• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.846-856
• /
• 2016

Wireless sensor networks (WSNs) are widely applied in monitoring and control of environment parameters. It is sometimes necessary to disseminate data through wireless links after they are deployed in order to adjust configuration parameters of sensors or distribute management commands and queries to sensors. Several approaches have been proposed recently for data dissemination in WSNs. However, none of these approaches achieves both high efficiency and low complexity simultaneously. To address this problem, cluster-tree based network architecture, which divides a WSN into hierarchies and clusters is proposed. Upon this architecture, data is delivered from base station to all sensors in clusters hierarchy by hierarchy. In each cluster, father broadcasts data to all his children with instantly decodable network coding (IDNC), and a novel scheme targeting to maximize total transmission gain (MTTG) is proposed. This scheme employs a new packet scheduling algorithm to select IDNC packets, which uses weight status feedback matrix (WSFM) directly. Analysis and simulation results indicate that the transmission efficiency approximate to the best existing approach maximum weight clique, but with much lower computational overhead. Hence, the energy efficiency achieves both in data transmission and processing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.133-142
• /
• 2007

WPANs are formed in relatively small area and a PNC that serves as a central control device plays an important role in the operation and organization of a piconet. Typical applications of WPANs are security system and health monitoring system. In these type of systems, guaranteeing realtime service is very important, and communications cannot take place when the PNC malfunctions. Thus, in this situation, it is necessary to elect a new PNC as soon as possible. For this reason, we propose distributed PNC election scheme that considers not only QoS support but also network connectivity to avoid possible network partition. Simulation results show proposed mechanism can select PNC with guaranteeing QoS and connectivity for a limited period.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.94-105
• /
• 2010

To detect faults in an inverter-fed permanent magnet synchronous motor (PMSM) drive under the circumstance having faults in a stator winding and inverter switch, an on-line basis fault detecting scheme during operation is presented. The proposed scheme is achieved by monitoring the second-order harmonic component in q-axis current and the fault is detected by comparing these components with those in normal conditions. The linear interpolation method is employed to determine the harmonic data in normal operating conditions. As soon as the fault is detected, the operating mode is changed to identify a fault type using the phase current waveform. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control algorithm is implemented using DSP TMS320F28335. Without requiring an additional hardware, the fault can be effectively detected by the proposed scheme during operation so long as the steady-state condition is satisfied.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.6
• /
• pp.73-81
• /
• 2009

TCP assumes that packet loss is always happened by congestionlike wired networks because is can not distinguish between congestion loss and transmission error loss,. This assumption results in unnecessary TCP performance degradation in wireless networks by reducing sender's congestion window size and retransmitting the lost packets. Also, repeated retransmissions loed to waste the limited battery power of mobile devices. In this paper, we propose the new congestion control scheme that add the algorithms monitoring networks states and the algorithms preventing congestion to improve TCP throughput performance and energy efficiency in wireless ad-hoc networks. Using NS2, we showd our scheme improved throughput performance and energy efficiency.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.114-120
• /
• 2008

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ${\bar{X}}-R$ control chart and ${\bar{X}}-S$ are most frequently used. When the production run is short and process parameter changes frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shift in the magnitude of CV. In this paper, we propose an CV-EWMA (exponentially weighted moving average) control chart which is effective in detecting a small shift of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. We suggest the values of design parameters and show the results of the performance study of CV-EWMA control chart by the use of average run length (ARL). When we compared the performance of CV-EWMA control chart with that of the CV control chart, we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1003-1011
• /
• 2011

In this paper, a real-time multi-source sensor data management system based on wireless sensor network is proposed and implemented. The proposed management system is designed to transmit the wireless data to the server in order to monitor and control the multi-source target's status efficiently by analyzing them. The proposed system is implemented to make it possible to control and transmit the wireless sensor data by classifying them, of which data are issued from the clustered sources composed of a number of the remote multiple sensors. In order to evaluate the performance of the proposed system, we measure and analyze both the transmission delay time according to the distance and the data loss rate issued from multiple data sources. From these results, it is verified that the proposed system has a good performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.875-880
• /
• 2015

Traditional semiconductor process control has been performed through statistical process control techniques in a constant process-recipe conditions. However, the complexity of the interior of the etching apparatus plasma physics, quantitative modeling of process conditions due to the many difficult features constraints apply simple SISO control scheme. The introduction of the Advanced Process Control (APC) as a way to overcome the limits has been using the APC process control methodology run-to-run, wafer-to-wafer, or the yield of the semiconductor manufacturing process to the real-time process control, performance, it is possible to improve production. In addition, it is possible to establish a hierarchical structure of the process control made by the process control unit and associated algorithms and etching apparatus, the process unit, the overall process. In this study, the research focused on the methodology and monitoring improvements in performance needed to consider the process management of future developments in the semiconductor manufacturing process in accordance with the age of the APC analysis in real applications of the semiconductor manufacturing process and process fault diagnosis and control techniques in progress.

• Convergence Security Journal
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2024

Although industrial control systems (ICSs) recently keep evolving with the introduction of Industrial IoT converging information technology (IT) and operational technology (OT), it also leads to a variety of threats and vulnerabilities, which was not experienced in the past ICS with no connection to the external network. Since various control command messages are sent to field devices of the ICS for the purpose of monitoring and controlling the operational processes, it is required to guarantee the message integrity as well as control center authentication. In case of the conventional message integrity codes and signature schemes based on symmetric keys and public keys, respectively, they are not suitable considering the asymmetry between the control center and field devices. Especially, compromised node attacks can be mounted against the symmetric-key-based schemes. In this paper, we propose message authentication scheme based on double hash chains constructed from cryptographic hash function without introducing other primitives, and then propose extension scheme using Merkle tree for multiple uses of the double hash chains. It is shown that the proposed scheme is much more efficient in computational complexity than other conventional schemes.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.83-94
• /
• 2010

Mobile network infrastructure is being completed with the development of hardware and software for mobile devices. Network in mobile devices has evolved for telematics that is expanded much more than its existing concept. Telematics is compound word that is formed from the words "telecommunication" and "informatics". It means that telematics performs control and monitoring service with using mobile device resources. These services provide their services for users' requests through wired or wireless network from mobile devices and server that offers contents and network service collects management information of mobile devices. Map service is one of the preferred services for many telematics users. However, mobile map service has a limit between traffic and information sharing. Therefore it is very important to supply their information for both service provider and terminal user. In this paper, we design a new interactive sketch map using routes and information on the space to be applied effectively, and provide an extended document format that is defined to an extensible and dynamic clustering scheme to have portability map service for mobile device.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.3
• /
• pp.160-167
• /
• 2018

In this paper, a black box, which is provided the reliability and user safety of home battery energy storage system connected with solar energy generation, is developed. In the developed scheme, a status and diagnosis data of battery management system, power conditioning system, solar energy generation and grid is measured. This status and diagnosis data is stored and displayed in the developed black box. In addition, this status and diagnosis data is stored and displayed in a monitoring system and a smart phone of user. A performance evaluation of the developed black box is carried out using emulator of home battery energy storage system connected with solar energy generation. Consequently, the developed black box is proved its superiority of the reliability and user safety.