• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.549-552
• /
• 2008

In this study, we deployed the cable tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway can be applied to cable tunnel monitoring system. Sensors considered herein are flame detection sensor, flood detection sensor, intruder detection sensor, and temperature sensor, etc. It is also found that the wireless sensor network can deliver sensing data reliably by wireless sensing technology. The gateway system that can transmit sensed data to server by CDMA is developed. Monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. The system provides an alternative to inspecting and monitoring the tunnel efficiently where the conventional wired system is infeasible.

• 한국전자통신학회논문지
• /
• 제9권11호
• /
• pp.1305-1310
• /
• 2014

본 논문에서는 현존하는 크레인 모니터링 시스템의 문제점을 보완한 새로운 크레인 통합 모니터링 시스템 구현한다. 구현하는 모니터링 시스템은 무선 네트워크를 기본으로 주 차단기의 전체 부하전류를 측정하기 위한 시스템, 주 감속기의 오일 및 베어링 감시를 위한 온도와 진동 측정 시스템, 주권 모터 베어링의 온도 측정 시스템, 또한 전기실 전체의 화재 감시를 위한 센서 등을 갖추고 여기에서 측정한 데이터를 중앙의 감시실로 전송하여 진단을 수행하는 통합 모니터링 시스템을 구현하고 성능시험을 수행한다.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.299-302
• /
• 2016

본 논문에서는 성능이 향상된 Stack Monitoring System을 설계한다. Stack Monitoring System의 증폭기(AMP)에 들어오는 펄스성 잡음을 차단하기 위하여, 차폐 및 전원부 임피던스를 낮추고 전원회로를 분리하여 노이즈를 차단한다. 신틸레이션 검출기 특성을 최대한 장치에 매칭하기 위한 가변 고전압, 이득(Gain), 상쇄(Offset), 한계(Threshold) 등을 설정 할 수 있는 제어부를 설계한다. 또한 300 ~ 1,500V의 가변 고전압 전원회로를 구성하여 다양한 신틸레이션 검출기에 적용가능 한 가변 전압 공급 장치를 설계한다. 성능이 향상된 Stack Monitoring System은 다종의 신틸레이션 검출기가 각각의 특성을 고려하여 동작하게 함으로서 효율적이고 높은 신뢰성을 보장한다. 개발된 Stack Monitoring System의 측정 불확도에 대하여 공인 시험기관의 장비를 사용하여 실험한 결과 우수한 성능을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.347_348
• /
• 2009

In this paper, we described the integrated monitoring system for low-voltage panel boards. This system consists of three parts, a panel board controller, an integrated monitoring unit and a remote PC. The panel board controller which was made of CT/PT unit, control unit and power supply is able to transmit variable parameter for monitoring and diagnosis of low voltage branch circuits. Also, the integrated monitoring unit was collected monitoring data from panel boards and displayed on the touch panel.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.311-315
• /
• 2000

In thls paper, a remote machine monitoring system for a vimal machine is proposed. The monltonng system is one of the core functmns of a vimd machne that provides a modeling and simulation environment for machining processes and management of the machine life cycle. The proposed system contains the modules for investigating tool wear using neural network and web-based real time process monitoring. An example implementation for tool wear and machining status monitoring is illustrated

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.145-154
• /
• 1994

In this paper, monitoring processor in a circuit switched network is considered. Monitoring processor monitors communication links, and offers a grade of service in each link to controller. Such an information is useful for an effective maintenance of system. Two links with nonsymmetric system Parameters are considered. each link is assumed independent M/M/1/1 type. The Markov process is introduced to compute busy and idle portions of monitoring processor and monitored rate of each link. Inter-idle times and inter-monitoring times of monitoring processor between two links are respectively computed. A recursive formula is introduced to make computational procedure rigorous.

• 한국멀티미디어학회논문지
• /
• 제23권9호
• /
• pp.1171-1180
• /
• 2020

The number of the PV systems installed in south korea has been gradually increasing. Interest of operation & management of PV System is rising up as PV System installation trends to increase. The vital function of operation & management is the monitoring system. Most monitoring systems are only available for equipment of suppliers and manufacturers. In this study, a monitoring system was implemented to support multi-domain equipment (inverter, junction box, water distribution board, environmental sensors) that are not limited to specific manufacturers. Monitoring system includes a visualization function, which makes it easy for users to check the power generation and the operation status of the equipment of PV System. In the future, this monitoring system will be utilized as an operation & maintenance foundation element in the PV system industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.470-475
• /
• 2011

The objective of this study is the developement health & disaster monitoring measurement using ubiquitous active communication digital datalogger system for monitoring measurement of railway construction sites. For the replacement of current passive data communication, ubiquitous active communication digital datalogger system is studied for the first time with in a country. Therefore data communication method and analyzing program of automatic measurement data is developed for the global positioning automatic digital datalogger system. The results of this study will be using both real time automatic monitoring measurement and health & disaster monitoring measurement of railway structures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.183-183
• /
• 2000

In this paper, web-based remote monitoring for cold-rolling system is developed and the analysis of spatial control system is performed. The remote monitoring system is able to grasp the status of cold-rolling system regardless of time and locations. We analyzed spatial control algorithm of the system with the collected data. The usefulness of spatial control system is shown by simulation studies.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.