• Journal of architectural history
• /
• v.16 no.5
• /
• pp.41-54
• /
• 2007

The Fagus Factory at Alfeld on the Leine in Germany, which was built in 1911 and 1914, is a well-known and very important object in the history of modern architecture. Alan Colquhoun mentioned that it is "prophetic of the 'objective' (sachlich) Modern Movement of the 1920s". Vittrio M. Lampugnani evaluated it as "a Pioneer building of the architectural Realism". Most of historian of architecture explain that these achievements were accomplished mainly by the master architect Walter Gropius and sometimes by his co-worker Adolf Meyer. Through investigating the background in the planning stage and the process of design it is to try to find out what is truly happened during the project time. Furthermore, historical meanings of the building in the modern architecture is reinterpreted in the following aspects; who or which elements have influence on the Fagus Factory? and what kind of problems can be caused by the digested architectural history?

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1342-1347
• /
• 2011

Advantages of the deeply underground subway are underground space efficiency, high speed, decrease of noise and vibration. However, when fire occurs in the deeply underground subway station, large casualties are occurred like Daegu subway station fire due to the increase of evacuation distance. In this study, a numerical analysis was performed by using the fire and evacuation analysis program FDS+EVAC for smoke movement and evacuation in Beotigogae station among the deeply underground subway station. Heat release rate of carriage fire was set 10MW and the fire growth rate was ultrafast. As a result, the smoke move to the exit at 1085 second. The total evacuation time took 956 second.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.216-220
• /
• 1998

Experimental studies were carried out to investigate water diffusion in unsaturated compacted bentonite for a landfill of hazardous wastes. Water content distributions were measured and water diffusion coefficients were determined when the dry densities of compacted bentonite were in the range of 1.4 - 1.8 g/㎤. Resaturation times were also calculated to analyze the ability of the compacted bentonite to retard water movement. The results obtained were as follows: Diffusion model described properly the water migration in unsaturated compacted bentonite. Water diffusion coefficients ranged from 4.30$\times$10$^{-6}$ $\textrm{cm}^2$/sec to 1.93$\times$10$^{-6}$ $\textrm{cm}^2$/sec, and decreased with increasing the dry density. The dry density of compacted bentonite was found to be an important factor to control the resaturation time by water. This study suggests that the domestic compacted bentonite should be a good barrier material against water movement in a landfill of hazardous wastes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.129-132
• /
• 2008

All bearing device should be examined to determine that they are functioning properly. Small changes in other portions of the structure, such as pier or abutment settlement, may be reflected in the bearings. Bearings should be checked to see that they can move freely and are clear of all foreign material. Shoes should be in proper position relative to the temperature at the time of the inspection. Check anchor bolts for any damage and to see that nuts are secure. See that anchor bolt nuts are properly set on the expansion bearings to allow normal movement. In this paper, rehabilitation method for damaged bearings is proposed and damage example of the skewed bridge is illustrated

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.459-461
• /
• 1992

This paper presents the new method to recognize the 2D patterns dynamically by rotating the input patterns according to the difference vector. Generally neural network with many patterns leads to various recognition ratio. The dynamic management of input patterns means that we can move pixels to desired locations controlled by the difference vector. We divide dual neural network model into two parts at learning phase, respectively. And then we combine them to construct the total network. Our model has some good results such that it has less number of patterns and reduced learning time. At present, we only discuss the four way movement of input patterns. The research for the complex movement will be fulfilled later.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.16-20
• /
• 1988

This paper presents a new algorithm for solving the inverse kinematics in real-time applications. The end-tip movement of each link can be resolved into the basic resolution unit, .DELTA.l, which depends on link length, reduction ratio and resolution of the incremental encoder attached to the joint. When x- and y-axis projection of the end-tip movement are expressed in .DELTA.l unit, projectional increments .DELTA.x and .DELTA.y become -1, 0 or I by truncation. By using the incremental computation with these ternary value and some simple logic rules, a coordinate transformation can be realized. Through this approach, it should be noted that the floating-point arithmetic and the manipulation of trigonometric functions are completely eliminated. This paper demonstrates the proposed method in a parallelogram linkage type, two-link arm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.820-823
• /
• 2003

Recently, the linear motors have been widely used in the industry, owing to various advantages in comparison with conventional feed mechanism; high speed, high acceleration and high stiffness. In addition, the linear motors have the merits of a good velocity control, reversible movement and long lifetime. For the application of the linear motors to vibrating conveyor, the study of vibrating characteristics is required. In this paper, we developed the linear vibrating conveyor using the linear motor that has the 410N thrust and the 7.2m/min maximum moving velocity. To accomplish this system, we had some experiments that included the influence of deceleration time, vibrating amplitude and additional weight.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.259-263
• /
• 1996

In diagnosing of mechanical machinery, it is often improtant to get information about the movement inside the machine casing. If the values of internal tities may be derived from the measurement using sensors installed on the external casing, it would be much better in many senses. This paper discusses extracting internal gear movements byfrequencydemodulation from gear meshing force signatures which can be recovered from the vibrations though inverse filter. There are several way in demodulating signals. In this paper, especially, Hibert Transform, Wigner-Ville distribution, and Teager energy operator are examined and compared. Effects of noise on the frequency demodulation methods and the behavior of bandpass filtered noisy signal are discussed using simulated time-varying frequency signals.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.16-22
• /
• 2018

This paper presents a solution for personal profiling system based on user-oriented tracking. Here, we introduce a new way to identify and track humans by using two types of cameras: dome and face camera. Dome camera has a wide view angle so that it is suitable for tracking human movement in large area. However, it is difficult to identify a person only by using dome camera because it only sees the target from above. Thus, face camera is employed to obtain facial information for identifying a person. In addition, we also propose a new mechanism to locate human on targeted location by using grid-cell system. These result in a system which has the capability of maintaining human identity and tracking human activity (movement) effectively.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.8
• /
• pp.25-32
• /
• 2017

In this paper we propose a resource management method which enables to guarantee the quality of experience (QoE) for handover in the overlaid macro-femtocell networks. How to cope with the resource demand of handover calls is necessary to efficiently support the movement of mobile terminals, the QoE degradation or the load control. We attempt to satisfy the QoE requirements of users and maximize the capacity of the system at the same time. In order to achieve this goal, this scheme divides the shared resources into two part for the movement of MT and QoE degradation, and allocates those resources with the competition between four types of handovers. Simulation results show that our scheme provides better performances than the conventional one with respect to the outage probability, data transmission throughput.