• Computers and Concrete
• /
• 제31권6호
• /
• pp.485-499
• /
• 2023

Both damage and unsaturated conditions accelerate the transport of erosive media inside concrete. However, their combined effects have not been fully investigated. A multiscale mortar model using representative volume elements is developed, capturing the number and distribution in each phase. Afterwards, mortar damage microstructure evolution is simulated in the tensile process. Finally, the unsaturated mortar transport is predicted and analysed. The results indicate that damage significantly affects the diffusion process in the early stage, while the transport performance is weakened due to the obstruction of the nontransport phase in the later stage. The higher the saturation and the more connected pores, the faster the diffusion rate of chloride ions. Chloride ions spread around the cracks in a tree-like manner along. The model can very well predict the chloride ion transport performance of unsaturated and damaged mortar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.171-172
• /
• 2023

In order to reduce crack defects caused by the behavior of concrete during floor tile construction, this paper introduced a hybrid floor adhesion system that first constructs an organic adhesive with crack correspondence and attaches tiles with inorganic mortar.

• Computers and Concrete
• /
• 제19권4호
• /
• pp.429-434
• /
• 2017

Failure of basic structures material is usually accompanied by expansion of interior cracks due to stress concentration at the cracks tip. This phenomenon shows the importance of examination of the failure behavior of concrete structures. To this end, 4 types of mortar samples with different amounts of nano-silica (0%, 0.5%, 1%, and 1.5%) were made to prepare twelve $50{\times}50{\times}50mm$ cubic samples. The goal of this study was to describe the failure and micro-crack growth behavior of the cement mortars in presence of nano-silica particles and control mortars during different curing days. Failure of mortar samples under compressive strength were sensed with acoustic emission technique (AET) at different curing days. It was concluded that the addition of nano-silica particles could modify failure and micro-crack growth behavior of mortar samples. Also, monitoring of acoustic emission parameters exposed differences in failure behavior due to the addition of the nanoparticles. Mortar samples of nano-silica particles revealed stronger shear mode characteristics than those without nanoparticles, which revealed high acoustic activity due to heterogeneous matrix. It is worth mentioning that the highest compressive strength for 3 and 7 test ages obtained from samples with the addition of 1.5% nano-silica particles. On the other hand maximum compressive strength of 28 curing days obtained from samples with 1% combination of nano-silica particles.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권1호
• /
• pp.59-66
• /
• 2020

본 연구에서는 보수 모르타르와 직접 혼합 가능한 결정성장형 자기치유 고상캡슐을 제조하였으며, 자기치유 고상캡슐이 혼합된 보수 모르타르의 품질 및 균열 치유 성능 특성을 평가하였다. 자기치유 고상캡슐을 혼합한 보수 모르타르의 테이블 플로우 및 공기량 평가 결과 혼합율에 관계없이 테이블 플로우 및 공기량은 큰 영향이 없는 것으로 나타났다. 압축강도는 캡슐 혼합율이 증가할수록 강도가 감소하는 경향이 나타났다. 정수위 투수시험에 따른 균열 치유 특성 평가 결과 초기 투수량이 감소하는 결과가 나타났으며, 시간 경과에 따라 반응 생성물 발생하여 균열이 치유되는 것을 확인 할 수 있었다.

• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.359-365
• /
• 2015

본 연구에서는 바닥 모르타르에 발생하는 균열을 방지하기 위해, 팽창성이 있는 재료인 알파반수석고를 활용한 비소성결합재 기반 바닥 모르타르의 경화특성 및 건조수축 특성을 평가하고, 건설현장에 적용하여 외기환경에 노출된 조건에서 바닥 모르타르의 수축변형 거동 및 균열 발생여부를 검토하였다. 그 결과, 슬래그계 바닥 모르타르의 경우 시멘트계 모르타르에 비해 초결 및 종결시간이 급격히 단축되었고 압축강도는 관련기준을 만족하는 것으로 확인되었으며, 초기에 팽창 변형 이후의 수축변형 거동은 시멘트계 모르타르와 유사한 경향을 나타내었다. 슬래그계 바닥 모르타르의 현장 적용 결과 균열이 발생하지 않았으며, 외기환경 조건에 의한 변형률의 차이가 크지 않아 시멘트계 바닥 모르타르에 비해 치수안정성이 큰 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.853-858
• /
• 2000

According to the results of this research, Production of Fold Mortar Permanent - Form was found to be possible by Mortar. Th FP-Form (Fold Permanent-Form) mortar had compress strength 580kgf/$\textrm{cm}^2$. FP-Form model was made by the result of the first research. There was no minute-crack on beam form and the outer surface of form was very smooth, and those qualities it were made possible hand-mad by experiment. This study is about bond strength progress of FP-Form that developed for the form work rationalization and systematization. The result of this study follows; (1) Fluidity and strength development of mortar which used for FP-Form are satisfied (2) After study on getting good bond strength progress, inside-uneven type presents the better suitableness, and wire netting V-type presents the better shear strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.157-158
• /
• 2022

A problem arose about the lack of strength of dry mortar for flooring. To solve the problem of lack of strength, a high-strength dry mortar was applied. However, problems arose about the increase in the amount of cracks. It is necessary to analyze the causes of the increase in the amount of cracking in high-strength dry mortar and take countermeasures.

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.39-46
• /
• 2000

This study is to investigate the watertightness properties of waterproofing admixture mixed redispersible polymer and siliceous powder. Series I deals with change in micro-structure of mortar by waterproofing admixture according to the water/cement ratios of 0.5, 0.6, 0.7 and 0.8 Crystal growth in micro-structure was observed through SEM to estimate on the watertightness effect of it. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. SeriesII deals with watertightness properties of waterproofing admixture on water permeability coefficient, crack restoration capacity and carbonation depth. The result of this study can be summarized as follows. 1) Fluidity of mortar and concrete was increased by adding waterproofing admixture. 2) From observation through SEM. Crystals grew larger and denser in micro-structure as fiberic crystalization. 3) Waterproofing admixture is good watertightness properties in a level of high water/cement ratios and long limit of time. 4) Crack restoration capacity was appeared and durability was progressed by waterproofing admixture.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.185-195
• /
• 2000

Detection of cracks in concrete beams using optical fiber sensors is useful for monitoring of concrete structures. In this study, optical time domain reflectometry (OTDR) is used to detect cracks. Resolution of OTDR is the main contributor to detect cracks in concrete structures. The OTDR used in this study can detect cracks with high precision of 0.5 m. Two mortar beams, reinforced with a 19 mm diameter steel bar, are made with the dimensions of 140 mm (width) ${\times}$ 200 mm (depth) ${\times}$ 2.000 mm (length). Two fibers are embedded inside each beam and two fibers are attached under the beams. The application of measurement system which consists of fiber and FC/PC connecter is studied. For this, theory of optics, resolution, crack moment, and size of specimens are investigated. From the measured data, it is verified that fibers which are attached under the beam can detect the crack in beams effectively. However, fibers embedded inside the beam are unable to detect cracks in beams using the OTDR in this study.

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.267-273
• /
• 2017

최근 콘크리트 구조물의 유지보수 문제가 대두되면서 구조물에 발생하는 균열을 스스로 치유하는 자기치유 기술이 활발히 연구되고 있다. 현재 자기치유 콘크리트의 치유 성능 평가에 투수시험이 널리 사용되지만, 이와 관련된 표준화된 방법이 없어 시험결과의 비교에 어려움이 있다. 또한 콘크리트의 자기치유 성능은 초기 균열폭에 큰 영향을 받는데, 콘크리트의 균열폭 측정을 위한 표준화된 방법도 없는 실정이다. 따라서 본 연구에서는 정수위 투수시험 장치를 이용하여 수두차와 균열폭이 유출수량에 미치는 영향을 분석하였다. 또한 투수 실험 결과의 회귀 분석을 통해 유출수량과 초기 균열폭의 상관관계식을 제안하였으며, 제안된 식을 이용하여 예측한 모르타르 시편의 균열폭이 광학현미경을 이용하여 측정한 실제 균열폭과 잘 일치하는 결과를 얻었다.