지하기 위하여, 도로의 곡률에 따라 차선의 입력 예상 위치를 측정하여 크기가 조절된 이동하는 창을 설정하여 정확한 차선의 위치를 추출하고, 나아가 주행 차선 내에 위치하는 장애물을 점출할 수 있는 기법을 제안한다. 이를 고정창을 이용하는 경우와 레이저 혹은 레이터 센서를 사용하는 경우와 비교하여, 정확도가 높음을 보였다.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.673-679
• /
• 2012

This paper introduces robust tracking algorithm for fast and erratic moving object. CAMSHIFT algorithm has less computation and efficient performance for object tracking. However, the method fails to track a object if it moves out of search window by fast velocity and/or large movement. The size of the search window in CAMSHIFT algorithm should be selected manually also. To solve these problems, we propose an efficient prediction technique for fast movement of object using Kalman Filter with automatic initial setting and variable configuration technique for search window. The proposed method is compared to the traditional CAMSHIFT algorithm for searching and tracking performance of objects on test image frames.