• Archives of Reconstructive Microsurgery
• /
• 제2권1호
• /
• pp.13-19
• /
• 1993

Although the etiology of $Kienb\"{o}ck's$ disease is clearly related to avascular changes in the lunate, but the actual cause leading to this vascular impairment has remained elusive. Therefore, a great many different surgical procedures have been proposed for the correction of the multiple factors leading to lunate collapse or for the treatment of the lunatomalacia. The treatment modalities includes lunate excision, intercarpal arthrodesis, lunate implant resection arthroplasty, joint levelling operation(e.g ulnar lengthening & radial shortening), pronater quadratus pedicle graft and vascular loop graft. In the period from Jan. 1981 to Dec. 1992, we performed operative treatment in 19 cases of $Kienb\"{o}ck's$ disease. Among them, 6 cases were treated with vascular loop graft. We analysed all patients who were treated with vascular loop graft after followed up of 4 year 6 months, on an average(range from 1 year to 8 year 10 months). The results analysed are as follows, 1. All cases were stage III according to Lichtman's classification. 2. Ulnar variance was -1.5(range$-2{\sim}0$), on an average. 3. The average age of patients were 37.7years old(range 31-41). 4. Postoperatively, there were considerable restoration of range of motion and complete relief of pain in all cases, but continued decrease of grip power in one case. 5. Decreased sclerosis, loss of fragmentation and new bone formation were appeared in the last follow up film, in all cases. The vascular loop graft considered as a useful method for the treatment of the $Kienb\"{o}ck's$ disease.

• 대한족부족관절학회지
• /
• 제8권2호
• /
• pp.166-170
• /
• 2004

Purpose: To evaluate the results of MIPPO (minimal invasive percutaneous plate osteosynthesis) technique for distal tibial metaphyseal fractures. Materials and Methods: It is a retrospective study of 13 patients who were treated by MIPPO technique for distal tibial metaphyseal fractures from Jan. 2001 to Jan. 2003. The average age was 46.7 years and mean follow-up period was 13.3 months. According to AO classification, there were 8 cases of A1, 3 cases of A2, 1 case of B1 and 1 case of C2. One case of A1 was a Gustilo-Anderson type I open fracture and fibular fractures were combined in 12 cases. We applied anatomical reduction and internal fixation for the fibular fractures and internal fixation on the medial side of the tibia by MIPPO technique for distal tibial metaphyseal fractures. Clinical results were evaluated using radiographic results, Neer score, the starting time of postoperative exercise and clinical complications. Results: According to the Neer score, all cases showed satisfactory results. Active ankle ROM was started at average 2.4 weeks ($2{\sim}4$ weeks) and full weight bearing ambulation at average 5.2 weeks ($4{\sim}8$ weeks) postoperatively. Union of fractures was obtained by average 14.4 weeks ($8{\sim}18$ weeks) postoperatively. Two cases showed $5^{\circ}$ limitation of motion without functional deficits and other cases showed satisfactory ROM results. One case had $6^{\circ}$ valgus deformity without functional deficits. There were not any other complications like soft tissue problems and delayed-or non-union. Conclusion: MIPPO technique for the treatment of distal tibial metaphyseal fractures is a feasible technique with a good clinical outcomes.

• 대한물리의학회지
• /
• 제13권3호
• /
• pp.49-60
• /
• 2018

PURPOSE: This study was conducted to investigate the intervention effect obtained by applying an ICF tool to improve the dressing in a patient with rotator cuff syndrome to schematize the problems and approaching with PNF to solve the problems. METHODS: The subject of this study was a 44-year-old patient who underwent surgery after complete right rotator cuff tear. To treat his symptoms, the processes of clinical practice were implemented in the order of examination, assessment, diagnosis, prognosis, intervention, and outcome. During examination, patient information was collected using the ICF core set. In the assessment, the problems were schematized, and an ICF assessment sheet was used to identify the interaction of the problems. The diagnosis was made by clearly describing the causal relationship derived from the assessment in ICF terms. To solve the problems, the intervention was given in the order of indirect, direct, and task based on the philosophy of PNF. To evaluate the outcome, the differences before and after the intervention were compared. Additionally, the comparison for the ICF qualifier is presented with the ICF evaluation display. RESULTS: The results of the study showed clinical advantages in shoulder strength, eccentric control, range of motion, scapular stability, and shoulder pain. Overall, our patient with rotator cuff syndrome showed improvement in dressing and undressing activity in response to the PNF strategy. CONCLUSION: Application of the PNF intervention strategy after complete rotator cuff tear would have a positive effect on patient upper extremity function.

• 한국콘텐츠학회논문지
• /
• 제16권11호
• /
• pp.614-622
• /
• 2016

오늘날 매체가 다양해짐에 따라, 애니메이션의 영역도 확장되고 있다. 이전에는 볼 수 없었던 여러 유형의 애니메이션이 등장하고, 모션그래픽 애니메이션, 인터렉티브 애니메이션 등과 같이 '애니메이션'이라는 접미사를 가지지 않았던 영역들도 애니메이션 이라는 단어를 사용하고 있다. 본 논문은 미국 애니메이션 교육에 대한 비교 분석 연구이다. 1961년 처음 대학에 애니메이션 교육이 도입된 이래 미국 애니메이션 교육을 이끌어오고 있는 아트 아카데미 대학교(Academy of Art University), 캘리포니아 예술 대학(California Art of Institute), 링글링 디자인 대학(Ringling College of Art and Design), 로드아일랜드 디자인 학교(Rhode Island School of Design), 시각 예술 학교(School of Visual Arts) 총 5개 대학을 대상으로 교육과정을 수집하고, 각각의 내용을 검토하였다. 애니메이션 교육과정을 전공 필수과목, 전공 선택과목, 교양과목으로 나누어 분석한 결과를 통해 한국의 애니메이션 교육과정의 개선점에 대하여 고찰해보고자 한다.

• 한국멀티미디어학회논문지
• /
• 제11권11호
• /
• pp.1491-1500
• /
• 2008

본 논문은 은닉 마르코프 모델을 사용하여 사람의 특정한 행동을 인식하여 사용자에게 알려주는 지능형 영상 감시 시스템을 제안한다. 본 방법에는 카메라를 통해 입력된 영상에서 사람 영역을 찾은 후 발 영역만을 추출하여 특징이 되는 관측열을 생성한다 특징 영역은 입력 영상의 각 프레임을 16개의 영역으로 나누어 발바닥이 위치한 곳의 코드를 읽어 사용하고, 인식하고자 하는 패턴 행동들에 대해서는 각각의 관측열을 구하고 HMM의 Baum-Welch 알고리즘을 사용하여 학습한다. 인식에는 전향 알고리즘을 사용하여 입력된 행동과 학습된 행동을 확률적으로 비교하여 영상 내의 행동이 어떤 패턴 행동인지를 결정하여 출력한다. 제시된 방법은 복도에서 사람의 특정 행동을 인식하는데 성공적으로 적용될 수 있음을 실험을 통해 확인했다.

• Journal of Korean Neurosurgical Society
• /
• 제42권2호
• /
• pp.103-111
• /
• 2007

Objective : We evaluated the accuracy of multislice computerized tomographic angiography (MCTA) in the postoperative evaluation of clipped aneurysms by comparising it with three dimensional digital subtraction angiography (3D-DSA). Methods : Between May 2004 and September 2006, we included patients with ruptured cerebral aneurysm of the anterior circulation that was surgically clipped and evaluated by both postoperative MCTA and postoperative 3D-DSA. We measured the diagnostic performance and calculated the sensitivity and specificity of postoperative MCTA compared to 3D-DSA in the detection of aneurysm remnants. Results : A total of 11 neck remnants among the 92 clipped aneurysms (11.9%) were confirmed by 3D-DSA. According to Sindou's classification of aneurysm remnants, 8.7% of clipped aneurysms (8/92) had only neck remnant on 3D-DSA and 3.2% (3/92 aneurysms) had residuum of the neck and sac on 3D-DSA. There were 12 (13.04%) equivocal cases that were difficult to interpret based on the postoperative MCTA. The reasons for the equivocal cases included multiple clips (6 cases, 50.0%). beam-hardening effect (4 cases, 33.3%), motion artifact (1 case, 8.3%), fenestrated clip (1 case, 8.3%) and other combined causes. The sensitivity and specificity of the postoperative MCTA was 81.8% and 88.9%, respectively by ROC curve (p=0.000). Conclusion : MCTA is an accurate noninvasive imaging method used for the assessment of clipped aneurysms in the anterior circulation. If the image quality of postoperative MCTA is good quality and the patient has been treated with a single titanium clip, except a fenestrated clip, the absence of an aneurysm remnant can be diagnosed by MCTA alone and the need for postoperative DSA can be reduced in a large percentage of cases.

• 한국지진공학회논문집
• /
• 제1권3호
• /
• pp.1-10
• /
• 1997

구조물 동적거동이 지반과 기초 특성에 따라 영향을 받는다는 것은 인식되었지만, 구조물 내진설계를 위한 설계규준이 지반의 본질적인 복잡성과 기초-지반체계에 대한 체계적인 연구부족으로 지반특성을 부분적으로만 반영하고 있어 불안전하거나 너무 안전한 결과를 초래한다. 이 연구에서는 전단파속도, 지반깊이, 기초 근입깊이 및 말뚝기초의 영향을 평가하여 구조물 내진해석을 위한 기초-지반체계의 운동학적 상호작용 영향을 고찰하였으며, 지반과 기초 특성을 고려한 합리적 내진해석을 위해 지반체계에 대한 수정된 분류기준을 제안하였다. 말뚝기초를 포함한 중형이나 대형 묻힌기초의 경우, 지초-지반체계의 운동학적 상호작용 영향을 고려하기 위해서는 기토밑 지반깊이를 최소한 60m 까지 고려해야하고, 말뚝유무에 관계없이 기초-지반체계의 회전운동도 구조물 내진해석에 포함되어야 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.563-574
• /
• 2008

Most of earthquake-induced geotechnical hazards have been caused by the site effects relating to the amplification of ground motion, which are strongly influenced by the local geologic conditions such as soil thickness or bedrock depth and soil stiffness. In this study, an integrated GIS-based information system for geotechnical data, called geotechnical information system (GTIS), was constructed to establish a regional counterplan against earthquake-induced hazards at an urban area, Daejeon, which is represented as a hub of research and development in Korea. To build the GTIS for the area of interesting, pre-existing geotechnical data collections were performed across the extended area including the study area and a walk-over site survey was additionally carried out to acquire surface geo-knowledge data. For practical application of the GTIS used to estimate the site effects at the area of interesting, seismic microzoning map of the characteristic site period was created and presented as regional synthetic strategy for earthquake-induced hazards prediction. In addition, seismic zonation for site classification according to the spatial distribution of the site period was also performed to determine the site amplification coefficients for seismic design and seismic performance evaluation at any site in the study area. Based on the case study on seismic zonations at Daejeon, it was verified that the GIS-based GTIS was very useful for the regional prediction of seismic hazards and also the decision support for seismic hazard mitigation.

• 대한전자공학회논문지
• /
• 제26권1호
• /
• pp.29-37
• /
• 1989

본 논문은 DP(dynamic programming) 매칭법을 확장하여 흘림체 한글을 온라인으로 인식하는 방법에 대하여 논한 것이다. 한글의 자소는 보다 간단한 자소에 선분이 점차로 추가되어 보다 복잡한 구조로 발전되는 특징이 있다. 자소의 조합에 의해 구성되는 한글에는 유사한 문자 패턴이 많다. 이러한 특성으로 인하여 한글에 대하여 DP매칭법을 적용하여도, 입력문자와 표준문자와의 패턴간 거리를 정확하게 구하는 것이 곤란하다. 본 방식에서는 DP매칭을 행하기 전에, 한글의 최초, 최후선분의 특성을 살린 대분류매칭을 행함으로써 DP매칭의 대상수를 줄였다. 본 방식은 DP매칭법에 자소패턴의 추출기능을 부가함으로써, DP매칭을 확장하여, 한글의 문자패턴간의 거리를 정확하게 측정하는 것을 시도한다. 자소패턴의 추출은, 자소패턴을 구성하는 선분의 ON/OFF, 방향코오드, 방향코오드의 변화, 배치 구조등을 조사함으로써 행한다. 이와같이 하므로써 필기운동 변화의 흡수와 비교적 안정된 스트로크의 분리가 가능함을 확인하였다.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.77-92
• /
• 2020

The present paper outlined a procedure for geometrically nonlinear dynamic analysis of functionally graded graphene platelets-reinforced (GPLR-FG) nanocomposite cylinder subjected to mechanical shock loading. The governing equation of motion for large deformation problems is derived using meshless local Petrov-Galerkin (MLPG) method based on total lagrangian approach. In the MLPG method, the radial point interpolation technique is employed to construct the shape functions. A micromechanical model based on the Halpin-Tsai model and rule of mixture is used for formulation the nonlinear functionally graded distribution of GPLs in polymer matrix of composites. Energy dissipation in analyses of the structure responding to dynamic loads is considered using the Rayleigh damping. The Newmark-Newton/Raphson method which is an incremental-iterative approach is implemented to solve the nonlinear dynamic equations. The results of the proposed method for homogenous material are compared with the finite element ones. A very good agreement is achieved between the MLPG and FEM with very fine meshing. In addition, the results have demonstrated that the MLPG method is more effective method compared with the FEM for very large deformation problems due to avoiding mesh distortion issues. Finally, the effect of GPLs distribution on strength, stiffness and dynamic characteristics of the cylinder are discussed in details. The obtained results show that the distribution of GPLs changed the mechanical properties, so a classification of different types and volume fraction exponent is established. Indeed by comparing the obtained results, the best compromise of nanocomposite cylinder is determined in terms of mechanical and dynamic properties for different load patterns. All these applications have shown that the present MLPG method is very effective for geometrically nonlinear analyses of GPLR-FG nanocomposite cylinder because of vanishing mesh distortion issue in large deformation problems. In addition, since in proposed method the distributed nodes are used for discretization the problem domain (rather than the meshing), modeling the functionally graded media yields to more accurate results.