• 한국표면공학회지
• /
• 제42권2호
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.389-390
• /
• 2012

In this study, we fabricate a superhydrophobic surface made of hierarchical nanostructures that combine wax crystalline structure with moth-eye structure using vacuum cluster system and measure their hydrophobicity and durability. Since the lotus effect was found, much work has been done on studying self-cleaning surface for decades. The surface of lotus leaf consists of multi-level layers of micro scale papillose epidermal cells and epicuticular wax crystalloids [1]. This hierarchical structure has superhydrophobic property because the sufficiently rough surface allows air pockets to form easily below the liquid, the so-called Cassie state, so that the relatively small area of water/solid interface makes the energetic cost associated with corresponding water/air interfaces smaller than the energy gained [2]. Various nanostructures have been reported for fabricating the self-cleaning surface but in general, they have the problem of low durability. More than two nanostructures on a surface can be integrated together to increase hydrophobicity and durability of the surface as in the lotus leaf [3,5]. As one of the bio-inspired nanostructures, we introduce a hierarchical nanostructure fabricated with a high vacuum cluster system. A hierarchical nanostructure is a combination of moth-eye structure with an average pitch of 300 nm and height of 700 nm, and the wax crystalline structure with an average width and height of 200 nm. The moth-eye structure is fabricated with deep reactive ion etching (DRIE) process. $SiO_2$ layer is initially deposited on a glass substrate using PECVD in the cluster system. Then, Au seed layer is deposited for a few second using DC sputtering process to provide stochastic mask for etching the underlying $SiO_2$ layer with ICP-RIE so that moth-eye structure can be fabricated. Additionally, n-hexatriacontane paraffin wax ($C_{36}H_{74}$) is deposited on the moth-eye structure in a thermal evaporator and self-recrystallized at $40^{\circ}C$ for 4h [4]. All of steps are conducted utilizing vacuum cluster system to minimize the contamination. The water contact angles are measured by tensiometer. The morphology of the surface is characterized using SEM and AFM and the reflectance is measured by spectrophotometer.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.55-60
• /
• 2020

태양광 발전소에 설치된PERC 태양광 모듈 스트링-어레이는 고전압의 전위차로 인해 여전히 potential-induced degradation(PID) 열화 현상이 여전히 보고되고 있다. 이는 태양전지 모듈 커버글라스의 Na+ 이온이 태양전지 봉지재(EVA)를 투과하여 셀 표면으로 전이되고 결함이 많이 분포되어 있는 ARC(SiOx/SiNx) 계면에 양전하가 축적됨으로써 shunt-Resistance(Rsh)가 감소되고 누설전류량이 증가되어 태양전지 출력이 저하되는 현상이다. 본 연구에서는 이를 방지하기 위해 나노임프린트 리소그래피(nano-imprint lithography, NIL) 방식을 이용하여 모스아이(Moth-eye) 나노 구조를 광학 필름 후면에 증착 하였고, 이를 커버글라스와 EVA 사이에 삽입하여 태양광 미니 모듈을 구성하였다. PID 열화 현상을 확인하기 위해 IEC 62804-1 규격에 기반한 셀 단위 PID 열화가속시험을 진행하였고, Light I-V, Dark I-V 분석을 통해 출력(Pmax), 효율(Efficiency), 병렬 저항(shunt resistance)을 확인하였다. 그 결과 기존의 태양전지는 초기 효율 19.76%에서 6.3% 감소하였으나 모스아이 나노 구조 광학 필름(Moth-eye film)이 적용된 태양전지는 0.6% 만 감소하여 PID 열화 현상이 방지되는 것을 확인하였고, 모스아이 나노구조를 통해 투과도가 4% 향상되어 미니 모듈 출력이 2.5% 향상되었다.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.50-55
• /
• 2015

$Al_2O_3$ thin films were deposited on the moth eye anti-reflective nanostructured polycarbonate films by atomic layer deposition (ALD) techniques. Without ALD-$Al_2O_3$ thin films, moth eye anti-reflective nanostructured films had a high optical transmittance of 95.47% at a wavelength of 550 nm and a very poor hardness of 0.1381 GPa. With increasing the thickness of $Al_2O_3$ thin films from 5 to 25 nm, the transmittance of moth eye anti-reflective nanostructured films was gradually decreased from 94.94 to 93.12%. On the other hand, the hardness of the films was greatly increased from 0.3498 to 0.7806 GPa with increasing the thickness of $Al_2O_3$ thin films. This result shows that ALD thin films can be applied to improve mechanical properties with an adequate optical transmittance of the conventional moth eye anti-reflection nanostructure films.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.153-154
• /
• 2010

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.89-89
• /
• 2018

스마트 폰이나 내비게이션, 태블릿 PC, TV 등 디스플레이 소자가 휴대 가능해지고 고급화되면서 빛 반사로 인한 눈부심, 시인성 저하 등에 대한 문제가 제기되고 있다. 디스플레이의 반사방지를 위해 방현성(anti-glare) 및 반사방지(anti-reflection) 특성의 코팅이나 기능성 필름에 대한 연구 개발이 이루어지고 있다. 특히 반사방지 기능 부여를 위해 나방눈(moth-eye) 구조를 모방하여 표면 나노 구조 형상화에 대한 연구가 활발히 진행되고 있지만, 나노 임프린팅 및 리소그라피 공정을 통한 패턴 공정은 마스크나 몰드를 필요하고 대면적 제작에 어려움이 있다. 본 연구에서는 폭 300 mm급 롤투롤 이온빔 표면처리를 통해 나노 구조 몰드 필름을 제작하였고, 이형용 수지를 이용한 표면 구조 전사를 통해 모스 아이 구조와 같은 나노 구조 패턴이 전사되는 것을 확인하였다. 나노 구조가 전사된 필름에 대한 투과도 관찰 결과, 전체 투과도 91% 이상으로 투과도가 약 3% 향상되고 반사도는 저하되는 결과를 확인하였다. 롤투롤 장비를 이용하여 대면적 필름 제작이 가능한 것을 확인하였고, 나노패턴의 구조 형성 및 반사방지 기능에 대한 신뢰성 검토를 통해서 양산화 가능할 것이라 전망된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.393-393
• /
• 2012

Optically active nanostructures such as subwavelength moth-eye antireflective structures or surface enhanced Raman spectroscopy (SERS) active structures have been demonstrated to provide the effective suppression of unwanted reflections as in subwavelength structure (SWS) or effective enhancement of selective signals as in SERS. While various nanopatterning techniques such as photolithography, electron-beam lithography, wafer level nanoimprinting lithography, and interference lithography can be employed to fabricate these nanostructures, roll-to-roll (R2R) nanoimprinting is gaining interests due to its low cost, continuous, and scalable process. R2R nanoimprinting requires a master to produce a stamp that can be wrapped around a quartz roller for repeated nanoimprinting process. Among many possibilities, two different types of mask can be employed to fabricate optically active nanostructures. One is self-assembled Au nanoparticles on Si substrate by depositing Au film with sputtering followed by annealing process. The other is monolayer silica particles dissolved in ethanol spread on the wafer by spin-coating method. The process is optimized by considering the density of Au and silica nano particles, depth and shape of the patterns. The depth of the pattern can be controlled with dry etch process using reactive ion etching (RIE) with the mixture of SF6 and CHF3. The resultant nanostructures are characterized for their reflectance using UV-Vis-NIR spectrophotometer (Agilent technology, Cary 5000) and for surface morphology using scanning electron microscope (SEM, JEOL JSM-7100F). Once optimized, these optically active nanostructures can be used to replicate with roll-to-roll process or soft lithography for various applications including displays, solar cells, and biosensors.