• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.42-47
• /
• 2014

A finger-gesture game controller using the single camera is implemented in this paper, which is based on the recognition of the number of fingers and the index finger moving direction. Proposed method uses the CAMShift algorithm to trace the end-point of index finger effectively. The number of finger is recognized by using a double circle tracing method. Then, HSI color mode transformation is performed for the CAMShift algorithm, and YCbCr color model is used in the double circle tracing method. Also, all processing tasks are implemented by using the Intel OpenCV library and C++ language. In order to evaluate the performance of the proposed method, we developed a shooting game simulator and validated the proposed method. The proposed method showed the average recognition ratio of more than 90% for each of the game command-mode.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2013

We compared equilibrium evaporation($E_{equili}$) eddy-covariance($E_{eddy}$) with soil moisture data($E_{SMseries}$) which were measured with a 2 hours sampling interval at three points for a humid forest hillslope from May 5th to May 31th in 2009. Accumulations of $E_{eddy}$, $E_{equili}$ for the study period were estimated as 2.52, 3.28 mm and those of $E_{SMseries}$ were ranged from 1.91 to 2.88 mm. It suggested that the eddy-covariance method considering the spatial heterogeneity of soil evaporation is useful to evaluate the soil evaporation. Method A, B and C were proposed using mean meterological data and daily moisture variation and the computations were compared to eddy-covariance method and equilibrium evaporation. The methods using soil moisture data can describe the variations of soil evaporation from eddy-covariance through simple moving average analysis. Method B showed a good matched with eddy-covariance method. This indicated that Dry Surface Layer (DSL) at 14:00 which was used for method B is important variable for the evaluation of soil evaporation. The total equilibrium evaporation was not significantly different to those of the others. However, equilibrium evaporation showed a problem in estimating soil evaporation because the temporal tendency of $E_{equili}$ was not related with the those of the other methods. The improved understanding of the soil evaporation presented in this study will contribute to the understandings of water cycles in a forest hillslope.

• Journal of Technology Innovation
• /
• v.29 no.4
• /
• pp.1-30
• /
• 2021

Due to the recent development of system semiconductors, technical innovation for the electric devices of the automobile industry is rapidly progressing. In particular, the electric device of automobiles is accelerating technology development competition among automobile parts makers, and the development cycle is also changing rapidly. Due to these changes, the importance of strategic planning for R&D is further strengthened. Due to the paradigm shift in the automobile industry, the Product-Technical Roadmap (P/TRM), one of the R&D strategies, analyzes technology forecasting, technology level evaluation, and technology acquisition method (Make/Collaborate/Buy) at the planning stage. The product-technical roadmap is a tool that identifies customer needs of products and technologies, selects technologies and sets development directions. However, most companies are developing the product-technical roadmap through a qualitative method that mainly relies on the technical papers, patent analysis, and expert Delphi method. In this study, empirical research was conducted through simulations that can supplement and strengthen the product-technical roadmap centered on the automobile industry by fusing Gartner's hype cycle, cumulative moving average-based data preprocessing, and deep learning (LSTM) time series analysis techniques. The empirical study presented in this paper can be used not only in the automobile industry but also in other manufacturing fields in general. In addition, from the corporate point of view, it is considered that it will become a foundation for moving forward as a leading company by providing products to the market in a timely manner through a more accurate product-technical roadmap, breaking away from the roadmap preparation method that has relied on qualitative methods.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.182-196
• /
• 2008

The location estimation using sensor network has been considerably researched. The methods taking the differences of the forms of location estimation between indoors and outdoors into consideration have been studied. While it is possible for outdoor location to be estimated because outdoor location estimation has a consistent distribution during unit period through the value of RSSI(Received Signal Strength Indication) on outdoor location estimation, Indoor location estimation is difficult since multi-path and interference indoors are higher than those outdoors and indoor location estimation can be affected by other factors. In this paper, we revise the information of RSSI changed by multi-path and interference through the Moving Average method and K-means algorithm and propose the method of estimation for the value of RSSI with reliability in the group of signals received during unit period. We also suggest the way to put some weights on fixed nodes in network using a snooping node on location estimation and then evaluate the efficiency of location awareness as compared with the existing method by implementing proposed method on system through the reconfiguration of network.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.111-124
• /
• 1999

The Purpose of this thesis is to develop a vehicle classification algorithm using single Magnetometer detector during presence time of vehicle detection and is to examine a held application from field test. We collected data using Magnetometer detector on freeway and used digital data to change voltage values according to magnetic flux density in analysis. We collected these datum during the presence time and then obtained characteristics from wave form in these datum. Based on these characteristics, We used the following three methods for this a1gorithm :1. Template Matching Method,2. Neural Network Method using Back-propagation Algorithm 3. Complex Method using changed slope points and mixing method 1, 2. Of course, Before processing of over three methods, These data were processed normalizing by 20, 40 of size in only X axis and moving average by 0, 3, 4, 5 of size. Vehicle classification were Processed in three steps ; 2, 3, 5 types classification. In 2 types vehicle classification, recognition rate is 83% by template matching method.

• Journal of Korea Water Resources Association
• /
• v.39 no.8 s.169
• /
• pp.691-702
• /
• 2006

This study introduced a method to evaluate the probability of a specific area to be affected by a drought of a given severity and shows Its potential for investigating agricultural drought characteristics. The method was applied to South Korea as a case study. The proposed procedure included Standardized Precipitation Index(SPI) time series, which were linearly transformed by the Empirical Orthogonal Functions(EOF) method. These EOFs were extended temporally with AutoRegressive Moving Average(ARMA) method and spatially with Kriging method. By performing these simulations, long time series of SPI can be simulated for each designed grid cell in whole area. The probability distribution functions of the area covered by a drought and the drought severity are then derived and combined to produce drought severity-area-frequency(SAF) curves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.147-152
• /
• 2005

In this paper, we proposed a method for compressing the static video test patterns in high quality to test the picture quality in DTV. In our method, we use the fact that the generated bits and average quantization value have almost identical distribution characteristics per each GOP and we propose a new target bit allocation method suitable for compressing the static test pattern while the target bit allocation method in MPEG-2 TM5 is suitable for the moving picture. The proposed target bit allocation method is to maintain the high quality video continuously by using the normalized complexities which are updated or maintained by means of picture qualities at each GOP. Experiment result showed that the test pattern stream encoded by MPEG-2 software with the proposed algorithm had a stable bit rate and good video quality during the decoding process.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.143-159
• /
• 2017

For forecasting air cargo demand from Incheon National Airport to all of airports in the United States (US), this study employed the Seasonal Autoregressive Integrated Moving Average (SARIMA) method and the time-series data collected from the first quarter of 2003 to the second quarter of 2016. By comparing the SARIMA method against the ARIMA method, it was found that the SARIMA method performs well, relatively with time series data highlighting seasonal periodic characteristics. While existing previous research was generally focused on the air passenger and the air cargo as a whole rather than specific air routes, this study emphasized on a specific air cargo demand to the US route. The meaningful findings would support the future research.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.167-173
• /
• 2015

Extraction of Finger-end points is one of the most process for user multi-commands in the Hand-Gesture interface technology. However, most of previous works use the geometric and morphological method for extracting a finger-end points. Therefore, this paper proposes the method of user finger-end points extraction that is motivated a ultrared diffused illumination, which is used for the user commands in the multi-touch display device. Proposed air-mouse is worked by the quantity state and moving direction of extracted finger-end points. Also, our system includes a basic mouse event, as well as the continuous command function for expending a user multi-gesture. In order to evaluate the performance of the our proposed method, after applying to the web browser application as a command device. As a result, the proposed method showed the average 90% success-rate for the various user-commands.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.73-80
• /
• 2015

In this paper, we propose the robotic arm control method based on upper extremity electromyogram for lower upper extremity amputation patient. The muscle activity of the forearm flexor, forearm extensor and biceps was analyzed to utilize distribution of muscle activity to a specific position in order to the control input. This control input is converted into a control command for controlling the robotic arm through the algorithm. For the experiment and verify the proposed method, 5DoF robotic arm control system was constructed with 1 channel EMG Module and PC applications through the interworking with each module to perform a three-channel EMG analysis. For accuracy and performance evaluation of control, Experiments were performed with robotic arms moving objects. As a result of experiments which after training for 10 hours by middle 20's man, Validity of the proposed method was evaluated based an average accuracy of 92.5%.