• 한국재료학회지
• /
• 제13권4호
• /
• pp.219-223
• /
• 2003

Zirconia gels dispersed with fine Au particles have been prepared by the sol-gel method. Starting solution with (OC$Zr_4$$H_{ 9}$)$_4$, $C_4$ $H_{9}$ OH, $H_2$O,$ HNO_3$, $HAuC1_4$ was used to prepare gels in several molar ratio. After hydrolysis, viscosity of solutions as 4∼5 cP and gelling time of sols were spent about 9 days. As the heat-treatment temperature was increased,$ ZrO_2$ had the phase transition from tetragonal to monoclinic at $750^{\circ}C$. Heat-treatments of the gel have performed at 500, 700, 750, 800, 1000 and $1100^{\circ}C$ for 3 hrs, respectively. We have investigated TG-DTA, X-ray diffraction patterns, SEM and EDS. The size of Au fine particles dispersed in the heat-treatmented gel was about 0.15∼0.23 $\mu\textrm{m}$ and the shape was most sphericity.

• 대한화학회지
• /
• 제30권6호
• /
• pp.500-509
• /
• 1986

새로운 전지의 개발을 위하여$ AgI-Ag_8S_3SO_4$system들을 만들어 이에 대한 전기전도도 측정, 상 연구 및 그 구조를 조사하였다. X-ray powder diffraction method로 20mole% $ Ag_8S_3SO_4$-AgI system의 구조가 단사정계임을 규명하였고 DTA method로 단일상을 이룸을 확인하였다. 4-probe method를 적용시켜 전기전도도를 측정한 결과 20mole% $ Ag_8S_3SO_4$-AgI system이 순수한 $ Ag^+ $이온성 couduct임을 밝힐 수가 있었다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.434-438
• /
• 2013

Monodispersed 3Y-$ZrO_2$ spherical agglomerates were synthesized by thermal hydrolysis process followed by crystallization processes (hydrothermal treatment and calcination). The crystallization process affected the properties of the final particles, such as the primary particle size, the agglomeration state, and the fraction of $ZrO_2$ monoclinic phase. The hydrothermal treated spherical particles were porous microstructures (weak agglomerates) composed of small primary particles with a size of 14 nm, but the calcined spherical particles had a dense microstructure due to the hard aggregation between primary particles. While the calcined particles had a low green density due to the hard aggregation, hydrothermal treated ones were soft agglomerates and had a deflection point at 50 MPa due to the rearrangement of secondary spherical particles and the filling of the interstices with the primary particles. Finally, the green density of hydrothermally treated $ZrO_2$ particles was 58% at 200 MPa.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.108-113
• /
• 2015

In an effort to evaluate the practicability of an imprinting technique for amorphous chalcogenide film in Ge-based compositions, we investigate the deformation behavior of the surface of amorphous $GeSe_2$ film deposited via a thermal evaporation route according to varying static loads applied at elevated temperatures. We observe that, under these static loading conditions, crystallization tends to occur on its surface relatively more easily than in As-based $As_2Se_3$ films. As for the present $GeSe_2$ film, higher processing temperatures are required in order to make its surface reflect the given stamp patterns well; however, in this case, its surface becomes partially crystallized in the monoclinic $GeSe_2$ phase. The increased vulnerability of this amorphous $GeSe_2$ film toward surface crystallization under static loading, when compared with the $As_2Se_3$ counterpart, is explained in terms of the topological aspects of its amorphous structure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.195-195
• /
• 2010

$Ga_2O_3$ thin films have been grown on Si(001) substrates by metalorganic chemical vapor deposition (MOCVD) using dimethylgallium isopropoxide ($Me_2GaO^iPr$, DMGIP) with oxygen as the reactant gas. Suitability of the precursor for CVD was confirmed by thermogravimetric analysis (TGA) and vapor pressure measurement. Deposition was carried out in the substrate temperature range $450-650^{\circ}C$. Spectroscopic ellipsometry, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) and Rutherford back-scattering spectroscopy (RBS) were used to determine the thickness, crystallinity, and composition and stoichiometry of the films, respectively. From the slope of the Arrhenius plot in the temperature range $500-550^{\circ}C$, the activation energy of deposition was found to be $225.5\;kJ\;mol^{-1}$. As-deposited films were amorphous, but the monoclinic $\beta-Ga_2O_3$ phase was revealed after annealing the films in air at $1050^{\circ}C$. The XPS and RBS analyses indicate that the $Ga_2O_3$ films obtained by using DMGIP were found to be almost stoichiometric.

• 한국재료학회지
• /
• 제26권2호
• /
• pp.95-99
• /
• 2016

In this study, 5 um sized $ZrSiO_4$ was ground to 1.9 um, 0.3 um, and 0.1 um sized powders by wet high energy milling process, and the sintering characteristics were observed. Pure $ZrSiO_4$ itself can-not be sintered to these levels of theoretical density, but it was possible to sinter $ZrSiO_4$ powder of nano-scale size of, -0.1 um to the theoretical density and to lower the sintering temperature for full density. Also, the decomposition of $ZrSiO_4$ with a size in the micron range resulted in the formation of monoclinic $ZrO_2$; however, in the nano sized range, the decomposition resulted in the tetragonal phase of $ZrO_2$. So, it was possible to improve the sintering characteristics of nano-sized $ZrSiO_4$ powders.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.219-226
• /
• 2023

Utilizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate relevant gas sensors by means of potential enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned cupric oxide (CuO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a CuO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Cu metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the CuO nanorods array of the single monoclinic tenorite crystalline phase. From gas sensing measurements for the nitrogen monoxide (NO) gas, the vertically aligned CuO nanorod array is observed to have a highly responsive sensitivity to NO gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO at 200 ℃ and a low NO detection limit of 2 ppm in dry air. These results along with a facile fabrication process demonstrate that the CuO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO gas sensors.

• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.18-27
• /
• 2024

A series of shock wave pulses with Mach number 2.2 of 100, 200, and 300 shocks were applied to lead sulfide (PbS) nanomaterials at intervals of 5 sec per shock pulse. To investigate the crystallographic, electronic, and magnetic phase stabilities, powder X-ray diffractometry (XRD), diffused reflectance spectroscopy (DRS), and vibrating-sample magnetometry (VSM) were employed. The material exhibited a rock salt structure (NaCl-type structure); XRD results indicated that material is monoclinic with space group C121 (5). Further, XRD results showed shifts due to lattice contraction and expansion when material was subjected to shock wave pulses, indicating stable material structure. Based on the data obtained, we believe that the PbS material is a good choice for high-pressure, high-temperature, and aerospace applications due to its superior shock resistance characteristics.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.821-829
• /
• 2006

A series of catalysts, $NiO/La_2O_3-ZrO_2/WO_3$, for acid catalysis was prepared by the precipitation and impregnation methods. For the $NiO/La_2O_3-ZrO_2/WO_3$ samples, no diffraction lines of nickel oxide were observed, indicating good dispersion of nickel oxide on the catalyst surface. The catalyst was amorphous to X-ray diffraction up to 300 ${^{\circ}C}$ of calcination temperature, but the tetragonal phase of $ZrO_2$ and monoclinic phase of $WO_3$ by the calcination temperatures from 400 ${^{\circ}C}$ to 700 ${^{\circ}C}$ were observed. The role of $La_2O_3$ in the catalyst was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The high acid strength and high acidity were responsible for the W=O bond nature of complex formed by the modification of $ZrO_2$ with $WO_3$. For 2-propanol dehydration the catalyst calcined at 400 ${^{\circ}C}$ exhibited the highest catalytic activity, while for cumene dealkylation the catalyst calcined at 600 ${^{\circ}C}$ showed the highest catalytic activity. 25-$NiO/5-La_2O_3-ZrO_2/15-WO_3$ exhibited maximum catalytic activities for two reactions due to the effects of $WO_3$ modifying and $La_2O_3$ doping.

• 공업화학
• /
• 제26권4호
• /
• pp.427-431
• /
• 2015

본 연구에서는 열-변색 소재로 잘 알려진 이산화바나듐($VO_2$) 분말을 $V_2O_5$ 분말과 옥살산 수화물로부터 여러 조건에서 수열합성과 하소공정을 통하여 제조하였다. 제조된 시료들의 화학적 구조, 결정구조 및 열적 특성들은 FE-SEM, XRD, XPS 및 DSC를 이용하여 분석하였다. 또한, 필름 시편들의 분광학적 및 열변색 특성은 제조된 분말 시료들을 볼밀링하여 50 nm 이하로 분산시켜 제조된 졸로부터 박막필름을 제작하여 UV-Vis-NIR 분광기를 이용하여 분석하였다. $VO_2$ 시료의 하소처리 온도를 증가시키면, 입자들의 크기가 증가함에 따라 시료의 상전이온도가 약 $40^{\circ}C$에서 $70^{\circ}C$로 증가하는 경향을 나타내었다.