• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.292-296
• /
• 2003

Autoclaving처리를 하지 않은 키토산과 autoclaving처리한 키토산과의 중금속 흡착실험을 해 본 결과 다음과 같은 결과를 도출 할 수 있었다. 1) 먼저 중금속간의 흡착능을 고찰하기 위하여 Langmuir와 Freundlich 흉착등온식에 적용시켜 본 결과 Freundlich 흡착등온식 보다는 Langmuir 흡착등온식이 보다 적합한 것으로 나타났다. 2) 시간에 따라서 autoclaving 처리한 키토산의 중금속 제거 가능성과 그 효율을 검토하기 위하여 각 중금속간의 Langmuir 흡착등온식을 이용하여 $q_{max}$를 나타냈다. 15 min > 60 min > 0 min 순으로 모든 중금속 제거 실험에서 15 min 동안 autoclaving 처리한 키토산의 중금속 흡착량이 가장 높은 것으로 나왔다. 그러므로 기존의 키토산 보다는 15 min동안 autoclaving 처리한 키토산이 중금속 제거에 더 좋은 흡착제로써 역할을 할 수 있을 것으로 판단된다. 3) 키토산을 이용한 중금속 제거에서는 $Pb^{2+}$ > $Cd^{2+}$ > $Cu^{2+}$ > $Cr^{3+}$순서로 제거가 되었다. 여러 연구자들의 실험 결과를 종합해 볼 때 Pb$^{2+}$가 중금속 중에 제거가 잘 된다는 연구 결과가 많이 발표 되었으며, $Cd^{2+}$, $Cu^{2+}$, $Cr^{3+}$의 경우에는 흡착제의 종류에 따라서 제거되는 순서가 다르다는 연구 결과들이 보고 되고 있다. 그러나 어떠한 이유로 중금속의 제거에 차이가 있는지에 대해서는 명확한 결론이 내려져 있지 않는 실정이다. 이러한 중금속간의 경쟁적인 관계에 대해 더 많은 세밀한 연구가 이루어져야 할 것 같다.는 0.52mg/$\ell$~0.99mg/$\ell$~의 범위이었다. 신천에 금호강물을 혼합한 이후에도 부유물질, 생화학적산소요구량, 암모니아태 질소, 총인 등의 농도가 개선되지 않았다. 즉 금호강물의 혼합은 신천수질환경사업소에서 배출되는 방류수에 함유되어 있을 2차 오염물질의 희석이라는 이점외의 수질개선효과는 확인되지 않았다.l years and a new type of transfer crane has been developed. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.뢰, 결속 등 다차원의 개념에 대한 심도 깊은 연구와 최근 제기되고 있는 이론

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.402-408
• /
• 2004

The purpose of this study is to investigate various conceptions of secondary school earth science teachers on some concepts in secondary school earth science courses; wind in cyclone, western intensification of ocean current, westerly wave, greenhouse effect, ozone layer and atmospheric pressure. The subject is 26 in-service teachers of earth science teachers. The results were analyzed on the view of teaching sources for earth science teachers. The results show that earth science teachers have also various misconceptions on some concepts selected in this study. A number of partial understandings were found that were not enough to apply to teaching concepts. Those misconceptions were related to gradient wind on wind in cyclone and frictional force, related to earth rotation on western intensification of ocean current, related to angular momentum conservation and related to the roles of westerly wave. And misconceptions on greenhouse effect are related to main role of greenhouse effect gases, related to sources of ozone gas and phenomenons by atmospheric pressure. The various understanding types found in this study could be apply to teach the selected concepts in secondary school earth science course.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.170-182
• /
• 2012

The purpose of this study was to develop learning materials based on the Kepler's abductive reasoning and to identify high school students' rule-inferring strategies on the law of planetary motion. The learning materials including the concepts of solar magnetic field, conservation of figure skater's angular momentum and Kepler's polyhedral theory were developed and the questions about Kepler's 2nd and 3rd law of planetary motion were also created. The participants were 79science high school students and 83general high school students. The patterns and properties of their abductive inference were analyzed. The findings revealed that the students showed 'incomplete analogy abduction', 'analogy abduction' and 'reconstruction' to generate the hypotheses concerning the Mars' motion related to the solar magnetic field. There were more general high school students who showed the incomplete analogy abduction than science high school students. On the other hand, there were more science high school students who showed the analogy abduction and reconstruction strategy than general high school students. Also, they showed 'incomplete analogy abduction', 'analogy abduction' and 'model construction and manipulation' to generate the hypotheses concerning Kepler's second law. A number of general high school students showed the incomplete analogy. It is suggested that because the analogy of figure skater cause the students' alternative framework to use, more detailed demonstration is necessary in class. In addition, students combined Kepler's polyhedral theory with their prior knowledge to infer Kepler's third law.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.114-121
• /
• 2010

Portland cement production is under critical review due to high amount of CO2 gas released to the atmosphere. Attempts to increase the utilization of a by-products such as fly ash and ground granulated blast-furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. However, most study deal only with alkali-activated ground granulated blast furnace slag or fly ash, as for the combined use of the both, little information is reported. In this study, we investigated the influence of mixture ratio of fly ash/ blast furnace slag tand curing condition on the flowability and compressive strength of mortar in oder to develop cementless alkali-activated concrete. In view of the results, we found out that the mixture ratio of fly ash/blast furnace slag always results to be significant factors. But the influence of curing temperature in the strength development of mortar is lower than the contribution due to other factors. At the age of 28days, the mixture 50% fly ash and 50% ground granulated blast furnace slag activated with 1:1 the mass ratio of 9M NaOH and sodium silicate, develop compressive strength of about 65 MPa under $20^{\circ}C$ curing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.11-22
• /
• 1987

A plane buoyant jet discharged vertically upward into a crossflow is analyzed by numerical solution of the governing equations of continuity, momentum and constituent transport. The turbulent transport is modelled by the Prandtl's mixing length theory. In the numerical solution procedure, the governing equations are transformed by stream function and vorticity transport, non-dimensionalyzed by discharge velocity, slot width, and parameters representing flow characteristics, and solved by Gauss-Seidel iteration method with successive underrelaxation. The numerical experiments were performed for the region of established flow of buoyant jet in the range of discharge densimetric Froude number of 4 to 32 and in the range of velocity ratio of 8 to 15, which is the ratio of discharge velocity to crossflow velocity. Variations of velocities and temperatures, flow patterns and vorticity patterns of receiving water due to buoyant jet were investigated. Also investigated are the effects of velocity ratio and discharge densimetric Froude number on the trajectories of buoyant jet. Computed are velocities, temperatures and local densimetric Froude numbers along the trajectory of the buoyant jet. Spreading rate and dispersion ratio were analyzed in terms of discharge densimetric Froude number, local densimetric Froude number and distance from the source along the jet trajectory. It was noted that the similarity law holds in both the profiles of velocity and temperatures across the jet trajectory and the integral type analysis of Gaussian distribution is applicable.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.223-229
• /
• 2015

In this study, the effects of the leakage flow between the baffle and tube bundles on the performance of a shell and tube heat exchanger (STHE) were examined using the commercial software ANSYS FLUENT v.14. A computational fluid dynamics model was developed for a small STHE with five different cases for the ratio of the leakage cross-sectional area to the baffle cross-sectional area, ranging from 0 to 40%, in order to determine the optimum leakage flow corresponding to the maximum outlet temperature. Using fixed tube wall and inlet temperatures for the shell side of the STHE, the flow and temperature fields were calculated by increasing the Reynolds number from 4952 to 14858. The present results showed that the outlet temperature, pressure drop, and heat transfer coefficient were strongly affected by the leakage flow, as well as the Reynolds number. In contrast with a previous researcher's finding that the leakage flow led to simultaneous decreases in the pressure drop and heat transfer rate, the present study found that the pertinent leakage flow provided momentum in the recirculation zone near the baffle plate and thus led to the maximum outlet temperature, a small pressure drop, and the highest heat transfer rate. The optimum leakage flow was shown in the case with a ratio of 20% among the five different cases.

• The Korean Journal of Health Service Management
• /
• v.2 no.1
• /
• pp.56-83
• /
• 2008

The purpose of this study was to provide basic materials needed to enhance quality of organizational life by identifying the improvements of labor union management in the perspective of general hospital organization management. The subject of this study were 686 employees in 12 General Hospitals in Metro Capital including Seoul. Materials were collected from administrators, nurses and medical technicians in target hospitals from March 20 to May 10, 2005 through survey questionnaires. The main results of this study were as follows: 1. the commitment level of the subjects according to their characteristics was higher in older employees than the younger ones, large family to support than small family to support and those who had higher positions in labor union. 2. The commitment level of the subjects according to the job and role related variables were higher those who had higher satisfaction level to their job and manager, role conflict in all hospitals. 3. The commitment level of the subjects according to union related variables, variables jointly controlled by union and employer was satistically significant positive correlation. In other words, the commitment level of the subjects according to the subjects' labor union involvement was higher in those who had higher satisfaction in labor union and perceived their colleagues' attitudes more positively in all hospitals. Regarding the atmosphere of the relationship between union and employer and the level of commitment in labor union, the better the atmosphere of the relationship between union and employer was, the higher the level of commitment in labor union was in all hospitals. 4. The results of multiple regression analysis shows that formal and informal socialization, union participation to the union management cooperation program, job satisfaction, satisfaction with the labor union's were all found as important antecedents of labor union commitment. 5. Job and role-related variables, union-related variables, variables jointly controlled by union and employer, and labor union commitment level were all found significantly different in accordance with the characteristics of unions concerned. To summarize study results, the level of commitment in labor union depends on job satisfaction, manager's attitudes, satisfaction to their jobs, union satisfaction, their colleagues attitudes toward union and the atmosphere of employer-employee relationship. Therefore hospital managers should have democratic and flexible attitudes toward labor union. Additionally, as formal and informal socialization, union participation to the union-management cooperation program is important determinant in union commitment, hospital managers should have countermeasures to enhance the colleague attitude and job satisfaction level of hospital employees. Since this study deals with psychological nature of workers not a few drawbacks and shortcomings may be detected in the finding. Nevertheless, the finding of this study, to become a momentum that will stimulate further research to detect all the cues of labor union commitment and to provide valuable reference in forming logical union commitment and labor union-management cooperation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.300-309
• /
• 2017

A spacecraft obtains a reaction momentum required for an orbit correction and an attitude control by exhausting a combustion gas through a small thruster in space. If the exhaust plume collides with spacecraft surfaces, it is very important to predict the exhaust plume behavior of the thruster when designing a satellite, because a generated disturbance force/torque, a heat load and a surface contamination can yield a life shortening and a reduction of the spacecraft function. The purpose of the present study is to ensure the core technology required for the spacecraft design by analyzing numerically the exhaust gas behavior of the 10 N class bipropellant thruster for an attitude control of the spacecraft. To do this, calculation results of chemical equilibrium reaction between a MMH for fuel and a NTO for oxidizer, and continuum region of the nozzle inside are implemented as inlet conditions of the DSMC method for the exhaust plume analysis. From these results, it is possible to predict a nonequilibrium expansion such as a species separation and a backflow in the vicinity of the bipropellant thruster nozzle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.323-334
• /
• 2020

Since boundary layer transition has a significant impact on the aero-thermodynamic performance of hypersonic flight vehicles, capability of accurate prediction of transition location is essential for design and performance analysis. In this study, γ-Re_θt model is improved to predict transition of hypersonic boundary layers and validated. A coefficient in the production term of the intermittency transport equation that affects the transition onset location is constructed and applied as a function of Mach number, wall temperature, and freestream stagnation temperature based on the similarity numerical solution of compressible boundary layer. To take into account a Mach number dependency of transition onset momentum thickness Reynolds number and transition length, additional correlation equations are determined as function of Mach number and applied to Re_θc and F_length correlations of the baseline model. The suggested model is implemented to a commercial CFD code in consideration of practical use. Analysis of hypersonic flat plate and circular cone boundary layers is carried out by using the model for validation purpose. An improvement of prediction capability with respect to variation of Mach number and unit Reynolds number is identified from the comparison with experimental data.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.122-142
• /
• 2003

This study examines the meaning of retro phenomenon and its background of establishment that showed in the pop culture. And it finds out the retro phenomena in the domestic fashion trends. And it defines the characteristics of dress and its ornament in the retro phenomena that have shown in the Korean movies since 1998. By doing this, it examines the relationship between movie dress and street fashion while it compares the styles in the 50s 70s with the retro fashion that is currently emerging. The results of the study are as follows. First, the hippie look in the 60s represented a distinctive characteristic of how they rejected traditional lifestyles. Hippie's romantic femininity that showed in the movie of 'Oollala Sisters' received a spotlight as a necessary style in the modern fashion trend. Second, while the funk look in the 70s was a style of disorder and disgust, the movie gives it a possibility of fashion with a converted sense as a vanguard fashion while embracing the funk look. Third, the layered look in the 70s was expressed with layered items, while the current layered look emphasizes layered textiles as shown in the movie of 'Hae-Jeok Became The Disco King'. Fourth, the feminine look which was a symbol of restraint shows a mixed style with delicate feminine items as shown in the movies, 'The Harmonium In My Memory' and 'Ditto'. Fifth, the training look that has two stripes as shown in the movie 'the Friends' is considered as casual wear, which is functional and easy to move at the end of the 20th century. Finally, the romantic images of school look, as shown in the movies 'the Friends' and 'Hae-Jeok Became The Disco King', show a renewed mixed & unique style. This study has its significance in the sense that it verifies the fact that the movie dress does not show the characteristics of the works that momentarily passes the screen, but it becomes a foundation of the future fashion design. At this time that Korean movies are highly developing, a through study on the movie fashion will not only give a direction of future in the modern fashion, but it will also give a developing momentum in the Korean movie dress.