• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Korean Journal of Acupuncture
• /
• v.23 no.2
• /
• pp.89-103
• /
• 2006

Objectives: Recently, the effect of acupuncture has been approved not only in the East but also in the West, so the interest on acupuncture was greatly improved. Especially, functional magnetic resonance imaging(fMRI) was embossed as the study tool for the mechanism of acupuncture noninvasively and many studies on the mechanism of acupuncture using fMRI were carried out. We archived the fMRI study on the brain activity induced by manual acupuncture at BL62(申脈). Methods: The study was the acupuncture at BL62(申脈) and we acquired 9 fMRI results from 6 persons$(age\;20{\sim}30,\;4\;male\;and\;2\;female)$. These studies employed The block design for mapping brain activity and acupuncture was perfomed at BL62(申脈) on the left foot. Results: The brain related motor function was cerebellum, basal ganglia and cerebral cortex and thalamus connected these elements. In the result of this study, the regions of significant activation in the cerebellum was centered on the spinocerebellum in the anterior lobe, so we presumed that this result showed the input of stimulation by the acupuncture on BL62(申脈). But basal ganglia and cerebral cortex showed the regions of significant activation in the left larger than the right and regions of the cerebral cortex was the motor and sensory cortex. Such a result explained that acupuncture at BL62(申脈) could have influence the motor function and acupuncture at left BL62(申脈) could affect the right side through the activation of the left basal ganglia and cerebral cortex. Conclusions: In the theory of crossing needling at collaterals(繆刺論), it the pathogenic factor invaded in the Yang Heel channel(陽?脈) that was one of the eight Extra meridians(奇經八脈), we recognized the disease of the collateral channel and used contralateral BL62(申脈) for treatment of the Yang Heel channel(陽?脈). Moreover the result of this study could bear the construction that acupuncture at the left BL62(申脈) treats the contralateral lesion and this construction is related to the theory of crossing needling at collaterals(繆刺論).

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.354-360
• /
• 2011

Objective: To investigate the effects of different pilot-drilling methods on the biomechanical stability of self-tapping mini-implant systems at the time of placement in and removal from artificial bone blocks. Methods: Two types of artificial bone blocks (2-mm and 4-mm, 102-pounds per cubic foot [102-PCF] polyurethane foam layered over 100-mm, 40-PCF polyurethane foam) were custom-fabricated. Eight mini-implants were placed using the conventional motor-driven pilot-drilling method and another 8 mini-implants were placed using a novel manual pilot-drilling method (using a manual drill) within each of the 2-mm and 4-mm layered blocks. The maximum torque values at insertion and removal of the mini-implants were measured, and the total energy was calculated. The data were statistically analyzed using linear regression analysis. Results: The maximum insertion torque was similar regardless of block thickness or pilot-drilling method. Regardless of the pilot-drilling method, the maximum removal torque for the 4-mm block was statistically higher than that for the 2-mm block. For a given block, the total energy at both insertion and removal of the mini-implant for the manual pilot-drilling method were statistically higher than those for the motor-driven pilot-drilling method. Further, the total energies at removal for the 2-mm block was higher than that for the 4-mm block, but the energies at insertion were not influenced by the type of bone blocks. Conclusions: During the insertion and removal of mini-implants in artificial bone blocks, the effect of the manual pilot-drilling method on energy usage was similar to that of the conventional, motor-driven pilot-drilling method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.379-385
• /
• 2017

In general, distribution board, panel board and motor control center can be installed over a wide area such as residence of group, building, schools, factories, ports, airports, water service and sewerage, substation and heavy industries that are used to supply converts the voltages extra high voltage into optimal voltage. There are electrical accidents due to rise of contact temperature, loose contact between busbar, deterioration of the contact resistance, over temperature of the busbars. In this paper, we designed and implemented the busbar joint and temperature measurement system, which can measure the joint resistance of busbar and loose connection between busbar using potentiometer and non-contact infrared sensor. The experimental results show that tightening the bolt and nut is fully engaged, resistance was decreased and maximum error range was 0.1mm. Also, the experimental result showed that the temperature at the contact area is increased from $27.3^{\circ}C$ to $69.3^{\circ}C$by the contact resistance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.74-80
• /
• 2005

This paper presents a misfire monitoring method by using the weight factor. According to OBD II(On-Board Diagnostics) regulations of the CARB (California Air Resources Board), an ECU (Electronic Control Unit) should detect misfires which occur in the internal combustion engine. A misfire is 1311owe4 by post-oscillations for short duration. Sometimes, the amplitude of oscillations may be as high as misfire and can be falsely detected as another misfire. To prevent this, the software designers do not attempt to detect another misfire for this short duration, during which the post oscillations exist. Because of this, ECU does not detect all the misfires and hence, the unstable state of automobile cannot be detected. If this happens for a long time, automobile may get damaged. To solve these problems, this paper suggests a new algorithm to detect misfire by using weighting factor Weighting factor is a concept to distinguish the misfire with the post oscillation and to improve the detection rate. This value of weighting factor is used for counting the misfire. This paper also shows the result of experiment done on a automobile using this software. The software is implemented using ASCET-SD which is preferred in the design of engine control. This paper's result show the possibility of improving the misfire detection by implementing this algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.506-510
• /
• 2004

A torque transmission system composed of several gears and couplings is flexible. In order to get an exact response of motor, the torsional vibration due to an unexpected change of motor speed must be suppressed. Therefore, it is very important that motor control suppress vibration. Various methods to control it including dual inertia system are proposed. Specially, the method of vibration suppression is that vibration can be suppressed to fee㏈ack the estimated torsion torque via the disturbance observer filter being of normal filter. The suitable Proportional controller and coefficient parameter can be designed using CDM and the torsional vibration also be suppressed, but it has a low degree of adaptability to disturbance. The PID controller can be designed easily, but makes the excessive overshoot and oscillation for system response in the early period. To resolve these problems, simple and practical PID controller with two degree of freedom is proposed recently that it ran improve performance of obeying the reference unconcerned in any disturbance by changing the proportional gain by two degree of freedom parameter. But it has also the defect that parameter a must be changed to obtain the ideal Proportional parameter. On this paper, we design the controller which automatically adjusts parameter u using fuzzy Algorithm to overcome such defects. Also, we compare the proposed method with established one and evaluate them to confirm performance of the designed controller.

• The Journal of Korean society of community based occupational therapy
• /
• v.8 no.3
• /
• pp.59-67
• /
• 2018

Objective : This study was conducted to investigate the effects of occupation-based group cooking program on executive function for children in community children's center. Methods : The children who participated in the study were 7 to 9 years old. This study was based on a one-group pre-posttest design, which the group cooking program included making of sandwiches, frog-shaped hamburgers, patbingsu, sausage gimbap, and flowerpot cupcake. This study consisted of five activity sessions, which each session lasted for 120 minutes. Effectiveness of the program was measured by using the STROOP Color and Word Test, Children's Color Trails Test and Assessment of Motor and Process Skills. Results : The differences between pre and posttest scores on STROOP Color and Word Test and the process skill score of Assessment of Motor and Process Skills were statistically significant. There was no difference significantly between pre and posttest scores in Children's Color Trails Test-2. Conclusion : This study demonstrated that the group cooking program intervention has effects on cognitive inhibition executive function and performance executive function of children in the community children's center. This study suggests that occupation-based intervention can be applied to various clients in the community setting.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2023

Objective : The purpose of this study is was to find ouetermine whether training to applying vibration stimulation to the biceps brachii of children in the late stages of spasticity hemiplegic cerebral palsy can helps to improve the function of the upper extremity. Methods : This The study was conducted on with three children with cerebral palsy, all between the ages of 13 and 15 years. Among the experimental research methods of used with individual subjects, an AB research design using multiple basic baseline individual experimental studies was used, and vibration stimulation was provided to the paralyzed hand during the intervention period. The An evaluation was conducted before and after each session used to measure the function of the upper extremity using was conducted after each session of the Rapael Smart Board and The Jebsen-Tayler hand function test and the Motor Activity Log (MAL) were conducted before and after the experiment. Results : As a result of measuring the smooth The average score and total scores of for using the Rapael Smart Board to measure the upper extremity function in following each therapeutic session using the Rafale smart pegboard showed that, Subject 3 did not showevidenced a no significant change in the average value, and but Subjects 1 and 2 did showed a significant changes in their average values. All three subjects showed significant changes in the Jepson-Taylor hand function test and in the Motor Activity Log test, as evaluated before and after the intervention. Conclusion : Training The using use of vibration stimulation showed a positive effect on in improving upper limb function and exercise in hemiplegia hemiplegic children with who had little experience on using their hemiplegic side.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.39-53
• /
• 2023

Objective : The purpose was the effect of sensory integration therapy combined with an eye tracker on the sensory processing and visual perception of children with developmental disabilities. Methods : It was a single-subject study with a multiple baseline design between subjects, and the intervention applied sensory integration therapy combined with an eye tracker. Visual-motor speed and saccadic eye movements were assessed at each session of baseline and intervention periods. As pre- and post-evaluation, sensory profile, Korean-Developmental Test of Visual Perception and Trail Making Test were conducted. The results of each session evaluation and pre- and post-evaluation researched the effectiveness of the intervention through visual analysis and trend line analysis. Results : As a result of the evaluation for each session, the slope of the trend line for all children in visual-motor speed and saccadic eye movement increased sharply during the intervention compared to the baseline. As a result of the pre- and post-evaluation, the sensory processing of movement, body position, and visual changed from more than that of peers to a level similar to that of peers. In visual perception, all children's ability of Visual Closure increased. As a result of Trail Making Test conducted to confirm the improvement of children's visual tracking and visual-motor abilities, all children showed a decrease in performance time after the test compared to before. Conclusion : It was confirmed that sensory integration therapy combined with an eye tracker for developmental disabilities has effect on sensory processing and visual perception. It is expected to play an important role clinically as it can stimulate children's interest and motivation in line with recent technological improvements and the spread of smart devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.672-680
• /
• 2018

The opening angle of the duct cap assembly during the operation of a refrigerator ice dispenser was evaluated by transient structural analysis, and an improved design to maximize the opening angle was obtained. The opening angle of the existing design was found to be 78% of the upper limit. Several design modifications were proposed and analyzed to examine the effects of the design factors on the opening angle. As a result of the design modifications, the opening angle was improved by changing the lever material to a material with a high elastic modulus, moving the position of the support to the motor side, or increasing the lever shaft diameter. Considering the manufacturing cost of the new design, the design modification changing only the lever material was found to be the best because it does not require a change in the structure of the ice dispenser case. In conclusion, the opening angle can be improved by up to 95% of the upper limit value if the lever material is changed to an aluminum alloy. The methods and results presented in this study were found to be of great help in designing the duct cap assembly structure to facilitate the discharge of ice.