• Structural Engineering and Mechanics
• /
• 제22권6호
• /
• pp.647-664
• /
• 2006

The main purpose of this paper is to investigate the effect of transient stochastic analysis on nonlinear response of earth and rock-fill dams to spatially varying ground motion. The dam models are analyzed by a stochastic finite element method based on the equivalent linear method which considers the nonlinear variation of soil shear moduli and damping ratio as a function of shear strain. The spatial variability of ground motion is taken into account with the incoherence, wave-passage and site response effects. Stationary as well as transient stochastic response analyses are performed for the considered dam types. A time dependent frequency response function is used throughout the study for transient stochastic responses. It is observed that stationarity is a reasonable assumption for earth and rock-fill dams to typical durations of strong shaking.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.17-26
• /
• 2000

This paper presents a case study with a multi-degree-of-freedom (MDOF) system where the Floor Response Spectra (FRS) have been derived from a large ensemble of ground motion accelerograms. The FRS are evaluated by the frequency response function which is calculated numerically. The advantage of this scheme over a repetitive time-history analysis of the entire structure for each accelerogram of the set has been highlighted. The present procedure permits generation of FRS with a specified probability of exceedence.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.33-42
• /
• 2021

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.271-271
• /
• 2019

선체운동은 외력관계 등 복잡한 환경에서 발생하므로 추정이 난해하다. 선체운동의 추정은 선박의 안전을 확보할 수 있는 중요한 요소이므로 정확한 추정이 필요한 실정이다. 기존의 선체운동관련 연구는 특정 선형에 대한 선체운동을 실험하여 획득한 모델과 기준이되는 모델의 겉보기 운동을 비교한 것으로 선체운동을 직관적으로 추정하기 난해하다. 본 연구에서는 선형-시불변 (Linear-Time lnvariant)시스템의 전달함수 기법을 적용해 선체운동을 극-영점 해석과 주파수 응답 분석을 통해 선체운동의 특성을 전달함수로 추정하는 개념을 소개한다. 선형-시불변 시스템을 이용한 선체운동 해석 모델은 1)파랑의 입력신호와, 2)선체운동의 출력신호, 3)블랙박스로 정의된 선체로 구성된다. 본 모델은 선체운동을 전달함수로 수치화 하여 정의할 수 있고, 극-영점해석 및 주파수 응답 분석을 통해 선체운동의 특성을 추정하는데 용이할 것으로 기대된다.

• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.63-69
• /
• 2013

Since most merchant vessels are mainly influenced by the added resistance in an actual sea, they could be navigated more efficiently if this added resistance could be precisely predicted and then effectively reduced. In this paper, we have computed the effective horsepower based on the resistance performance in still water and then calculated the added resistance in regular wave in order to estimate a ship's propulsion performance on a voyage. Firstly, we have performed experiments using a model of KCS in a circulating water channel to estimate the flow characteristics around a container ship and the ship's resistance in still water. Then we have calculated the motion response function in regular wave as well as the values for the increase in resistance, and evaluated the ship's motion performance in waves according to the calculated response function. It was found that the resistance in waves increased because the ship's motion response value became larger as the ship's speed increased in the case of head sea. The effect of the added resistance could be reduced by maneuvering the ship to the encounter angle of $120^{\circ}$ in areas of long wavelengths and to head sea in areas of short wavelengths.

• Geomechanics and Engineering
• /
• 제7권2호
• /
• pp.149-164
• /
• 2014

One of the most advanced classes of techniques for ground response analysis is based on the use of Transfer Functions. They represent the ratio of Fourier spectrum of amplitude motion at the free surface to the corresponding spectrum of the bedrock motion and they are applied in frequency domain usually by FFT method. However, Fourier spectrum only shows the dominant frequency in each time step and is unable to represent all frequency contents in every time step and this drawback leads to inaccurate results. In this research, this process is optimized by decomposing the input motion into different frequency sub-bands using Wavelet Multi-level Decomposition. Each component is then processed with transfer Function relating to the corresponding component frequency. Taking inverse FFT from all components, the ground motion can be recovered by summing up the results. The nonlinear behavior is approximated using an iterative procedure with nonlinear soil properties. The results of this procedure show better accuracy with respect to field observations than does the Conventional method. The proposed method can also be applied to other engineering disciplines with similar procedure.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.221-227
• /
• 2023

A rotordynamic system consists of components that undergo rotational motion. These components include shafts, impellers, thrust collars, and components that support rotation, such as bearings and seals. The motion of this type of rotating system can be modeled as two-dimensional motion and, accordingly, the equation of motion for the rotordynamic system can be represented using complex coordinates. The directional frequency response function (dFRF) can be derived from this complex coordinate system and used as an effective analytical tool for rotating machinery. However, the dFRF is not widely used in the field because most previous studies and commercial software are based on real coordinate systems. The objective of the current study is to introduce the dFRF and show that it can be an effective tool in rotordynamic analysis. In this study, the normal frequency response function (nFRF) and dFRF are compared under rotordynamic analysis for isotropic and unisotropic rotors. Results show that in the nFRF, the magnitude of the response is the same for both positive and negative frequencies, and the response is similar under all modes. Consequently, the severity of the mode cannot be identified. However, in the dFRF, the forward and backward modes are clearly distinguishable in the frequency domain of the isotropic rotor, and the severity of the mode can be identified for the unisotropic rotor.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.35-39
• /
• 2015

This study was presented the small action by the budge sonance function. An estimation of budge sonance function was acquired displacements across all condition with a variation of small action. The budge sonance function was to be indicated to express the flow rate of body motion. Their function was suggested an issue of the action condition by budge sonance. This system was proposed a combination of the body motion and small action. The acquired sonance signal was to render the small action of body motion with budge sonance function. The analysis of budge function was generally realized a variation from displacements on the fast body motion. Budge sonance signal of action that vision condition was acquired to a variation of the $Vi-{\beta}_{AVG}$ with $(-4.954){\pm}(-5.42)$ units, that vestibular condition was acquired to a variation for the $Ve-{\beta}_{AVG}$ with $(-2.288){\pm}0.212$ units, that somatosensory condition was acquired to a variation for the $So-{\beta}_{AVG}$ with $(-0.47){\pm}0.511$ units, that CNS condition was acquired to a variation for the $C-{\beta}_{AVG}$ with $(-0.171){\pm}(-0.012)$ units. Budge sonance function was proposed the small action from axial action on body control. We know a body motion response from axial action was not only variation of budge sonance, but also body motion of fast body motion.

• 소음진동
• /
• 제9권4호
• /
• pp.778-784
• /
• 1999

A method for obtaining the motion of an impact system whose primary and secondary system are composed of lumped masses, springs and dampers, and all the contacts are made through spring and damping elements is presented. The frequency response functions derived from the equations of motion and the impulse response functions obtained from the inverse Fourier transform of the derived frequency response functions are used for the calculation of the system responses. The procedure developed for the calculation of displacements and force time-histories was based on the convolution integrals of impulse response functions and forces applied to the systems. Time histories of displacements and contact forces are obtained for the case where a random excitation is applied to a point in the system. Impact statistics such as contact forces and the time between impacts calculated from those time histories is presented.