• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.476-480
• /
• 2006

For the purpose of application to new natural dyestuff, the dyeability of Rubus coreanus Miquel extract was analyzed. It was dyed in silk fabric according to various dye concentration, dyeing temperature, dyeing time, and dyeing repetition. And the effects of mordanting conditions were examined as color differences and color fastnesses. The maximum absorbance of Rubus coreanus Miquel extract was at 521 nm. The dyeaffinities were increased gradually as were increased dye concentration, dyeing temperature, dyeing time, and dyeing repetition. The dyeaffinity was increased at pre-mordanted condition, and color difference was increased distinctly at post mordanted condition. The hues of mordanted silk fabrics were RP, P, PB, BG where as non mordanted silk fabric was R. Lightfastness was the best at pre-Sn mordanted and the worst at Post-Al mordanted. Washing and perspiration fastnesses were improved on pre and post-Sn mordanted.

• 한국염색가공학회지
• /
• 제12권4호
• /
• pp.239-247
• /
• 2000

The coloring matter was extracted from the heartwood of Amur cork tree by distilled water. Change of UV-Visible spectra of coloring matter solution by extraction condition and stability for irradiation were determined, and the effect of repeated dyeing with condition of dyebath and mordanting method on shade depth and lightfastness were also investigated. The results are as follows : 1) Absorbance of Amur cork tree extract increased with the lapse of extraction time. λmax of color solution extracted from Amur cork tree was found at 420, 333, and 262nm. 2) Absorbance of Amur cork tree extract decreased remarkably after 2hr irradiation. 3) The K/S of silk fabrics increased with the increase of dyeing temperature, time, amounts of Amur cork tree for extraction, and pH of color solution. 4) K/S of silk fabrics dyed by repeated dyeing method was affected by pH and concentration of color solution. 5) Lightfastness of silk twice dyed with Amur cork tree extract after pre-mordanted by 8%(o.w.f) chromium acetate was moderately improved.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Current Research on Agriculture and Life Sciences
• /
• 제30권2호
• /
• pp.76-81
• /
• 2012

본 연구에서는 검정팥 종피에 함유된 천연색소에 대한 연구의 일환으로, 천연염료로서의 적용을 위해 염색조건 즉 염색온도, 염색시간, 염색 pH, 욕비에 따른 K/S 값을 측정하여 적정 염색조건을 설정하고, 여러 매염제를 적용하여 색상변화에 미치는 영향 및 견뢰도를 측정하여 다음과 같은 결과를 얻었다. 1. pH에 따른 염색성에서는 견직물의 경우 pH 4에서 가장 염착량이 많았고, 면직물의 경우에는 주어진 범위 내에서 는 pH가 높을수록 염착량이 많았다. 2. 염색온도와 시간에 따른 염색성은, 견직물의 경우, 염색온도 $40^{\circ}C$와 $60^{\circ}C$에서는 전반적으로 염착량이 낮고 시간에 따른 염착량의 차이도 크지 않았으나 염색온도 $80^{\circ}C$에서는 시간이 경과할수록 K/S 값이 크게 나타났다. 면직물의 경우도 견직물과 비슷한 결과로 온도가 높아질수록 염색시간이 경과될수록 K/S 값이 크게 나타났다. 3. 견직물에 대한 매염제 종류별 표면색의 변화에서는 Fe 매염포만 YR${\rightarrow}$Y 로 변화되었을 뿐 다른 매염제에서는 매염후에도 색상 변화는 크지 않았다. Sn 매염과 Ti 매염포는 무 매염포 보다 $L^*$값이 상승하였으나 나머지 매염제는 $L^*$값이 크게 감소되었다. 면직물에 대한 표면색의 변화는 견직물에서와 같은 경향으로 나타났으며, $L^*$값에 있어서는 견직물과 다르게 Ni 매염포만 무매염포보다 $L^*$ 값이 크게 나타났다. 4. 매염처리 전 견직물의 일광 견뢰도는 무매염이 4~6등급, Al 처리포는 4~5등급, Cu와 Sn은 3~4등급으로 나타났고 Fe는 2~3등급으로 가장 낮게 나타났으며, 세탁견뢰도에서는 무매염 2등급, 매염제 처리포는 전부 2내지 3등급으로 나타났다. 무매염 면직물의 일광견뢰도는 1~2등급, Fe 매염은 2~3등급, Cu 2등급 Al과 Sn은 1~2등급으로 매염처리에 의해 전혀 개선되지 않았으며, 세탁견뢰도의 경우 Cu매염이 4등급으로 양호하게 나타났으며 무매염, Al, Sn과 Fe는 3등급으로 나타났다.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.145-153
• /
• 2009

By introducing chitosan treatment prior to dyeing, examination was given to the effect of chitosan coated on the surface of fabrics on the color change of dyed fabric based on th e change of ${\Delta}E$, a*, and b* values. At the same time, the dyeing mechanism of Caesalpinia sappan dyestuff was predicted by the investigation of the change of air-permeability ac cording to the chitosan treatment. The change of elution was investigated by the examination of the elution of metallic ions employed as mordants after soaking dyed fabrics in the solution of alkaline perspiration ba sed upon the fact that chitosan carries excellent absorption ability toward metallic ions.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.136-144
• /
• 2009

The purpose of this study is to investigate various phenomena quantitatively occurring during the course of changing dyeing conditions of cotton and silk fibers in natural dyeing using Caesalpinia sappan. Paying attention to the fact that the color may be varied according to the extraction conditions of dyestuffs in Caesalpinia sappan dyeing, the color changes were investigated after dyeing using dyestuffs extracted at elevated temperature and dyestuffs extracted at room temperature. According to the extraction methods, the degree of color development for the category of red color and the category of yellow color has changed.

• 한국의류산업학회지
• /
• 제2권3호
• /
• pp.215-219
• /
• 2000

Dyeability and antimicrobial activity of Saururus chinensis on to silk and cotton fabrics has been studied. The dyestuff was extracted with distilled water. Silk fabric showed higher K/S value than cotton fabric at the same condition. And with the simmordanting by Fe, Cu gave good improvements of the K/S values. Surface color of dyed fabrics was various according to the used mordants: Cr mordanted fabric was to be cleared, Fe mordanted fabric was the greatest color difference. The fastness was significantly improved in mordanting. The Fe, Cu mordanted silk fabrics was the greatest antimicrobial activity.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.166-173
• /
• 2009

The natural dyeing of silk fabrics with Rumex crispus L. root extract was investigated. The dyeability of Rumex crispus L. root extract was evaluated with condition of concentration, temperature, time, repeat-numbers, pH, mordants variables, methods of mordanting, color fastness and antibacterial activity, etc. The wavelength of maximum absorption of the Rumex crispus L. distilled water extract appears at 274 nm and 336 nm, methanol extract was 274 nm and 356 nm. Optical dyeing temperature of silk fabrics was $70^{\circ}C$. The K/S values of the dyed fabrics were increased with increasing dyeing time. Surface colors of dyed fabrics were various by the used mordants; RP-YR-Y range. The color fastness was improved by adding mordants were added except Sn. Dyed silk fabrics with mordants showed antibacterial activity.

• 대한가정학회지
• /
• 제41권7호
• /
• pp.13-24
• /
• 2003

Recently there has been interested in the use of natural dyes in textile applications. Generally natural dyes can exhibit better biodegradability and have a higher compatibility with the environment. In this study, cotton, wool and silk fabrics were dyed with alkali extract of Arecae semen using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning and UV-B protection rate were also investigated. Cotton, silk and wool fabrics dyed with alkali extract of Arecae semen were colored in reddish yellow tint. The optimum dyeing condition of the colorants extracted from the Alecae semen was three repeated dyeing at $95^{\circ}C$ for 1.5 hrs. The dyed fabrics by using mordanting methods improved the fastness to washing, perspiration and drycleaning, but the fastness to light and rubbing were not increased. The UV-B protection rate of the wool fabrics were increased by dyeing with extract of Arecae semen.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1493-1499
• /
• 2001

This paper investigated the dyeabiltiy and surface color of Han Jee dyed with Gardenia extract after mordanted with mordants under the various dyeing conditions. The results obtained were as follows 1) λmax of the dyeing Han Jee dyed with Gardenia appeared at 660 and 710nm. 2)K/s value of dyeing Han Jee was increased when dyeing condition, temperature, time was higher. 3) Surface color of Han Jee with mordants changed differently according to the mordants used : 3.2Y by Aluminum acetate, 2.0GY by Copper sulfate, 9.5YR by Iron sulfate. 3.4Y by Tin chloride, and 4.5Y by non-mordanting.