• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.110-117
• /
• 2004

Recently the hospitals or clinics tend to get out of the functional and technological aspect so as to gradually emphasize service for patients. While qualitative rather than quantitative alteration is noticeable, the scale of clinics is getting larger. Especially, the opulence resulted from economic, social and cultural development has enabled more people to visit dermatology or plastic surgery besides treatment for disease. Responding to this tendency, dermatology is focusing on skin beauty, plastic operation, controlling obesity, etc. for women rather than ordinary treatment. Thus, dermatology is in need of space for skin control as well as ordinary treatment, which raises the immediate necessity of new plan for space and interior environment. In order to meet such necessity of dermatology, it is required to fully study and consider the plan for interior space. First, the purpose, scope and method of research will be defined in the introduction. Second, the concept of clinic as well at the characteristic of dermatology will be studied by theoretical investigation. Third, the general concept of dermatology will be analyzed by examining the characteristic of each room in dermatology, the moving line of nurses and patients, the color of dermatology and the design factor of finishing materials through general investigation on dermatology. Fourth, in order to look into the general case of dermatology, the object of examination will be selected for examination through literature and visiting. After examining data, the result will be analyzed and evaluated to prepare the ground for interior plan of dermatology.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.6
• /
• pp.437-443
• /
• 2014

Vibration testing is conducted for evaluate the fatigue resistance of responsible system over excitation situations and two kinds of vibration profiles, harmonic or random, are widely used in engineering fields. Harmonic excitation profile is adequate for the rotating machinery that is primarily exposed to the orderly excited force subjected for a rotating speed; Random profile is suitable for the non-stationary vibration input, that is a ground excitation for example. Recently, the sine on random(SOR) testing method was sometimes considered to represent the real excitation conditions since the measured response signals of a target system, expecially for moving mobility, shows usually a mixture of them. So, it is important to understand the accumulated fatigue damage over different excitation patterns, harmonic and/or random, to determine the efficient vibration profile of a target system. A uniaxial vibration testing with a notched simple beam was introduced to evaluate the fatigue damage for different excitation profiles and the best choice of vibration profile was concluded from those comparison of calculated fatigue damages.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.340-345
• /
• 2014

Vibration testing is conducted for evaluate the fatigue resistance of responsible system over excitation situations and two kinds of vibration profiles, harmonic or random, are widely used in engineering fields. Harmonic excitation profile is adequate for the rotating machinery that is primarily exposed to the orderly excited force subjected for a rotating speed; Random profile is suitable for the non-stationary vibration input, that is a ground excitation for example. Recently, the sine on random (SOR) testing method was sometimes considered to represent the real excitation conditions since the measured response signals of a target system, expecially for moving mobility, shows usually a mixture of them. So, it is important to understand the accumulated fatigue damage over different excitation patterns, harmonic and/or random, to determine the efficient vibration profile of a target system. A uniaxial vibration testing with a notched simple beam was introduced to evaluate the fatigue damage for different excitation profiles and the best choice of vibration profile was concluded from those comparison of calculated fatigue damages.

• Wind and Structures
• /
• v.26 no.5
• /
• pp.317-329
• /
• 2018

Wake characteristics of the flow over a finite square prism at different incidence angles were experimentally investigated using an open-loop wind tunnel. A finite square prism with a width D = 15 mm and a height H = 7D was vertically mounted on a horizontal flat plate. The Reynolds number was varied from $6.5{\times}10^3$ to $28.5{\times}10^3$ and the incidence angle ${\alpha}$ was changed from $0^{\circ}$ to $45^{\circ}$. The ratio of boundary layer thickness to the prism height was about ${\delta}/H=7%$. The time-averaged velocity, turbulence intensity and the vortex shedding frequency were obtained through a single-component hotwire probe. Power spectrum of the streamwise velocity fluctuations revealed that the tip and base vortices shed at the same frequency as that ofspanwise vortices. Furthermore, the results showed that the critical incidence angle corresponding to the maximum Strouhal number and minimum wake width occurs at ${\alpha}_{cr}=15^{\circ}$ which is equal to that reported for an infinite prism. There is a reduction in the size of the wake region along the height of the prism when moving away from the ground plane towards the free end.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.503-514
• /
• 2004

In Seoul metropolitan area, nocturnal variation of surface ozone concentrations observed at 27 monitoring sites from 1998 to 2002 showed that high ozone levels occurred frequently during the spring. Frequency distributions for nighttime ozone indicated that elevated concentrations in spring were influenced by advection of different air mass compared to other seasons. Surface wind analysis during the spring revealed that relatively strong southwesterly winds were associated with nocturnal ozone enhancement, which can be attributed to the regional transport of ozone. In order to identify the origin of nocturnal ozone enhancement in spring, 3-day backward trajectories were calculated by HYSPLIT 4 for the episode days and then classified. The results showed that NW, W, and SW flows, indicating influence of polluted air masses from the China continent, have 51% in a]1 the episode days, which suggest that the nocturnal ozone enhancement can occur under the effect of long-range transport of ozone-laden air mass on a regional scale. Case study of nocturnal ozone maxima associated with long-range transport was discussed in more detail in the light of meteorological conditions. Southwesterly synoptic flow along the outer edge of moving high-pressure system was found to be the important cause of nocturnal ozone maxima in Seoul. This flow could lead to be long-range transport of ozone that had effectively accumulated in the stagnating portion of the system located eastern coast of China. Low atmosphere soundings, backward trajectories, and elevated ozone and CO levels at the back-ground tiles gave evidence for regional effects on nocturnal ozone enhancement In Seoul.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.1
• /
• pp.1-6
• /
• 1971

In order to study the catching efficiency of shrimp trawl equipped with electrodes around the net mouth and stimulant devices attached to the ground rope, an experimental operation was carried out at Oma-Island Shrimp Farm from October 3rd to November 5th, 1970. Many studies have been made on the shrimp trawl with electric stimulant devices, but few can be found for detailed scientific catching methods. Electric power consumption was so excessive that electric stimulant devices could not be developed for commercial purposes. As a first step toward the successive operations of the electric stimulant devices in the field, it is necessary to study fundamental principles, such as electric current, voltage, electric potential, potential difference, electric field and suitable pulse. The behaviour response of the common shrimp, Penaeus japonicus BATE to moving nets and electric stimulant devices were reported in the preceding papers based on the water tank experiments (Ko and Kim, 1970). Through comparative fishing tests the rate of catching efficiency during daylight time was confirmed to be from 89 to 96 per cent of the night catch efficiency, and with 30 V. 1.5 A. electric power was sufficent for practical sea operation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.299-303
• /
• 2004

In this paper, it is presented a level sensor for measuring a level of the contents of cargo tank using frequency modulated continuous wave(FMCW). The frequency range is 10∼11 GHz, the radar cross section(RCS) of target is 0.8 ㎡ of metal plate. the experiment is performed in laboratory and open ground, the sweep time of the signal is 100 ms, the pyramidal horn antenna of about 20 dBi gain is used, and input power of antenna is about 5 dBm. the beat frequency according to the target moving to 40 m is measured. There is a good agreement between measured and calculated results. But the resolution of the FMCW radar is measured about 10 cm due to nonlinear of voltage controlled oscillator(VCO).

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.13-20
• /
• 2006

A platform diving with categorizing 624C motion was video taped and 3D kinematic variables were analyzed. This motion is consist of 3 parts from the headstand position to the act of turning after take-off. The results indicated that it took a very short time from the moment of take-off to the act of 1/2 turning because the turning motion has already started from preparing motion even before the fingertips have parted from the ground. Also, there was barely any jumping height due to the use of upper limbs segment and there was little difference in the moving distance compared to the standing events judging from horizontal movement of 1.1m. The horizontal velocity of the center of human body was increased before take-off while the vertical velocity was decreased right after take-off and the velocity of lower limbs segment was faster than the upper limbs segment showing contrary results to the standing events. In the aspects of angular velocity, the upper limbs segment starts the turning motion when take-off by rapidly extending its angular velocity while lower limbs segment make large angular velocity even before take-off.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1251-1258
• /
• 1999

The water level control of a steam generator in the unclear power plant is an important process. Most of the water level controllers of the actual plant are PID controllers. But they have limitations in appling for tracking the set point and getting rid of disturbances, so there are some defects to apply in the actual ground even though many research works represented the resolutions to solve it. In this paper, it is suggested that the established simple PID controller in low power has the ability to remove disturbances and trace the set-point, and then possesses the real-time self-tuning function according to the variety of moving peculiarity of a plant. This function realized by making use of fuzzy logic. PID parameters are formulated by a variable ${\alpha}$ and made it fluctuate by a fuzzy inference according to level error and level error change. This mechanism makes application of actual plant effective as well as taking advantage of improving the efficiency of water level controller by way of adding the function of self-tuning instead of replacing PID controller. The computer simulation of this scheme shows the improved performance compare to conventional PID controller.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.140-146
• /
• 1989

In many situations, radar targets are embedded in a clutter environment and clutter rejection is required. The clutter is unwanted radar echoes and may arise owing to reflections from ground and weather disturbances and statistical properties of the clutter vary with range and azimuth as well as time. That is, adaptive signal processing is required. In this paper, a clutter suppression algorithm based on the clutter whitening filter (WF) and doppler filter bank(DFB) is described which provides improved performance compared with conventional nonadaptive clutter suppression algorithm that is the cascaded moving target indicator (MTI) and (DFB). The clutter whitening filter algorithm is based on the Burg's maximum entropy method.