• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.989-994
• /
• 2000

Nine tests to failure are performed on full-scale eight composite beams with unreinforced web opening having ribbed slabs with formed deck which are perpendicular to the steel section and one steel beam. The effects of slab width, reinforcing of stud, moving of rib, moment-shear ratio are studied. At the low M/V ratio, Vierendeel action around the high moment end of the opening is occurred and the large deflection across the opening and transverse cracking are occurred with increasing of applied load. As the M/V ratio increases, the relative deflection across the opening decreases. And at failure, full tensile strain are occurred at bottom T section of steel beam, and concrete crushes at the High Moment End of the opening. With narrow slabs, diagonal tension failure at the high moment end of the opening is occurred. And with wide slabs, rib punch-through failure is occurred near the high moment end of the opening. The implications for design are discussed.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.33-36
• /
• 2009

Laser ablation with femtosecond lasers is highly promising for microfabrication of materials. Also, the high peak power of femtosecond lasers could induce a multiphoton absorption to ablate transparent materials. Similar results have also been were obtained in the case of optical fibers. In this paper, we present our experimental results of femtosecond laser microstructuring of optical fiber and its applications to microelectronic components and fiber optic devices. Finally, we directly produced micro holes with femtosecond laser pulses in a single step by moving an optical fiber in a preprogrammed structure. When water was introduced into a hole drilled from the bottom surface of the optical fiber, the effects of blocking and redeposition of ablated material were greatly reduced and the aspect ratio of the depth of the hole was increased. We have presented circular and rectangular-shaped holes in optical fiber.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.182-186
• /
• 2003

태양전지의 제조가격의 저가화를 위한 노력이 다각적으로 진행되고 있다. 이중에 하나가 규소 잉곳의 대형화이다. 가로 세로 69cm무게 240kg의 초대형 규소 잉곳을 자동화된 결정성장로를 이용하여 제조하였다. 이 방법은 규소 용체의 열을 하부 흑연 기판을 아래로 이동하면서 축출함으로써 방향성 응고를 유도하고 있다. 이 방법으로 제조된 규소 잉곳을 평가하여 본 결과 전기적, 구조적으로 매우 균일하고 태양전지의 제조에 적합한 것으로 판명되었다.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.14-23
• /
• 1996

The Reynolds-averaged Navier-Stokes equations for turbulent flow around a two-dimensional foil section moving ova. a flat surface (roller plate) is solved. The numerical method utilized the finite-difference schemes in collocated grids and the Baldwin-Lomax model is employed for turbulence closure. Calculations are carried out for three foil sections of different mean-line shape with various height ratio. As a foil approaches the bottom surface, the lift is augmented, while there exist some differences in pitching moment due to mean-line shape. It was found that the S-shaped mean line deteriorates lift characteristics but increases pitching moment to restore the designed height.

• International Journal of Computer Science & Network Security
• /
• 제21권2호
• /
• pp.193-197
• /
• 2021

Customers are increasingly attracted towards different e-commerce websites and applications for the purchase of products significantly. This is the reason the sellers are moving to different internet based services to sell their products online. The growth of customers in this sector has resulted in the use of big data analytics to understand customers' behavior in predicting the demand of items. It uses a complex process of examining large amount of data to uncover hidden patterns in the information. It is established on the basis of finding correlation between various parameters that are recorded, understanding purchase patterns and applying statistical measures on collected data. This paper is a document of the bottom-up strategy used to manage the selling price of a first-time product for maximizing profit while selling it online. It summarizes how existing customers' expectations can be used to increase the sale of product and attract the attention of the new customer for buying the new product.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.487-494
• /
• 2014

Deep-seabed test miner operated by a self-propelled mining system moving on soft soil is an essential device to secure floating and towing performances. The performances of the tracked vehicle are seriously influenced by noise factors such as the shear strength of the seafloor, bottom current, seafloor slope, speed of tracked vehicle, reaction forces of flexible hose, steering ratio, etc. Due to uncertainties related to noise factors, the design of a deep-sea manganese nodules test miner that satisfies target reliabilities is difficult. Therefore, reliability-based design optimization (RBDO) is required to guarantee system reliability under circumstances where uncertainties related to noise factors prevail. Among noise factors, the bottom current, a bimodal distribution, is censored due to the observation limit of measurement devices. Therefore, estimated distribution of the bottom current is inaccurate without considering these characteristics and the result of RBDO cannot be guaranteed. In this paper, we define censored data as unknown values over the limit of observation. If this data is estimated by using Akaike information criterion (AIC) that cannot consider the characteristics of censored data, the distribution of estimated data cannot guarantee accurate reliability. Therefore, censored AIC that can consider the characteristics of data is used to estimate accurate distribution of the bottom current. Finally, RBDO, under circumstances where uncertainties related to noise factors combined censored data are present, is performed on the mobility of a deep-sea manganese nodules test miner.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.199-202
• /
• 1996

Artificial hearts are intended for use in patients with severe forms of heart disease for which no surgical repair is possible. The moving-actuator pump was developed to decrease the overall volume size of the electromechanical total artificial heart (TAH) by eliminating the occupied space of the fixed-actuator in the conventional pusher-plate type pump. In our pump, the actuator moves back and forth for alternative ejections of left and right ventricles. The problem of fitting the TAH to atrial remnants and arterial vessels could also be improved by circular or penduluous mot ion of the actuator instead of linear mot ion of the pusher-plate in the conventional pumps. We have evaluated two types of moving- actuator pump; one is a rolling cylinder type, and the other a pendulum type pump. In the rolling cylinder pump, frictional energy loss exists between the pump housing's guide bars and the actuator's end caps, while the bottom rack under the cylindrical actuator increases the height of the pump, the pump is therefor not implantable inside the small chest of human-sized animals with a body weight of less than 70kg. The new human type pump has a penduluous mot ion actuator to correct the above problems while maintaining the advantage of the moving- actuator's small total volume. The totally implantable TAH is composed of a blood pump, a control system and pheriperal equipments. The blood pump, which is constructed by a moving actuator, a right and left blood sac, and four artificial valves, is implanted in the thoracic. In 1988, the first implantation of the rolling cylinder TAH was performed into a female calf weighing 100kg, and the cal f recovered to the degree of voluntary standing and eat ing and survived to 100 hrs. We then survived two female sheep weighing about 63kg with the new human type TAH for three days.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.34-41
• /
• 2010

본 연구를 통해서 대 면적, 저 전력 AMOLED 용용에 적합한 고 개구율 픽셀 보상회로와 이에 대한 구동회로를 제안하였다. 균일도는 다소 떨어지지만 안정성과 이동도가 뛰어난 저온 다결정 실리콘(LTPS) 박막 트랜지스터(TFT)를 기반으로 설계했다. 픽셀의 불량률을 낮추고 배면발광방식에 적합하도록 픽셀 보상회로를 보다 간단하게 개선하여 고 개구율 특성을 갖도록 했다. 제안하는 고 개구율 픽셀 보상회로는 일반적인 구동방식을 사용할 경우 명암비에서 큰 손해를 볼 수가 있으므로, 명암비를 높게 유지하기 위한 구동방식 및 구동회로를 제안하여 검증하였다. 이와 더불어 동영상 특성을 개선하기 위해 black data insertion 방식을 구현할 수 있도록 설계했다. 배면발광방식의 19.6" WXGA AMOLED 패널에 대해 설계했으며, 픽셀의 평균 개구율은 41.9%로 기존에 비해 8.9% 증가했다. TFT의 $V_{TH}$ 편차가 ${\pm}0.2\;V$일 때, 패널의 불균일도와 명암비는 각각 6% 이하와 10만:1 이상으로 예측되었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제1권2호
• /
• pp.82-95
• /
• 1998

이 논문에서는 LS/DYNA3D를 이용하여 다음과 같은 2가지 수치 시뮬레이션을 수행한다: 첫 번째 시뮬레이션은 310,000 DWT 이중선체 VLCC (피충돌선)과 35,000 및 105,000 DWT의 2척의 유조선(충돌선)들과의 충돌에 관한 경우로서, 충돌선들은 VLCC의 중심선에 직각으로 중앙부에 충돌하는 것으로 가정한다. 두 번째는 40,000 DWT급의 재래식과 개량식 이중선체 유조선의 선저구조의 2가지 모델, CONV/PD328과 ADH/PD328에 대한 좌초에 관한 시뮬레이션이다. 이 연구의 전체적인 목적은 이중선체 유조선의 선측 및 선저구조에 충돌 및 좌초가 각각 발생하는 동안에 이중선체의 내판이 찢어지기 시작하고 운동에너지가 소산되면서 선체가 정지되는 등의 구조적인 파손 및 흡수에너지의 역학적인 거동을 이해하는 것이다. 이러한 수치 시뮬레이션을 통하여 충돌 및 좌초시의 손상 정도를 쉽게 추정할 수 있을 것이고 유조선의 설계 시 안전도의 개선에 이바지할 수 있게 할 것이다.

• 지구물리와물리탐사
• /
• 제11권1호
• /
• pp.60-67
• /
• 2008

이 논문에서 우리는 해저용 수신기들과 이동하는 전기적 양극송신기의 한 조로 이루어진 전형적인 해양 인공송신 전자탐사 (MCSEM) 방법에 의해 얻어진 자료 해석에 전자탐사 구조보정법의 적용을 다룬다. 이 연구에서와 같이 다중 송신기와 다중 수신기를 이용해 획득된 자료는 방대한 컴퓨터 계산을 요하기 때문에 MCSEM자료의 3차원적 해석은 매우 도전적인 문제이다. 이와 동시에, 우리는 조밀하게 송신 및 수신기를 위치 시켜야 하는 이 MCSEM시스템은 구조보정법의 적용에 아주 적합하다는 것을 보여줄 것이다. 구조보정장 계산의 속도를 증가시키기 위해 우리는 직접 개발한 다중격자 준선형 (MGQL) 근사법에 기초한 적분방정식 해의 빠른 형태를 적용시켰다. 이 논문에서 공식화된 구조보정 영상 원리는 전형적인 해저 석유 저류층 모델에 적용되어 시험 되었다.