• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.635-638
• /
• 2009

ENC Optimizer S/W was developed for light weight, ENC speed improvement, nested data, and optimization of the data module. ENC optimizer customize based on Korea Ocean's ENC data by Investigators of the National Marine.Based on the modification of K-Map ENC through enhancemen to fENC Web OCX module and ENC Optimizier, AIS service by WebWM Shad been developed. WebVMS make it possible to view the ship information anywherevia WebBrowser. Later, through the expansion of the surveillance ship WebVMS the past, information about access, satellite communications, tracking and monitoring are currently used invarious applications such as shipping informationis available.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.123-131
• /
• 2005

Since most of the conventional web servers have been designed to Provide the general purpose and user's convenience as the primary goal, there is an overhead to apply them to the embedded system for remote monitoring and controlling the operation status of the Internet appliance. To cope with this overhead, an embedded Linux web server Is suggested in this paper The basic concept is to provide miniaturization and extendability by simplifying the requirements of web server as the services to the requests of web document for the user's menu and the execution of CGI Program for monitoring and controling the Internet appliance, and satisfying only the indispensable requirements of HTTP which are necessary for the interface with the conventional web browsers. For the evaluation of its feasibility, each module has been implemented on Linux environment, and tested with the MS Explorer 6.0.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.470-476
• /
• 1997

The dynamic characteristics of industrial processes frequently cause an abnormal situation which is undesirable in terms of the productivity and the safety of workers. The goal of fault-tolerance is to continue performing certain activities even after the failure of some system cononents. A fault-tolerant intelligent monitoring and control system which is robust under disturbances is proposed in this paper. Specifically, the fault-tolerant monitoring scheme proposed consists of two process models and the inference module to preserve such a robustness. The results of turning experiments demonstrate the effectiveness of the fault-tolerant scheme in the presence of built-up edge.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.279-285
• /
• 2002

This Paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. in this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost, and we used RS-485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. As the result for experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.1 s.307
• /
• pp.7-12
• /
• 2006

In this paper we proposed a real-time remote monitoring system for interoperability between local area and wide area for wireless data communication. In local area, we used a miniaturized low-power wireless module and in wide area used CDMA Cellular System's Packet Data Service. The measurement results can be spread via Internet access in real-time

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.440-444
• /
• 2016

In this paper, an equivalent circuit model for near-field noise emission is proposed to implement a multimedia operation-monitoring system for mobile devices. The proposed model includes a magnetic field probe that captures noise emissions from multimedia components, and a transfer function for near-field noise coupling from a transmission line source to a magnetic field probe. The proposed model was empirically verified with transfer function measurements of near-field noise emissions from 10 kHz to 500 MHz. With the proposed model, a magnetic field probe was optimally designed for noise measurement on a camera module and an audio codec in a mobile device. It was demonstrated that the probe successfully captured the near-field noise emissions, depending on the operating conditions of the multimedia components, with enhanced sensitivity from a conventional reference probe.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.370-372
• /
• 2005

Inconveniences which might arise in transmitting measured biological data based on cable protocols generally are recognized critical points in tele-monitoring environment and also restrict the mobility of the user. a. Especially, activity monitoring which is importantly recognized as a core parameter in ubiquitous healthcare arena and weight management, pervasive and wireless measuring technology is most needed. In this paper, we would like to suggest lower power, miniaturized communication system in order to solve the above problems. The suggested system is powered by small coin-size battery. Also, The suggested system is compared with a blue-tooth module which is generally available in the commercial market. Even though, the suggested system didn't have higher transmission rate, its low power consumption make the suggested system would be feasible in ubiquitous monitoring of biological signals in ubiquitous healthcare arena.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.51-58
• /
• 2020

In this study, a novel method for sweeping automatic linearization of wavelength swept laser is proposed. Through the test performed on the implemented laser, the linear sweeping is held up well with a 97% decrease in nonlinearity, and 60 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The proposed method uses fiber Bragg grating array, optical-electronic conversion circuit, FPGA embedded module, and a LabVIEW program to generate new compensated wave patterns which were applied to the fiber Fabry-Perot tunable filter. Linear sweeping can reduce the cumbersome and time-consuming recalibration process required for nonlinear sweeping. Additionally, the proposed method provides more accurate measurement results for the structure safety monitoring system.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.43-45
• /
• 2007

We developed a portable urodynamics monitoring system using personal digital assistance (PDA) and proposed a new method for measuring the abdominal pressure in non invasive mode using surface EMG signals. This system is consisted of a signal conditioning and control module and could measure the vesical, abdominal and detrusor pressure. The result showed a high correlation coefficient between the practical abdominal pressure, using a conventional rectal catheter and the estimated values, by our proposed algorithm (r=0.81). This system should prove a useful tool in the future evaluations of ambulatory urodynamics monitoring study.