• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.507-512
• /
• 1993

In this paper we discuss the nonlinear motion of a conservative two-link arm using first integrals, which includes one integral constant. In the analysis of the motion, the constant plays important role. First, we give some discussion on the free motion by focusing on the integral constant. As the result, the free motion can be classified into two types-the one is oscillation and the other is rotation. Second, we discuss the forced motion of the arm actuated only at the second joint. We take the first integral in a more general form, and show that the forced motion of the second link can be expressed as a variation of the integral constant. Also, the characteristic of the forced motion actuated by arbitrary constant torques is discussed.

• The Journal of Korea Robotics Society
• /
• v.6 no.1
• /
• pp.18-26
• /
• 2011

This paper presents a method, Exposure Controlled Temporal Filtering (ECF), applied to visual motion tracking, that can cancel the temporal aliasing of periodic vibrations of cameras and fluctuations in illumination through the control of exposure time. We first present a theoretical analysis of the exposure induced image time integration process and how it samples sensor impingent light that is periodically fluctuating. Based on this analysis we develop a simple method to cancel high frequency vibrations that are temporally aliased onto sampled image sequences and thus to subsequent motion tracking measurements. Simulations and experiments using the 'Center of Gravity' and Normalized Cross-Correlation motion tracking methods were performed on a microscopic motion tracking system to validate the analytical predictions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.267-272
• /
• 2004

In this Paper, we present analysis on the dynamics of human swing and its realization by a miniaturized humanoid robot. Since the motion of legs is the most important in the swing, the swing system can be approximated as a double pendulum. Based on Lagrangian analysis, the leg motion is designed to make the swing motion as sustained oscillation. In order to detect the peak instant of the swing and to synchronize the leg motion with the swing, we use ADXL acceleration/inclination sensor. The miniaturized humanoid in this paper has total 20 DOFs including 6 DOFs in each leg, 34cm in height, and 2kg in weight. As a result of realization of the swing by the humanoid, the sustained oscillation is verified through experiments.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.681-690
• /
• 2007

This article presents the kinematic analysis and implementation of an interface and control of two robots-an exoskeleton master robot and a human-like slave robot with two arms. Two robots are designed and built to be used for motion-following tasks. The operator wears the exoskeleton master robot to generate motions, and the slave robot is required to follow after the motion of the master robot. To synchronize the motions of two robots, kinematic analysis is performed to correct the kinematic mismatch between two robots. Hardware implementation of interface and control is done to test motion-following tasks. Experiments are performed to confirm the feasibility of the motion-following tasks by two robots.

• Journal of KSNVE
• /
• v.7 no.5
• /
• pp.765-772
• /
• 1997

This paper presents the swing motion analysis of the container crane headblock with the passive control device using hydraulic motors and anti-swing ropes. The device hauls at the headblock to opposite direction of its swing motion using the tension difference between anti-swing ropes connected to the headblock. To consider this control mechanism, the headblock is modelled as the rigid bar suspended by two hoist ropes at the overhead trolley and its non-linear equation of motion is derived using Lagrange's equation. Some numerical experiments using the equation are carried out to investigate the swing motion characteristics of the headblock under the variation of geometric relation among the cargo handling components and to evaluate the performance of the anti-swing device.

• Journal of Ship and Ocean Technology
• /
• v.3 no.1
• /
• pp.1-11
• /
• 1999

Numerical simulation for the axisymmetric body with contractive and dilative periodic motion is carried out. The present analysis shows that a propulsive force can be obtained in highly viscous fluid by the contractive and dilative motion of axisymmetric body. An axisymmetric code is developed with unstructured grid system for the simulation of complicated motion and geometry. It is validated by comparing with the results of Stokes approximation with the problem of uniform flow past a sphere in low Reynolds number($R_n$ = 1). The validated code is applied to the simulation of contractive and dilative periodic motion of body whose results are quantitatively compared with the two dimensional case. The simulation is extended to the analysis of waving surface with projecting part for finding out the difference of hydrodynamics performance according to variation of waving surface configuration. The present study will be the basic research for the development of the propulsor of an axisymmetric micro-hydro-machine.

• Journal of The Korean Association For Science Education
• /
• v.7 no.2
• /
• pp.61-70
• /
• 1987

This paper was made for the purpose of examining middle school student's conception about force and motion. Using questionaire method. this research was executed to 180 students at a middle school in Seoul. Questions were as following; 3 questions about relation of the direction of force and that of motion in case of throwing a ball up, 2 questions about parabolic motion. 1 question about inertia. and 1 question about action and reaction. The way of answering was both selecting and explaining the students' thought about questions. Network analysis was used for analyzing students' various responses. Through the analysis. some types of students' thought were revealed. As a result the representation of their response was motion implies force which had been discovered by earlier researchers. Even though students had learned about force and motion in the classroom. their ideas were unchanged or even reinforced wrongly in some case.

• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.155-161
• /
• 2008

Muscle force prediction in forward dynamic analysis of human motion depends many muscle parameters associated with muscle actuation. This research studies the effects of various parameters of Hill type muscle model using the simple hand raising motion. Motion analysis is carried out using motion capture system, and each muscle force is recorded for comparison with muscle model generated muscle force. Using Hill type muscle model, muscle force for generating the same hand rasing motion was setup adjusting 5 activation parameters. The test showed the importance of activation parameters on the accurate generation of muscle force.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.264-268
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse can. The curvilinear cam is rotated by positioning a translating roller and the automatic feeding mechanism is moved to the sliding position by the motion of a campin fixed on the curvilinear cam. The curvilinear cam consists of two arcs of circles and two straight lines. The modular approach is used for the kinematic analysis of the feeding mechanism. As the first part of the paper for the motion simulation of the cam-feeding system, this paper discusses the algorithm to simulate the motion of the cam-feeding mechanism. The second part of the paper presents the state-of-art for the graphics-oriented CAD technique,

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.772-777
• /
• 2000

Cam mechanisms are used commonly in many automatic machinery. Disk cam mechanisms has 4 different types according to the different types of followers. The motion characteristics of the cam mechanisms depend on the shape of the cam and the type of the follower. This paper performs the motion analysis for a disk cam and follower mechanism using a circular arc method and a coordinate transformation method in order to find a contact point of the cam and follower. The velocity is calculated by using the instant velocity concept. Also, the acceleration is determined on using the central difference method. As the results, this paper presents the original curve and the analyzed curve for the motion analysis of the disk cam for an example.