• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.71-73
• /
• 2011

다기능 선박조종시뮬레이터(Full-mission Shiphandling Simulator)는 항해사, 선장 및 도선사의 자질 향상을 위한 교육뿐만 아니라 항만개발을 위한 사전 검토와 해난사고 발생 시, 원인규명을 위한 분석에도 이용되고 있다. 한국해양수산연수원에서는 이러한 목적을 위하여 2011년 2월 28일 Russia Transas 제품의 선박조종시뮬레이터를 설치 완료 하였다. 이 FMSS는 적어도 360도의 수평시각을 가진 대형 구형화면에 여섯(6) 자유도 운동을 하는 본선 및 타선을 실시간으로 표현하는 photo-realistic high resolution computer graphic visual system과 같은 최신기술을 사용하는 가장 현대화된 최고급 해상용 시뮬레이터로 해난 사고 윈인규명을 위한 분석 연구 목적을 위하여 광범위한 출처로부터 모델시험과 자료의 신뢰할만한 공식적 기록들에 근거한 매우 정확한 수력학적 선박 모델링 소프트웨어로 이루어졌다. 여기서는 이 FMSS의 형태와 복잡성을 상세하게 소개한다.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.265-272
• /
• 2001

The human arm is modeled by three rigid bodies(the upper arm, the forearm and the hand)with seven degree of freedom(three in the shoulder, two in the elbow and two in the wrist). The objective of this work is to present a method to determine the three-dimensional kinematics of the human elbow joint using a magnetic tracking device. Euler angle were used to determine the elbow flexion-extension, and the pronation-supination. The elbow motion for the various driving conditions is measured through the driving test using a simulator. Discomfort levels of elbow joint motions were obtained as discomfort functions, which were based on subjects' perceived discomfort level estimated by magnitude estimation. The results showed that the discomfort posture of elbow joint motions occurred in the driving motion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.311-314
• /
• 1995

Biped locomotion can be simply modeled as a linear inverted pendulum mode. This model considers only the CG (center of gravity) of the entire system. But in real biped robot systems, the free-leg motion dynamics is not negligible. So if its dynamics is not considered in designing the reference CG motion, it is badly influence to the ZMP(zero moment point) position of the biped robot walking in the sagittal plane. Therefore, we modeled the biped locomotion similar to the linear inverted pendulum mode but considered the predetermined free-leg dynamics. To verify that the proposed biped locomotion is more stable than the linear inverted pendulum mode, we constructed a biped robot simulator and designed a serco controller to track both the reference motion of the free leg and the reference motion of CG of the biped robot using the computed torque control low. And through simulations, we verified that the proposed walking is better in stability than the one based on the linear inverted pendulum mode.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.5
• /
• pp.64-68
• /
• 2011

The motion responses of a 5-MW floating offshore wind turbine were simulated in regular and irregular waves and its RAOs and significant motion responses were calculated, respectively. The floating offshore wind turbine employed in this simulation was the OC3-Hywind designed by the National Renewable Research Laboratory, USA. The numerical simulation was carried out using MOSES (Multi-Operational Structural Engineering Simulator), which is widely used to analyze and design floating offshore structures in the gas and oil industry.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.185-202
• /
• 2005

In this research, to get over restrictions of a field expreiment, we modeled a planning road through the 3D Virtual Reality and achieved data about dynamic response related to sector fluctuation and about driver's visual behavior on testers' driving the Driving Simulator Car with Eye Camera. We made constant efforts to reduce the non-reality and side effect of Driving Simulator on maximizing the accord between motion reproduction and virtual reality based on data Driving Simulator's graphic module achieved by dynamic analysis module. Moreover, we achieved data of driver's natural visual behavior using Eye Camera(FaceLAB) that is able to make an expriment without such attaching equipments such as a helmet and lense. In this paper, to evaluate the level of road's safety, we grasp the meaning of the fluctuation of safety that drivers feel according to change of road geometric structure with methods of Driving Simulator and Eye Camera and investigate the relationship between road geometric structure and safety level. Through this process, we suggest the method to evaluate the road making drivers comfortable and pleasant from planning schemes.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1379-1394
• /
• 2002

In case of a single input single output (SISO) system with a nonlinear term, a signal compression method is useful to identify a system because the equivalent impulse response of linear part from the system can be extracted by the method. However even though the signal compression method is useful to estimate uncertain parameters of the system, the method cannot be directly applied to a unique system with hysteresis characteristics because it cannot estimate all of the two different dynamic properties according to its motion direction. This paper proposes a signal compression method with a pre-processor to identify a unique system with two different dynamics according to its motion direction. The pre-processor plays a role of separating expansion and retraction properties from the system with hysteresis characteristics. For evaluating performance of the proposed approach, a simulation to estimate the assumed unknown parameters for an arbitrary known model is carried out. A motion platform with several single-rod cylinders is a representative unique system with two different dynamics, because each single-rod cylinder has expansion and retraction dynamic properties according to its motion direction. The nominal constant parameters of the motion platform are experimentally identified by using the proposed method. As its application, the identified parameters are applied to a design of a sliding mode controller for the simulator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3574-3580
• /
• 2009

An embedded motion controller supporting the PLC programming environment based on the IEC 61131-3 International Standard Language was developed in this paper. In this developed motion controller, the CoDeSys, one of the IEC61131-3 development tools, was embedded in order to support that of PLC as well as the development environment of the PC, and the various function blocks based on PLCopen standard for motion control such as the linear and circular interpolation control were implemented. Moreover, the ethernet based remote control on real-time operating system and the motion simulator for a motion programmer were implemented.

• Journal of Korea Game Society
• /
• v.14 no.4
• /
• pp.87-94
• /
• 2014

In recent years, there has been an increasing interest in tangible sports simulators with the success of golf simulator. The main purpose of this study is to develop a tangible snowboard simulator for the beginner using virtual reality technology. This paper proposes an interactive virtual coach and high fidelity virtual environment for snowboard training. The virtual coach offers an intuitive guidance and personalized coaching feedback about the 5 fundamental riding skills. The virtual training environment uses the stereoscopic display system and motion platform to create more realistic training situation. We expect virtual reality will be used as a training aids in many sports such as taekwondo, baseball, archery and so on.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.1-16
• /
• 2001

In view of the fact that marine casualties have more often occurred recently, there is a need for ship-handling simulator as a useful tool for maritime training, safety assessment and so on. Moreover various kinds of hull forms have appeared for the purpose of improving ship manoeuvrality. Therefore ship-handling simulator is in need of a database for various ships, and it can make diverse maneuvering simulations possible to apply respective mathematical model to ship-handling simulator. In this paper, we adopted twin-screw and twin-rudder ship and discussed mathematical model of maneuvering motions for her. It was discussed from the viewpoint of hull damping forces at low advance speed and interaction between hull, propeller and rudder. Using this model, maneuvering motion of twin-screw and twin-propeller ship was simulated numerically and her principal manoeuvrability was examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.945-946
• /
• 2010