• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.292-299
• /
• 2018

The vehicle exterior design is the main parameter of aerodynamic wind noise, but the modification of it is nearly impossible at a proto-type stage. Therefore, it is very important to verify exterior design and estimate the correct wind noise level at the early vehicle design stages. The numerical simulations of aerodynamic wind noises around A-pillar and wiper were developed for specific vehicle exterior designs, but could not be directly used for the discussions with designers because these need complex modeling and simulation process. This study proposes new approach to A-pillar and wiper wind noise estimation at design stage using response surface methodology of modeFRONTIER, of which database is composed of PowerFLOW simulation, PowerCLAY modeling, SEA-Baced (Statistical Energy Analysis-Based) interior noise simulation, and turbulent acoustic power simulation. New design parameters are defined and their contributions are analyzed. A state-of-the-art, easy and reliable CAT (Computer Aided Test) tool for A-pillar and wiper wind noise are acquired from this study, which shows high usefulness in car development.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.363-372
• /
• 2006

The aim of this study is to shed light on the importance of female drivers, study their characteristics and needs, and create automobile designs in accordance with the study. The power of female consumers is greatly increasing in a modern society, To the extent that women became the core consumers. Companies are now turning their attention to female consumers in order to survive the fierce competition in the saturated markets. Moreover, it is becoming imperative for companies to actively develop products and services in female perspectives to meet the diversified needs of consumers. It is forecasted that vigorous research, analysis and understanding of the unique culture of women will be increasingly important now that women are emerging as core consumers. Only the companies that makes such efforts consistently can dominate the market. The automobile industry is not an exception. The world's major automobile companies including Volvo and Ford Motor Co. are keenly focusing on automobile exterior and interior designs for women. Korean companies are also designing cars that cater to women, starting with Lanos and Juliet of Daewoo Motors in 1998, yet specific and systematic research on the subject has not been made. This study aims to emphasize the power of female users, make a research and analysis on their needs and characteristics, and suggest car interior designs that cater to them.

• Composites Research
• /
• v.37 no.1
• /
• pp.7-14
• /
• 2024

Due to the structural characteristic of a double roller, the double roller can have various deformation behaviors depending on a gap block design, even if dimensions and loading conditions for the double roller are the same. Based on this feature, we propose a strategy for designing the gap block of the carbon-fiber reinforced plastic (CFRP) double roller to minimize defects (e.g., sagging and wrinkling), which can be raised during the product conveying process, with the pursue of the lightweight design. In the suggested strategy, analysis cases are first selected by considering main design parameters and engineering tolerances of the gap block, and then deformation behaviors of these selected cases are extracted using the finite element method (FEM). Here, to obtain the optimal gap block parameters that satisfy the purpose of this study, deformation deviations in the contact area are calculated and compared using the extracted deformation behaviors. Note that the contact area in this work is located between the product and the roller. As a result, through the design method of the gap block proposed in this work, it is possible to construct the CFRP double roller that can significantly decrease the defects without changing the overall sizes of the roller. A detailed method is suggested herein, and the results are evaluated in a numerical way.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.788-794
• /
• 2009

Various types of latch designs for hard disk drives using load/unload mechanism have been introduced to protect undesired release motions of a voice coil motor(VCM) actuator from sudden disturbances. Recently, various inertia-type latches have been widely used because locking performance is better than that of other types of latch. However there has been a limit in the inertia type in order to guarantee perfect latch and unlatch operations because of changes in latch/unlatch conditions due to mechanical tolerance and temperature-dependent friction. In this paper, a reliable and robust magnetic latch mechanism is proposed through only simple modifications of coil and yoke shapes in order to overcome the mechanical limit of current inertia-type latches. This new magnetic latch does not have only a simple structure but it also ensures reliable operations and anti-shock performance. The operating mechanism of the proposed latch is theoretically analyzed and optimally designed using an electromagnetic simulation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.302-307
• /
• 2010

Development of light-weight high speed train (HST) based on distributed motor control with the top speed of 350 km/hr has engendered a need for abatement of the interior noise of the train cabin. The development of noise abatement measures is crucial at the design stage of the train car since the noise transmission characteristics of the car structure directly influences the cabin interior noise. Since the transmission loss measurement using the entire car structure is often not feasible, especially at the initial stages of the train development, investigation of transmission characteristics using small-scale reverberation chamber can furnish useful alternative source of predicting the noise level. In the present study, white noise is generated at source and transmission loss estimated by performing measurement of a specimen in a scaled reverberation chamber. Comparison of measured values with the previously derived numerical values show good agreement in the overall trend but appreciable quantitative differences still remain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.520-526
• /
• 2013

This article presents the reduction of vibration generated by an automobile fuel pump. In order to analyze the vibration of the fuel pump, a simplified dynamic model is established, which is composed of a rigid rotor and a equivalent springs. The equivalent stiffnesses of the upper and lower assemblies are evaluated by the comparison of modal testing results and the finite element analysis. The stiffness for the oil film of the journal bearing is extracted by using Reynold's equation. In addition, the time responses for the vibration of the fuel pump are computed by using a commercial multi-body dynamics software, RecurDyn. Based on these results, some design suggestions are proposed to reduce the vibration of an automobile fuel pump.

• Research in Community and Public Health Nursing
• /
• v.26 no.4
• /
• pp.405-414
• /
• 2015

Purpose: The purposes of this study were to examine the effects of home visit healthcare using a complex program on community-dwelling frail elders' physical strength, frailty, and depression and to compare the effects among three regions. Methods: This study was conducted as a quasi-experimental study using one-group pretest-posttest design. A total of 86 subjects were sampled from three regions (metropolis, small city, and rural area). The program was applied for 14 weeks. This program consisted of disease management by a visiting nurse, exercise with a visiting nurse, self exercise, telephone monitoring, health education, counseling, providing handbook, and incentive. Physical strength was measured by balance, upper-limb, and lower-limb muscle strength. Frailty was measured by the Korean Frail Scale and depression was measured by the Geriatric Depression Scale. Paired t-test and ANCOVA were used to analyze the effects. Results: Physical strength, frailty, and depression were significantly improved after applying the complex program. There were not differences among the regions. Conclusion: Home visit healthcare using a complex program was effective in improving frail elders' physical strength, frailty, and depression. There were not differences among the regions. Therefore, home visit healthcare using a complex program needs to be expanded to other regions.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2009

In this paper, when wheelchair user get into the vehicle, we have thorough grasp of the problems of loading wheelchair and give effect to suggest conceptual design in relation to develop manufactured goods. We choose 50 participants with disabilities who manual wheelchair or motor scooter users are able to drive own's vehicle, and the method practice in the direct survey. There are some limitations in this study especially in terms of the sampling population. The 88%(n=44) of the participant replied to the driver with disabilities need assistive devices for loading manual wheelchair. They prefer a system that robot arm brings the wheelchair out of the trunk to the driver's seat door.

• Physical Therapy Rehabilitation Science
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2012

Objective: Dual-task walking deficits impact functional daily life, which often requires walking while performing simultaneous tasks such as talking, thinking or carrying an object. This study is to find out the latest trend of dual-task training's influence on ambulatory abilities of a stroke patient. Design: Systematic review of randomized controlled trials. Methods: This literature review was conducted in Pubmed and Sciencedirect with the follwing key words:stroke, cerebro-vascular accident, hemiplegia, gait, rehabilitation, exercise. 7 studies were chosen in findings by search tool. 3 studies were case study, 3 studies were cross sectional observational study and 1 study was randomized controlled trial. Results: It was found that stroke patients have difficulties in doing 2 motor tasks simultaneously and when they do 2 tasks, one is done in a naturally preferred activity areas. Moreover, when simply applying dual-tasks, the walking speed decreased. Meanwhile, when applying them through training, the speed increased. This showed the improvement of effective task-implementation abilities after dual-task training using task-integration models. Conclusions: In the beginning of the 2000s, dual-tasks were implemented by simply combining walking and cognition or exercise task, and the results of this study suggest that subjects with stroke have difficulty performing dual task. However, the latest trend is to let patients do the dual-task training by combining it with virtual reality. Therefore, dual task training could be performed in a safe in the environment such as virtual reality or augment reality.