• Journal of Sensor Science and Technology
• /
• v.15 no.2
• /
• pp.77-83
• /
• 2006

A monitoring apparatus for pulse shapes of human heartbeats has been developed using an amorphous MI(Magnetic Impedance) sensor. The pulse shapes are successfully obtained from voltage signals due to the variations of magnetic impedance in the amorphous MI sensor, which is attached to a patient's wrist. This voltage signal was fed into a signal processing module to extract the pulse shapes of heartbeats. The signal processing module, which is proposed to detect a weak variations of impedance in MI sensor under a noisy measurement environment, consists of a high frequency current source, an amplifier stage and a synchronous detection circuit. To evaluate the characteristics of a newly developed apparatus, various experiments were performed. The experimental results show that the developed apparatus could be used as a diagnosis tool for traditional Korean medicine with further systematic clinical studies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.469-474
• /
• 2014

Installed on telephone poles laid scrambling to monitor the status of the communication lines, and cost information can provid eadditional information tools to develop systems to support on-site monitoring. Aerial support for a maintenance monitoring module to apply an embedded system, and information processing applications manufactured. In this study, a comprehensive plan in accordance with the government's aerial maintenance work to prevent accidents spread support for the device to immediately take advantage of big cities and aerial maintenance business, Construction worker accused of bias and aims to improve efficiency of maintenance puts.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.177-179
• /
• 2000

In this paper, we developed the online Monitoring & Diagnostic(MD) system of distribution transformers. It consists of the Data Acquisition(DA) module and the DataBase(DB) module. The acquired data from the distribution transformers is stored to the DB in an on-line. The DB is planned and made to the RDBMS (Relative DataBase Management System) to manage the data efficiently. The developed MD system estimates the loss of life from the DB. Thus, it could be managed the career and the functional lifetime of the transformer more efficiently than existing systems. In the case study, the oil temperature rising experiment is performed by using the back loading method in the laboratory level. From the results, the proposed MB system can be a practical applications for the distribution transformers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.498-503
• /
• 2010

Recently, the industrial electric customers require a digital switchgear which can improve the safety and reliability of the power supply, and the quality of electric power by on-line monitoring the electric power information based on the internet under the ubiquitous environments. Accordingly, in this paper, a industrial switch-gear prototype is designed based on the power supply method of three phase, four-line type, and then a three-phase electric management module of the digital switchgear is made for industrial electric customer system. Finally, the three-phase voltage and current measuring function of the prototype is verified from real power load test.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.42-47
• /
• 2001

Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. In this paper, we would like to introduce the signal processing for ECG analysis and the device made for wireless communication of ECG data. In the signal processing, the wavelet transform decomposes the ECG signal into high and low frequency components using wavelet function. Recomposing the high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the polynomial approximation partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with the database, we can detect and classify the heart disease. The ECG detection device consists of amplifier, filters, A/D converter and RF module. After amplification and filtering, the ECG signal is fed through the A/D converter to be digitalized. The digital ECG data is transmitted to the personal computer through the RF transceiver module and serial port.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.139-142
• /
• 2014

앉아서 생활하는 시간이 많은 현대인들에게 올바르게 앉는 자세는 매우 중요하다. 따라서 현대인들이 올바른 자세를 유지할 수 있도록 도와주는 자세 모니터링 시스템을 고안하게 되었다. 이 시스템의 주요 구성으로는 전원부와 계측부, 제어부, 통신부, 안드로이드기반 어플리케이션으로 나눌 수 있다. 전원부는 9V의 건전지 하나로 구성되어 있고, 2개의 레귤레이터를 통해 아날로그 회로(3.3V)와 MCU(5V)에 전원이 공급되어진다. 그리고 계측부는 6개의 압력센서를 이용하여 아날로그 값을 계측한다. 제어부와 통신부는 MCU 보드(MSP430 Launchpad)와 FB155BC Bluetooth Module로 구성되어 있고, 안드로이드기반 어플리케이션은 Bluetooth Module에서 받은 디지털 신호들을 스마트폰의 화면에 UI공정을 거쳐 디스플레이 한다. 본 연구는 잘못된 자세로 의자에 앉는 습관을 스마트폰의 화면을 통해 실시간으로 확인하고, 바른 자세로 앉을 수 있도록 하여 척추교정 및 척추질환 예방에 기여할 것으로 예상된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.211-220
• /
• 2014

In this paper a full FPGA-based and compact motor-control system is shown that makes it easy to control the motor and analyze the result data in real time with embedding not only a DC motor controller but also a TFT LCD interface in a single FPGA. Both a PID speed control module for a DC motor and a monitoring module for plotting real time graphs on to a TFT LCD are designed in a single FPGA, and the system validity is shown through simulation and experimental results. The FPGA used is xc3s400 and the entire system is designed by using the AD (Altium Designer). A PWM motor drive system is constructed by using MOSFETs for a DC motor 4-quadrant operations.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1011-1019
• /
• 2019

In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.635-638
• /
• 2009

ENC Optimizer S/W was developed for light weight, ENC speed improvement, nested data, and optimization of the data module. ENC optimizer customize based on Korea Ocean's ENC data by Investigators of the National Marine.Based on the modification of K-Map ENC through enhancemen to fENC Web OCX module and ENC Optimizier, AIS service by WebWM Shad been developed. WebVMS make it possible to view the ship information anywherevia WebBrowser. Later, through the expansion of the surveillance ship WebVMS the past, information about access, satellite communications, tracking and monitoring are currently used invarious applications such as shipping informationis available.