• 대한한의진단학회지
• /
• 제20권2호
• /
• pp.67-75
• /
• 2016

Objectives There was a correlation between respiratory index and Profile of Mood States (POMS). However, no study has examined the relationship between hyperventilation and POMS. Therefore, this study showed differences in POMS subscales and respiratory patterns between hyperventilation group and normal group. Methods 20 healthy men and women were to complete Nijmegen and Korean-Profile of Mood States(K-POMS) questionnaire aimed at subjects (13 men, 12 women). By attaching a capnometer to the nasal cavity portion, end-tidal $PCO_2$ was measured. Also, marker was attached at Zhangmen, Juque, Shuifen. The movement of the marker was taken as a web cam. Statistical analysis Mann Whitney U test was used for the nonparametric methods. Results In the subscale of K-POMS were significant differences(Tension-0.001, Anger-0.007, Fatigue-0.002, Depression -0.004) between the normal group and the group with the hyperventilation. In addition, between the two groups were obtained a significant result(0.046) in the movement of the Shuifen acupoint. Conclusions Nijmegen questionnaire score is higher, the higher negative subscale scores of K-POMS. Also, differences in Nijmegen questionnaire score may help to determine the presence or absence of the abdominal breathing.

• 한국주거학회논문집
• /
• 제23권1호
• /
• pp.27-41
• /
• 2012

The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradiation by opening/closing of a blind. As previous researches on blind controls have limited outdoor environmental conditions to those in specific regions, orientations and dates, these resulted in problems at various conditions for general-purpose application. Major problem is that the time interval and amount of blind movement do not meet the control objective at the end of control zone and discontinuous curve. To overcome these limitations revealed in the previous researches, following tasks were performed in this study. 1) To establish the control objective to accomplish the goal of this study. 2) To develop the control methods and algorithms which prevent glare on the work-plane at any time and which control the time interval and amount of blind movement to follow the control objective at various profile angle curves. 3) To validate the general-purpose applicability and performance of the developed control methods and algorithms by simulation and its data analysis at various conditions. It was found that the proposed methods and algorithms can prevent the direct glare on the work-plane at all the time and also increase the incoming daylight and solar irradiation.

• 한국토양비료학회지
• /
• 제35권4호
• /
• pp.197-206
• /
• 2002

토양수분 이동에 대한 토양 특성과 경운의 영향을 구명하기 위하여 3년 동안 일리노이 중부지방의 몇 개 토양통이 다른 옥수수 포장에서 토양 수분함량을 조사하였다. 경작 기간중의 무경운과 경운된 포장에서 30 cm 간격으로 깊이 150 cm 까지 Neutron Scattering 기술에 의하여 수분함량을 측정하였다. 토양 경작층에서의 수분함량은 경운이나 강우에 의해 수분함량의 영향을 받은 반면 심토에서는 토성에 의해 영향을 받았다. 토양수분은 점토 함량이 상대적으로 낮은 Saybrook통이나 Catlin통에서 점토 함량이 높아 수분 보유능이 높은 Drummer통, Flanagan통, 및 Ipava통보다 빠르게 이동하였다. 이들 Drummer통, Flanagan통, Ipava통의 높은 유기물 함량은 수분 보유능을 증가시키는 또 다른 이유가 될 수 있다. 또한 옥수수 경작층에서의 수분함량은 경운 포장에서 무경운 포장보다 높았다.

• 소음진동
• /
• 제9권3호
• /
• pp.613-620
• /
• 1999

디스크 두께 변화(DTV)에 의해 야기되는 져더현상은 일반적으로 차체진동, 브레이크 페달 떨림, 그리고 스티어링 휠의 떨림에 의해 감지된다. 이번 연구에서는, 차수분석 및 Operational Vibration Analysis(OVA)를 통해 차체진동이 DTV profile에 의해 어떻게 영향을 받는지를 중점적으로 조사하였다. 진동 측정위치는 knuckle, lower arm, lower arm 연결 차체부위이고, 져더 발생 DTV profile도 실측하였다. 시험 분석 결과, DTV는 져더현상에 차수별 상대적인 방향 기여도를 나타내며 특히 디스크 회전 2차 성분은 차량진행 방향으로의 lower arm 진동을 현저하게 야기시키는 것으로 나타났다. 이러한 시험 및 분석 기술은 져더 현상을 진단하고 문제를 개선하는데 유효하리라고 예측된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.26-31
• /
• 2007

A novel scanning probe measurement system was developed to enable precise profile measurements of microaspheric surfaces. An air-bearing stylus with a microprobe was used to perform the surface profile scanning. The new system worked in a contact mode and had the capability of measuring micro-aspheric surfaces with large tilt angles and complex profiles. Due to limitations resulting from the contact mode, such as possible damage caused by the contact force and lateral resolution restrictions from the curvature of the probe tip, several system improvements were implemented. An air bearing was used to suspend the shaft of the probe to reduce the contact force, enabling fine adjustments of the contact force by changing the air pressure. The movement of the shaft was measured by a linear encoder with a scale attached to the actual shaft to avoid Abbe errors. A $50-{\mu}m-diameter$ glass sphere was bonded to the tip of the probe to improve the lateral resolution of the system. The maximum contact force of the probe was 10 mN. The shaft was capable of holding the probe continuously if the contact force was less than 40 mN, and the resolution of the probe could be as high as 10 nm, The performance of the new scanning probe measurement system was verified by experimental data.

• 대한기계학회논문집B
• /
• 제40권5호
• /
• pp.313-319
• /
• 2016

액체가 부분적으로 채워져 있는 용기에서 발생하는 슬로싱 현상을 이해하고 이를 효과적으로 제어하는 것은 매우 중요하다. 선행 연구들이 대부분 사인파형(sinusoidal) 가진에 의한 슬로싱 및 공진 현상에 관심을 가진 반면, 본 연구에서는 산업 현장에서 액체 용기를 빠르게 이송시킬 때 발생하는 슬로싱을 이해하고 억제하고자 하였다. 즉, 사각 용기를 수평방향으로 빠르게 이송시킬 때 발생하는 2상 유동을 수치해석으로 구한 후, 용기의 속도 프로파일(특히 가속 및 감속 시간)이 슬로싱에 미치는 영향을 분석하였다. 그 결과 용기의 가감속 시간이 1차 모드 고유주기의 정수배가 될 때 슬로싱이 상당히 억제되는 것을 관찰하였고, 이는 슬로싱 억제 방안으로 활용될 수 있을 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.442-449
• /
• 2000

Before the complete construction of new high-speed line between Seoul and Pusan, KTX is going to operate on both new high-speed line between Seoul and Daegu and electrified conventional lines between Daegu and Pusan. Then, the wheels of KTX are going to operate on various rails such as KS50N and KS60 of conventional line as well as UIC60 of high-speed line. Also, conventional line will have a mixed traffic mode with various types of trains operating on it, such as Saemaul and Mugunghwa. Hence, this study reviews the wear phenomena of wheels and rails in geometrical point of view by comparing their profiles. The analyses of the results show that because UIC60 rail is designed for KTX, KS50N rail whose profile is similar to that of UIC60 will not have any impact on the shape of wheel wear. On the other hand, KS60 rail is expected to have partial wear on both the flange of KTX wheel and the gauge corner of the rail in the initial stages. However, the operation of the trains whose wheels have 1/20 conicity will cause partial sidewear on the inside of the rail and the movement of the contact point between KTX wheel and the rail toward the inside of the track. As a result, the flange wear of KTX wheel will be reduced and the formation of wear-equilibrium profile will be faster.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.407-412
• /
• 2000

In this study, a research for process design in bending of structural frame of AA6061-T6 with rubber pad was conducted. In this process, the conventional lower die made of metal is replaced with a polyurethane pad, resulting in high flexibility during bending. Vulcanized polyurethane rubber with shore A hardness of 60 was used for the pad. Experiments on a newly developed bending machine were carried out by controlling the stroke of the roller and horizontal movement of roller pad lower die. From this, the relation between roller path and geometry of the materials bent was obtained for the process design of producing roof rail part of a passenger car and the experimental result was compared with the target profile. For more accurate process design, it is required to control the roller path interactively. Based on the experience in developing the prototype bending machine, it is construed that a fully automated bending system with rubber pad to produce various light-weight components for automotive body frames can be successfully developed.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.103-114
• /
• 2011

During a wearer's movement, the apparel fabric layers collide each other in a highly complicated manner. The collision involves cloth-cloth, and cloth-body collision. The diversity of the textile fabrics, including silk, wool, cotton, and other synthetic fibers, together with the complex details of the apparel construction, makes the collision and other calculation procedure involved in the 3-dimensional clothing software system much more complicated. Therefore, there is a need to measure the behavior of the fabrics during the fabric collision cycles. In this study, as a first step, static measurements pertinent to the factors governing the appearance of the apparel fabrics were implemented. The drape profile, stiffness(Sd and Sf), tensile properties, thickness, and the air permeability were measured. The correlation between the parameters were calculated and reviewed. It is found that there is a high correlation of 0.97 between the actual fabric drape parameters and the 3D virtual fabric drape parameters. The measured drape coefficients of the fabrics show relatively good correlation with the measured fabric stiffness.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.277-286
• /
• 2013

Cross-shore sediment transport is very important factor in the design of coastal structures, and the beach profile is mainly affected by a number of parameters, such as wave height and period, beach slope, and the material properties of the bed. In this study cross-shore sediment movement was investigated using a physical model and various offshore bar geometric parameters were determined by the resultant erosion profile. The experiments on cross- shore sediment transport carried out in a laboratory wave channel for initial base slopes of 1/8, 1/10 and 1/15. Using the regular waves with different deep-water wave steepness generated by a pedal-type wave generator, the geometrical of sediment transport rate and considerable characteristics of beach profiles under storm conditions and bar parameters affecting on-off shore sediment transport are investigated for the beach materials with the medium diameter of $d_{50}$=0.25, 0.32, 0.45, 0.62 and 0.80 mm. Non-dimensional equations were obtained by using linear and non-linear regression methods through the experimental data and were compared with previously developed equations in the literature. The results have shown that the experimental data fitted well to the proposed equations with respect to the previously developed equations.